TY  - CONF
AU  - Čarapić, Jelena
AU  - Milošević, Vladan
AU  - Ivošević, Branislav
AU  - Todorović, Dejan
AU  - Bartulović, Zoran
AU  - Jovanović, Vladimir
AU  - Milićević, Sonja
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1159
AB  - The part of the results, obtained during the technological investigations of the ore
from the deposit ’’Cerovo-C2’’ deposit - Cementation zone, are presented in this paper.
Investigations were undertaken at different flotation conditions (three collectors and grinding
fineness) in order to define possibility and optimal conditions for processing the ore from this
deposit. Obtained results indicate the possibility for producing the copper concentrate with the
commercial quality. Best results were obtained with the collector Flomin C4132 and grinding
fineness of 80 % below 0.074 mm, where the copper content in the rough concentrate was 4.64 %
and the copper recovery was 81.74 %.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling Conference
T1  - Investigation of the flotation parameters for the ore from ’’Cerovo – C2’’ deposit – cementation zone
EP  - 212
SP  - 208
ER  - 

@conference{
author = "Čarapić, Jelena and Milošević, Vladan and Ivošević, Branislav and Todorović, Dejan and Bartulović, Zoran and Jovanović, Vladimir and Milićević, Sonja",
year = "2019",
abstract = "The part of the results, obtained during the technological investigations of the ore
from the deposit ’’Cerovo-C2’’ deposit - Cementation zone, are presented in this paper.
Investigations were undertaken at different flotation conditions (three collectors and grinding
fineness) in order to define possibility and optimal conditions for processing the ore from this
deposit. Obtained results indicate the possibility for producing the copper concentrate with the
commercial quality. Best results were obtained with the collector Flomin C4132 and grinding
fineness of 80 % below 0.074 mm, where the copper content in the rough concentrate was 4.64 %
and the copper recovery was 81.74 %.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling Conference",
title = "Investigation of the flotation parameters for the ore from ’’Cerovo – C2’’ deposit – cementation zone",
pages = "212-208"
}

Čarapić, J., Milošević, V., Ivošević, B., Todorović, D., Bartulović, Z., Jovanović, V.,& Milićević, S.. (2019). Investigation of the flotation parameters for the ore from ’’Cerovo – C2’’ deposit – cementation zone. in XIII International Mineral Processing and Recycling Conference
Bor : University of Belgrade, Technical Faculty in Bor., 208-212.

Čarapić J, Milošević V, Ivošević B, Todorović D, Bartulović Z, Jovanović V, Milićević S. Investigation of the flotation parameters for the ore from ’’Cerovo – C2’’ deposit – cementation zone. in XIII International Mineral Processing and Recycling Conference. 2019;:208-212..

Čarapić, Jelena, Milošević, Vladan, Ivošević, Branislav, Todorović, Dejan, Bartulović, Zoran, Jovanović, Vladimir, Milićević, Sonja, "Investigation of the flotation parameters for the ore from ’’Cerovo – C2’’ deposit – cementation zone" in XIII International Mineral Processing and Recycling Conference (2019):208-212.

TY  - JOUR
AU  - Todorović, Dejan
AU  - Bartulović, Zoran
AU  - Jovanović, Vladimir
AU  - Ivošević, Branislav
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/450
AB  - This paper investigates grinding of mineral mixtures with different grindabilities in the Bond ball mill. Understanding the ore mixture grinding is of great importance in mineral processing. The energy required for crushing and grinding is presented by the Bond work index and is determined by means of Bond grindability test. This paper presents the experimental results of the Bond work index values obtained by the standard method on limestone and andesite samples, as well as composite samples made up from these ore in different weight ratios. Comparatively are shown the Bond work index values that are obtained by the mass fraction of components that make up the composite samples calculation and their differences from the real value. During the Bond work index value determining, changes in the composition of the grinding products and circulating mill charge were monitored.
PB  - Institut za rudarstvo i metalurgiju, Bor
T2  - Mining and Metallurgy Engineering Bor
T1  - The Bond work index of limestone and andesite mixtures
EP  - 28
IS  - 3-4
SP  - 21
DO  - 10.5937/mmeb1704021T
UR  - conv_427
ER  - 

@article{
author = "Todorović, Dejan and Bartulović, Zoran and Jovanović, Vladimir and Ivošević, Branislav",
year = "2017",
abstract = "This paper investigates grinding of mineral mixtures with different grindabilities in the Bond ball mill. Understanding the ore mixture grinding is of great importance in mineral processing. The energy required for crushing and grinding is presented by the Bond work index and is determined by means of Bond grindability test. This paper presents the experimental results of the Bond work index values obtained by the standard method on limestone and andesite samples, as well as composite samples made up from these ore in different weight ratios. Comparatively are shown the Bond work index values that are obtained by the mass fraction of components that make up the composite samples calculation and their differences from the real value. During the Bond work index value determining, changes in the composition of the grinding products and circulating mill charge were monitored.",
publisher = "Institut za rudarstvo i metalurgiju, Bor",
journal = "Mining and Metallurgy Engineering Bor",
title = "The Bond work index of limestone and andesite mixtures",
pages = "28-21",
number = "3-4",
doi = "10.5937/mmeb1704021T",
url = "conv_427"
}

Todorović, D., Bartulović, Z., Jovanović, V.,& Ivošević, B.. (2017). The Bond work index of limestone and andesite mixtures. in Mining and Metallurgy Engineering Bor
Institut za rudarstvo i metalurgiju, Bor.(3-4), 21-28.
https://doi.org/10.5937/mmeb1704021T
conv_427

Todorović D, Bartulović Z, Jovanović V, Ivošević B. The Bond work index of limestone and andesite mixtures. in Mining and Metallurgy Engineering Bor. 2017;(3-4):21-28.
doi:10.5937/mmeb1704021T
conv_427 .

Todorović, Dejan, Bartulović, Zoran, Jovanović, Vladimir, Ivošević, Branislav, "The Bond work index of limestone and andesite mixtures" in Mining and Metallurgy Engineering Bor, no. 3-4 (2017):21-28,
https://doi.org/10.5937/mmeb1704021T .,
conv_427 .

TY  - JOUR
AU  - Sekulić, Živko
AU  - Bartulović, Zoran
AU  - Mihajlović, Slavica
AU  - Ignjatović, Miroslav R.
AU  - Savić, Ljubinko
AU  - Jovanović, Vladimir
AU  - Nisić, Dragana
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/420
AB  - This review article surveys the subject of choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material by electromagnetic separator with magnetic field intensity of 1.4 T. The review is based on current experience of authors during research phase, as well as project development phase and initial operation of facilities in several locations. Quartz mineral raw material in those locations appeared as sandstone or as loose material. In addition to that, quartz raw material from those locations contained various impurities, i.e. Fe2O3 carriers. The choice of this process for Fe2O3 removal depended on mineralogical composition, shape and the content of minerals, and Fe2O3 removal rate after this process was from 29 to 65%. Magnetic separation is magnetic induction of 1.4 T. It is applied on commercial assortments which were previously subjected to washing and classification processes. It is always the assortment which has to have the lowest Fe2O3 content. The choice of, "dry" or, "wet" magnetic separation (with water flush) also depends on the fact whether this desired assortment is intended for market as dry or wet, as well as on the composition of magnetic impurities. In most cases, the process applied is the wet one.
PB  - Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas, Warszawa
T2  - Gospodarka Surowcami Mineralnymi-Mineral Resources Management
T1  - The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material
EP  - 106
IS  - 4
SP  - 93
VL  - 33
DO  - 10.1515/gospo-2017-0047
UR  - conv_813
ER  - 

@article{
author = "Sekulić, Živko and Bartulović, Zoran and Mihajlović, Slavica and Ignjatović, Miroslav R. and Savić, Ljubinko and Jovanović, Vladimir and Nisić, Dragana",
year = "2017",
abstract = "This review article surveys the subject of choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material by electromagnetic separator with magnetic field intensity of 1.4 T. The review is based on current experience of authors during research phase, as well as project development phase and initial operation of facilities in several locations. Quartz mineral raw material in those locations appeared as sandstone or as loose material. In addition to that, quartz raw material from those locations contained various impurities, i.e. Fe2O3 carriers. The choice of this process for Fe2O3 removal depended on mineralogical composition, shape and the content of minerals, and Fe2O3 removal rate after this process was from 29 to 65%. Magnetic separation is magnetic induction of 1.4 T. It is applied on commercial assortments which were previously subjected to washing and classification processes. It is always the assortment which has to have the lowest Fe2O3 content. The choice of, "dry" or, "wet" magnetic separation (with water flush) also depends on the fact whether this desired assortment is intended for market as dry or wet, as well as on the composition of magnetic impurities. In most cases, the process applied is the wet one.",
publisher = "Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas, Warszawa",
journal = "Gospodarka Surowcami Mineralnymi-Mineral Resources Management",
title = "The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material",
pages = "106-93",
number = "4",
volume = "33",
doi = "10.1515/gospo-2017-0047",
url = "conv_813"
}

Sekulić, Ž., Bartulović, Z., Mihajlović, S., Ignjatović, M. R., Savić, L., Jovanović, V.,& Nisić, D.. (2017). The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material. in Gospodarka Surowcami Mineralnymi-Mineral Resources Management
Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas, Warszawa., 33(4), 93-106.
https://doi.org/10.1515/gospo-2017-0047
conv_813

Sekulić Ž, Bartulović Z, Mihajlović S, Ignjatović MR, Savić L, Jovanović V, Nisić D. The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material. in Gospodarka Surowcami Mineralnymi-Mineral Resources Management. 2017;33(4):93-106.
doi:10.1515/gospo-2017-0047
conv_813 .

Sekulić, Živko, Bartulović, Zoran, Mihajlović, Slavica, Ignjatović, Miroslav R., Savić, Ljubinko, Jovanović, Vladimir, Nisić, Dragana, "The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material" in Gospodarka Surowcami Mineralnymi-Mineral Resources Management, 33, no. 4 (2017):93-106,
https://doi.org/10.1515/gospo-2017-0047 .,
conv_813 .

TY  - JOUR
AU  - Sekulić, Živko
AU  - Bartulović, Zoran
AU  - Mihajlović, Slavica
AU  - Ignjatović, Miroslav
AU  - Savić, Ljubinko
AU  - Jovanović, Vladimir
AU  - Nišić, Dragan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1078
AB  - This review article surveys the subject of choice of high gradient magnetic separation processes for removal of Fe2 O3 carriers from quartz raw material by electromagnetic separator with magnetic field intensity of 1.4 T. The review is based on current experience of authors during research phase, as well as project development phase and initial operation of facilities in several locations. Quartz mineral raw material in those locations appeared as sandstone or as loose material. In addition to that, quartz raw material from those locations contained various impurities, i.e. Fe2 O3 carriers. The choice of this process for Fe2 O3 removal depended on mineralogical composition, shape and the content of minerals, and Fe2O3 removal rate after this process was from 29 to 65%. Magnetic separation is magnetic induction of 1.4 T. It is applied on commercial assortments which were previously subjected to washing and classification processes. It is always the assortment which has to have the lowest Fe2 O3 content. The choice of „dry“ or „wet“ magnetic separation (with water flush) also depends on the fact whether this desired assortment is intended for market as dry or wet, as well as on the composition of magnetic impurities. In most cases, the process applied is the wet one.
PB  - Warszawa : Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas
T2  - Gospodarka Surowcami Mineralnymi-Mineral Resources Management
T1  - The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material
EP  - 106
IS  - 4
SP  - 93
VL  - 33
DO  - 10.1515/gospo-2017-0047
ER  - 

@article{
author = "Sekulić, Živko and Bartulović, Zoran and Mihajlović, Slavica and Ignjatović, Miroslav and Savić, Ljubinko and Jovanović, Vladimir and Nišić, Dragan",
year = "2017",
abstract = "This review article surveys the subject of choice of high gradient magnetic separation processes for removal of Fe2 O3 carriers from quartz raw material by electromagnetic separator with magnetic field intensity of 1.4 T. The review is based on current experience of authors during research phase, as well as project development phase and initial operation of facilities in several locations. Quartz mineral raw material in those locations appeared as sandstone or as loose material. In addition to that, quartz raw material from those locations contained various impurities, i.e. Fe2 O3 carriers. The choice of this process for Fe2 O3 removal depended on mineralogical composition, shape and the content of minerals, and Fe2O3 removal rate after this process was from 29 to 65%. Magnetic separation is magnetic induction of 1.4 T. It is applied on commercial assortments which were previously subjected to washing and classification processes. It is always the assortment which has to have the lowest Fe2 O3 content. The choice of „dry“ or „wet“ magnetic separation (with water flush) also depends on the fact whether this desired assortment is intended for market as dry or wet, as well as on the composition of magnetic impurities. In most cases, the process applied is the wet one.",
publisher = "Warszawa : Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas",
journal = "Gospodarka Surowcami Mineralnymi-Mineral Resources Management",
title = "The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material",
pages = "106-93",
number = "4",
volume = "33",
doi = "10.1515/gospo-2017-0047"
}

Sekulić, Ž., Bartulović, Z., Mihajlović, S., Ignjatović, M., Savić, L., Jovanović, V.,& Nišić, D.. (2017). The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material. in Gospodarka Surowcami Mineralnymi-Mineral Resources Management
Warszawa : Polska Akad Nauk, Polish Acad Sciences, Miner & Energy Econ Res Inst Pas., 33(4), 93-106.
https://doi.org/10.1515/gospo-2017-0047

Sekulić Ž, Bartulović Z, Mihajlović S, Ignjatović M, Savić L, Jovanović V, Nišić D. The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material. in Gospodarka Surowcami Mineralnymi-Mineral Resources Management. 2017;33(4):93-106.
doi:10.1515/gospo-2017-0047 .

Sekulić, Živko, Bartulović, Zoran, Mihajlović, Slavica, Ignjatović, Miroslav, Savić, Ljubinko, Jovanović, Vladimir, Nišić, Dragan, "The choice of high gradient magnetic separation processes for removal of Fe2O3 carriers from quartz raw material" in Gospodarka Surowcami Mineralnymi-Mineral Resources Management, 33, no. 4 (2017):93-106,
https://doi.org/10.1515/gospo-2017-0047 . .

Milošević, V., Ivošević, B., Bartulović, Z., Todorović, D., Čarapić, J., Milićević, S., Jovanović, V., Stojanović, J.,& Jogrić, R.. (2015). Novi tehnološki postupak za tretman kompleksne visokopiritične rude sa viših etaža površinskog kopa „Veliki Krivelj“ primenom savremenih flotacijskih kolektora. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Milošević V, Ivošević B, Bartulović Z, Todorović D, Čarapić J, Milićević S, Jovanović V, Stojanović J, Jogrić R. Novi tehnološki postupak za tretman kompleksne visokopiritične rude sa viših etaža površinskog kopa „Veliki Krivelj“ primenom savremenih flotacijskih kolektora. 2015;..

Milošević, Vladan, Ivošević, Branislav, Bartulović, Zoran, Todorović, Dejan, Čarapić, Jelena, Milićević, Sonja, Jovanović, Vladimir, Stojanović, Jovica, Jogrić, Robert, "Novi tehnološki postupak za tretman kompleksne visokopiritične rude sa viših etaža površinskog kopa „Veliki Krivelj“ primenom savremenih flotacijskih kolektora" (2015).

Milošević, V., Milićević, S., Trumić, M., Trumić, M., Bartulović, Z., Todorović, D., Jovanović, V., Ivošević, B., Čarapić, J., Jogrić, R.,& Adamović, V.. (2015). Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Milošević V, Milićević S, Trumić M, Trumić M, Bartulović Z, Todorović D, Jovanović V, Ivošević B, Čarapić J, Jogrić R, Adamović V. Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja. 2015;..

Milošević, Vladan, Milićević, Sonja, Trumić, Milan, Trumić, Maja, Bartulović, Zoran, Todorović, Dejan, Jovanović, Vladimir, Ivošević, Branislav, Čarapić, Jelena, Jogrić, Robert, Adamović, Vladimir, "Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja" (2015).

TY  - CONF
AU  - Todorović, Dejan
AU  - Milošević, Vladan
AU  - Bartulović, Zoran
AU  - Ivošević, Branislav
AU  - Čarapić, Jelena
AU  - Jovanović, Vladimir
AU  - Milićević, Sonja
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1109
AB  - The investigation results presented in this paper were performed in order to examine the possibility of efficient processing of valuable minerals from the rich complex polymetallic ore with extremely high content of copper, lead and zinc (0.86% Cu, 4.46% Pb and 2.51% Zn). These tests were carried out in pilot-plant facility of the Laboratory for mineral processing in Institute for Technology of Nuclear and Other Mineral Raw Materials(ITNMS). The role of scientific research is to thoroughly investigate the flotation concentration of valuable components and to confirm the laboratory tests on which the technological scheme to produce a separate concentrates of copper, lead and zinc is defined, on pilot-plant scale. While performing those pilot-plant tests, it was found that it is possible to produce three commercial products from this ore, following a copper, lead and zinc rough concentrates single-stage cleaning.
PB  - Belgrade : Mining Institute
PB  - Belgrade : Academy of Engineering Science of Serbia
PB  - University of Belgrade
C3  - XVI Balkan Mineral Processing Congress
T1  - Pilot-plant flotation testing of copper, lead and zinc minerals from rich polymetallic ore
EP  - 449
SP  - 441
ER  - 

@conference{
author = "Todorović, Dejan and Milošević, Vladan and Bartulović, Zoran and Ivošević, Branislav and Čarapić, Jelena and Jovanović, Vladimir and Milićević, Sonja",
year = "2015",
abstract = "The investigation results presented in this paper were performed in order to examine the possibility of efficient processing of valuable minerals from the rich complex polymetallic ore with extremely high content of copper, lead and zinc (0.86% Cu, 4.46% Pb and 2.51% Zn). These tests were carried out in pilot-plant facility of the Laboratory for mineral processing in Institute for Technology of Nuclear and Other Mineral Raw Materials(ITNMS). The role of scientific research is to thoroughly investigate the flotation concentration of valuable components and to confirm the laboratory tests on which the technological scheme to produce a separate concentrates of copper, lead and zinc is defined, on pilot-plant scale. While performing those pilot-plant tests, it was found that it is possible to produce three commercial products from this ore, following a copper, lead and zinc rough concentrates single-stage cleaning.",
publisher = "Belgrade : Mining Institute, Belgrade : Academy of Engineering Science of Serbia, University of Belgrade",
journal = "XVI Balkan Mineral Processing Congress",
title = "Pilot-plant flotation testing of copper, lead and zinc minerals from rich polymetallic ore",
pages = "449-441"
}

Todorović, D., Milošević, V., Bartulović, Z., Ivošević, B., Čarapić, J., Jovanović, V.,& Milićević, S.. (2015). Pilot-plant flotation testing of copper, lead and zinc minerals from rich polymetallic ore. in XVI Balkan Mineral Processing Congress
Belgrade : Mining Institute., 441-449.

Todorović D, Milošević V, Bartulović Z, Ivošević B, Čarapić J, Jovanović V, Milićević S. Pilot-plant flotation testing of copper, lead and zinc minerals from rich polymetallic ore. in XVI Balkan Mineral Processing Congress. 2015;:441-449..

Todorović, Dejan, Milošević, Vladan, Bartulović, Zoran, Ivošević, Branislav, Čarapić, Jelena, Jovanović, Vladimir, Milićević, Sonja, "Pilot-plant flotation testing of copper, lead and zinc minerals from rich polymetallic ore" in XVI Balkan Mineral Processing Congress (2015):441-449.

TY  - CONF
AU  - Čarapić, Jelena
AU  - Ivošević, Branislav
AU  - Milošević, Vladan
AU  - Bartulović, Zoran
AU  - Todorović, Dejan
AU  - Jovanović, Vladimir
AU  - Milićević, Sonja
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1160
AB  - This paper presents part of a complex technological flotation investigations of copper ore from the upper layers deposit "Veliki Krivelj". Ore copper content is in the average range and sulfur content is significantly higher than usual. High content of sulfur derives from the increased content of mineral pyrite, which is very difficult to depress in flotation. Because of this, it is very difficult to control and to stabilize flotation process and technological results are below the planed one. In order to increase the flotation process efficiency and the copper concentrate quality, technological laboratory tests were conducted in the ITNMS Mineral Processing laboratory. Investigations were undertaken with an aim to examine the possibility of applying new collector structures (manuf. Flomin) which are implemented effectively for the ores with similar features in the World. The results in paper presents technological effects achieved by applying the tested collector and compared to the reagent that is used in the Flotation Plant "Veliki Krivelj ". Because of the good results, which showed that the tested collector has a high selectivity for copper, it was decided to be tested on an industrial scale.
PB  - Belgrade : Mining Institute
PB  - Belgrade : Academy of Engineering Science of Serbia
PB  - Belgrade : University of Belgrade
C3  - XVI Balkan Mineral Processing Congress
T1  - The possibility of applying contemporary flotation collectors to improve the technological effects of processing complex ore With pyrite high content from the upper layers deposit „Veliki Krivelj“
EP  - 455
SP  - 449
ER  - 

@conference{
author = "Čarapić, Jelena and Ivošević, Branislav and Milošević, Vladan and Bartulović, Zoran and Todorović, Dejan and Jovanović, Vladimir and Milićević, Sonja",
year = "2015",
abstract = "This paper presents part of a complex technological flotation investigations of copper ore from the upper layers deposit "Veliki Krivelj". Ore copper content is in the average range and sulfur content is significantly higher than usual. High content of sulfur derives from the increased content of mineral pyrite, which is very difficult to depress in flotation. Because of this, it is very difficult to control and to stabilize flotation process and technological results are below the planed one. In order to increase the flotation process efficiency and the copper concentrate quality, technological laboratory tests were conducted in the ITNMS Mineral Processing laboratory. Investigations were undertaken with an aim to examine the possibility of applying new collector structures (manuf. Flomin) which are implemented effectively for the ores with similar features in the World. The results in paper presents technological effects achieved by applying the tested collector and compared to the reagent that is used in the Flotation Plant "Veliki Krivelj ". Because of the good results, which showed that the tested collector has a high selectivity for copper, it was decided to be tested on an industrial scale.",
publisher = "Belgrade : Mining Institute, Belgrade : Academy of Engineering Science of Serbia, Belgrade : University of Belgrade",
journal = "XVI Balkan Mineral Processing Congress",
title = "The possibility of applying contemporary flotation collectors to improve the technological effects of processing complex ore With pyrite high content from the upper layers deposit „Veliki Krivelj“",
pages = "455-449"
}

Čarapić, J., Ivošević, B., Milošević, V., Bartulović, Z., Todorović, D., Jovanović, V.,& Milićević, S.. (2015). The possibility of applying contemporary flotation collectors to improve the technological effects of processing complex ore With pyrite high content from the upper layers deposit „Veliki Krivelj“. in XVI Balkan Mineral Processing Congress
Belgrade : Mining Institute., 449-455.

Čarapić J, Ivošević B, Milošević V, Bartulović Z, Todorović D, Jovanović V, Milićević S. The possibility of applying contemporary flotation collectors to improve the technological effects of processing complex ore With pyrite high content from the upper layers deposit „Veliki Krivelj“. in XVI Balkan Mineral Processing Congress. 2015;:449-455..

Čarapić, Jelena, Ivošević, Branislav, Milošević, Vladan, Bartulović, Zoran, Todorović, Dejan, Jovanović, Vladimir, Milićević, Sonja, "The possibility of applying contemporary flotation collectors to improve the technological effects of processing complex ore With pyrite high content from the upper layers deposit „Veliki Krivelj“" in XVI Balkan Mineral Processing Congress (2015):449-455.

TY  - CONF
AU  - Jovanović, Ivana
AU  - Andrić, Ljubiša
AU  - Milošević, Vladan
AU  - Todorović, Dejan
AU  - Bartulović, Zoran
AU  - Mikić, Miomir
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1112
AB  - The results shown in this paper represent a part of technological testings performed to evaluate the possibility of copper and precious metals valorization from ore deposit Tenka 3. Concentration of useful minerals was achieved through flotation method including rougher and scavenger circuits. During the experimental procedure AEROPHINE 3418A Promoter (phosphine- based collector) and AERO 5500 Promoter (ethoxycarbonyl thiourea based collector) were used for the hydrophobization of mineral surfaces. pH value of flotation pulp was 10.5 in every experiment. Grinding fineness varied from 56% to 65% of class –0.074 mm. The highest recoveries of copper and precious metals are obtained at grinding fineness of 60% –0.074 mm, while the highest grades are obtained at grinding fineness of 56% –0.074 mm.
PB  - Belgrade : Mining Institute Belgrade
C3  - XVI Balkan Mineral Processing Congress
T1  - Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness
EP  - 468
SP  - 465
ER  - 

@conference{
author = "Jovanović, Ivana and Andrić, Ljubiša and Milošević, Vladan and Todorović, Dejan and Bartulović, Zoran and Mikić, Miomir",
year = "2015",
abstract = "The results shown in this paper represent a part of technological testings performed to evaluate the possibility of copper and precious metals valorization from ore deposit Tenka 3. Concentration of useful minerals was achieved through flotation method including rougher and scavenger circuits. During the experimental procedure AEROPHINE 3418A Promoter (phosphine- based collector) and AERO 5500 Promoter (ethoxycarbonyl thiourea based collector) were used for the hydrophobization of mineral surfaces. pH value of flotation pulp was 10.5 in every experiment. Grinding fineness varied from 56% to 65% of class –0.074 mm. The highest recoveries of copper and precious metals are obtained at grinding fineness of 60% –0.074 mm, while the highest grades are obtained at grinding fineness of 56% –0.074 mm.",
publisher = "Belgrade : Mining Institute Belgrade",
journal = "XVI Balkan Mineral Processing Congress",
title = "Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness",
pages = "468-465"
}

Jovanović, I., Andrić, L., Milošević, V., Todorović, D., Bartulović, Z.,& Mikić, M.. (2015). Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness. in XVI Balkan Mineral Processing Congress
Belgrade : Mining Institute Belgrade., 465-468.

Jovanović I, Andrić L, Milošević V, Todorović D, Bartulović Z, Mikić M. Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness. in XVI Balkan Mineral Processing Congress. 2015;:465-468..

Jovanović, Ivana, Andrić, Ljubiša, Milošević, Vladan, Todorović, Dejan, Bartulović, Zoran, Mikić, Miomir, "Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness" in XVI Balkan Mineral Processing Congress (2015):465-468.

TY  - CONF
AU  - Bartulović, Zoran
AU  - Todorović, Dejan
AU  - Milošević, Vladan
AU  - Ivošević, Branislav
AU  - Čarapić, Jelena
AU  - Jovanović, Vladimir
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1077
AB  - Some parts of porphyry copper ore deposit ”Veliki Krivelj” (Bor, Serbia) carry a high content of pyrite, which, with the existing technology of selective flotation, using potassium ethyl xanthate as copper minerals collector, results in low copper grade of final copper concentrate. Laboratory flotation tests were performed, with main goal to replace potassium ethyl xanthate, using other, more selective against pyrite collectors, while retaining other technological parameters under the existing flotation process. In this paper, the part of results from those experiments, using isopropyl ethyl thionocarbamate as collector to compare them to potassium ethyl xanthate, are presented. The study included the flotation experiments with different doses of collectors at different pH values, as well as experiments of flotation kinetics and cleaning of rough concentrate. Selectivity of those two collectors was measured watching sulfur grade and recovery in rough copper concentrate, obtained under the same conditions. Sulphur recovery in copper rough concentrate, produced using potassium ethyl xanthate was over 80% and Cu grade was 1,29%, while only 12-18% of sulphur recovery with about 3% of Cu grade was optained using isopropyl ethyl thionocarbamate, even at lower consuption. Both collectors produced rough concentrates with the similar Cu recovery, so this kind of selective collectors must be considered in case of processing this tipe of ore.
PB  - Belgrade : Mining Institute
PB  - Belgrade : Academy of Engineering Science of Serbia
C3  - XVI Balkan Mineral Processing Congress
T1  - Copper minerals flotation collector selection for processing of the ore from pyrite–rich parts from „Veliki Krivelj“ deposit
EP  - 441
SP  - 437
ER  - 

@conference{
author = "Bartulović, Zoran and Todorović, Dejan and Milošević, Vladan and Ivošević, Branislav and Čarapić, Jelena and Jovanović, Vladimir",
year = "2015",
abstract = "Some parts of porphyry copper ore deposit ”Veliki Krivelj” (Bor, Serbia) carry a high content of pyrite, which, with the existing technology of selective flotation, using potassium ethyl xanthate as copper minerals collector, results in low copper grade of final copper concentrate. Laboratory flotation tests were performed, with main goal to replace potassium ethyl xanthate, using other, more selective against pyrite collectors, while retaining other technological parameters under the existing flotation process. In this paper, the part of results from those experiments, using isopropyl ethyl thionocarbamate as collector to compare them to potassium ethyl xanthate, are presented. The study included the flotation experiments with different doses of collectors at different pH values, as well as experiments of flotation kinetics and cleaning of rough concentrate. Selectivity of those two collectors was measured watching sulfur grade and recovery in rough copper concentrate, obtained under the same conditions. Sulphur recovery in copper rough concentrate, produced using potassium ethyl xanthate was over 80% and Cu grade was 1,29%, while only 12-18% of sulphur recovery with about 3% of Cu grade was optained using isopropyl ethyl thionocarbamate, even at lower consuption. Both collectors produced rough concentrates with the similar Cu recovery, so this kind of selective collectors must be considered in case of processing this tipe of ore.",
publisher = "Belgrade : Mining Institute, Belgrade : Academy of Engineering Science of Serbia",
journal = "XVI Balkan Mineral Processing Congress",
title = "Copper minerals flotation collector selection for processing of the ore from pyrite–rich parts from „Veliki Krivelj“ deposit",
pages = "441-437"
}

Bartulović, Z., Todorović, D., Milošević, V., Ivošević, B., Čarapić, J.,& Jovanović, V.. (2015). Copper minerals flotation collector selection for processing of the ore from pyrite–rich parts from „Veliki Krivelj“ deposit. in XVI Balkan Mineral Processing Congress
Belgrade : Mining Institute., 437-441.

Bartulović Z, Todorović D, Milošević V, Ivošević B, Čarapić J, Jovanović V. Copper minerals flotation collector selection for processing of the ore from pyrite–rich parts from „Veliki Krivelj“ deposit. in XVI Balkan Mineral Processing Congress. 2015;:437-441..

Bartulović, Zoran, Todorović, Dejan, Milošević, Vladan, Ivošević, Branislav, Čarapić, Jelena, Jovanović, Vladimir, "Copper minerals flotation collector selection for processing of the ore from pyrite–rich parts from „Veliki Krivelj“ deposit" in XVI Balkan Mineral Processing Congress (2015):437-441.

TY  - CONF
AU  - Jovanović, I.
AU  - Milošević, Vladan
AU  - Todorović, Dejan
AU  - Andrić, Ljubiša
AU  - Bartulović, Zoran
AU  - Milićević, Sonja
PY  - 2012
UR  - https://ritnms.itnms.ac.rs/handle/123456789/245
AB  - The Tenka deposits (which include Tenka 1, Tenka 2, and Tenka 3 deposits, located in eastern Serbia) belong to polymetallic deposits and besides the copper they contain lead and zinc minerals in a certain content. From this perspective, defining optimal ore processing conditions (due to complex ore characteristics) and obtaining commercial product with satisfactory technological properties, represents complex task and requires serious research and examinations. This paper presents a part of technological investigations performed to determine the possibility of copper and precious metals valorization from the ore deposit Tenka 3, using a flotation concentration method. During the experimental procedure, sodium isopropyl xanthate was used as the collector, while the pH value of flotation pulp varied from 9.9 to 11.6. The results shown that the satisfactory recoveries of copper and precious metals could be obtained by this procedure (at the appropriate pH value of pulp), but the quality of the rough flotation concentrate was basically low.
C3  - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012
T1  - Influence of sodium isopropyl xanthate on the recovery of copper and precious metals from ore deposit Tenka-3
EP  - 400
SP  - 395
VL  - 2
UR  - conv_1061
ER  - 

@conference{
author = "Jovanović, I. and Milošević, Vladan and Todorović, Dejan and Andrić, Ljubiša and Bartulović, Zoran and Milićević, Sonja",
year = "2012",
abstract = "The Tenka deposits (which include Tenka 1, Tenka 2, and Tenka 3 deposits, located in eastern Serbia) belong to polymetallic deposits and besides the copper they contain lead and zinc minerals in a certain content. From this perspective, defining optimal ore processing conditions (due to complex ore characteristics) and obtaining commercial product with satisfactory technological properties, represents complex task and requires serious research and examinations. This paper presents a part of technological investigations performed to determine the possibility of copper and precious metals valorization from the ore deposit Tenka 3, using a flotation concentration method. During the experimental procedure, sodium isopropyl xanthate was used as the collector, while the pH value of flotation pulp varied from 9.9 to 11.6. The results shown that the satisfactory recoveries of copper and precious metals could be obtained by this procedure (at the appropriate pH value of pulp), but the quality of the rough flotation concentrate was basically low.",
journal = "12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012",
title = "Influence of sodium isopropyl xanthate on the recovery of copper and precious metals from ore deposit Tenka-3",
pages = "400-395",
volume = "2",
url = "conv_1061"
}

Jovanović, I., Milošević, V., Todorović, D., Andrić, L., Bartulović, Z.,& Milićević, S.. (2012). Influence of sodium isopropyl xanthate on the recovery of copper and precious metals from ore deposit Tenka-3. in 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012, 2, 395-400.
conv_1061

Jovanović I, Milošević V, Todorović D, Andrić L, Bartulović Z, Milićević S. Influence of sodium isopropyl xanthate on the recovery of copper and precious metals from ore deposit Tenka-3. in 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012. 2012;2:395-400.
conv_1061 .

Jovanović, I., Milošević, Vladan, Todorović, Dejan, Andrić, Ljubiša, Bartulović, Zoran, Milićević, Sonja, "Influence of sodium isopropyl xanthate on the recovery of copper and precious metals from ore deposit Tenka-3" in 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012, 2 (2012):395-400,
conv_1061 .

TY  - CONF
AU  - Radulović, Dragan
AU  - Jovanović, Vladimir
AU  - Sekulić, Živko
AU  - Canić, Neda
AU  - Bartulović, Zoran
PY  - 2006
UR  - https://ritnms.itnms.ac.rs/handle/123456789/97
AB  - Results on thickening and filtration of waste materials from flotation plant "Feldspar" - Bujanovac are presented in this paper. The thickening and filtration waste material samples after magnetic separation on class -0,063 mm in laboratory conditions are performed. On the basis of dewatering tests, a aflowsheet along with thickening time is determined.
C3  - IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress
T1  - Use of waste materials from plant "feldspar"- Bujanovac in ceramics industry
EP  - 943
SP  - 939
UR  - conv_1115
ER  - 

@conference{
author = "Radulović, Dragan and Jovanović, Vladimir and Sekulić, Živko and Canić, Neda and Bartulović, Zoran",
year = "2006",
abstract = "Results on thickening and filtration of waste materials from flotation plant "Feldspar" - Bujanovac are presented in this paper. The thickening and filtration waste material samples after magnetic separation on class -0,063 mm in laboratory conditions are performed. On the basis of dewatering tests, a aflowsheet along with thickening time is determined.",
journal = "IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress",
title = "Use of waste materials from plant "feldspar"- Bujanovac in ceramics industry",
pages = "943-939",
url = "conv_1115"
}

Radulović, D., Jovanović, V., Sekulić, Ž., Canić, N.,& Bartulović, Z.. (2006). Use of waste materials from plant "feldspar"- Bujanovac in ceramics industry. in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress, 939-943.
conv_1115

Radulović D, Jovanović V, Sekulić Ž, Canić N, Bartulović Z. Use of waste materials from plant "feldspar"- Bujanovac in ceramics industry. in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress. 2006;:939-943.
conv_1115 .

Radulović, Dragan, Jovanović, Vladimir, Sekulić, Živko, Canić, Neda, Bartulović, Zoran, "Use of waste materials from plant "feldspar"- Bujanovac in ceramics industry" in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress (2006):939-943,
conv_1115 .

TY  - CONF
AU  - Bartulović, Zoran
AU  - Canić, Neda
AU  - Radosavljević, Slobodan
AU  - Radulović, Dragan
PY  - 2006
UR  - https://ritnms.itnms.ac.rs/handle/123456789/96
AB  - This work presents the results of complex laboratory investigation carried out in order to determine the possibilities to produce quality concentrates of wolfram and antimony minerals out of polymetallic wolfram-antimony ore from Osanica deposit, near Petrovac na Mlavi in Serbia. Physical, chemical and mineralogical characterization of raw sample indicated that this is a high grade poly-metallic ore, having 1.67% of wolframite and 4.31% of antimonite. Besides valuable minerals, the presence of SiO2 is determined with the share of over 80% and occurrence of the iron minerals is predominantly in the form of pyrite. It is also found that surfaces of wolfram and antimony minerals are oxidized. Technological aspects of beneficiation included grinding tests as well as pre-concentration and concentration tests of wolfram minerals using combination of gravity, magnetic and flotation concentration methods. Bond index, established in grinding tests, accounted 14 kWh/t. Pre-concentration tests, performed on fraction -4+0 mm, did not give positive results due to high content of intergrowth valuable particles with gangue minerals. Results of gravitational and magnetic concentration, applied on fraction -0.5+0.1 mm, showed the possibility to produce wolframite type of the concentrate with over 60% WO3 and quality concentrate of antimony minerals with over 47% Sb. The main scope of this investigation was to evaluate the technological flowsheet of the preparation process for this specific ore, according to parameters that provide the best possible results for selective production of high quality concentrates of wolfram and antimony minerals.
C3  - IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress
T1  - Laboratory investigation of valuable minerals concentration from poly-metallic wolfram-antimony ore deposit "osanica"
EP  - 368
SP  - 363
UR  - conv_1109
ER  - 

@conference{
author = "Bartulović, Zoran and Canić, Neda and Radosavljević, Slobodan and Radulović, Dragan",
year = "2006",
abstract = "This work presents the results of complex laboratory investigation carried out in order to determine the possibilities to produce quality concentrates of wolfram and antimony minerals out of polymetallic wolfram-antimony ore from Osanica deposit, near Petrovac na Mlavi in Serbia. Physical, chemical and mineralogical characterization of raw sample indicated that this is a high grade poly-metallic ore, having 1.67% of wolframite and 4.31% of antimonite. Besides valuable minerals, the presence of SiO2 is determined with the share of over 80% and occurrence of the iron minerals is predominantly in the form of pyrite. It is also found that surfaces of wolfram and antimony minerals are oxidized. Technological aspects of beneficiation included grinding tests as well as pre-concentration and concentration tests of wolfram minerals using combination of gravity, magnetic and flotation concentration methods. Bond index, established in grinding tests, accounted 14 kWh/t. Pre-concentration tests, performed on fraction -4+0 mm, did not give positive results due to high content of intergrowth valuable particles with gangue minerals. Results of gravitational and magnetic concentration, applied on fraction -0.5+0.1 mm, showed the possibility to produce wolframite type of the concentrate with over 60% WO3 and quality concentrate of antimony minerals with over 47% Sb. The main scope of this investigation was to evaluate the technological flowsheet of the preparation process for this specific ore, according to parameters that provide the best possible results for selective production of high quality concentrates of wolfram and antimony minerals.",
journal = "IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress",
title = "Laboratory investigation of valuable minerals concentration from poly-metallic wolfram-antimony ore deposit "osanica"",
pages = "368-363",
url = "conv_1109"
}

Bartulović, Z., Canić, N., Radosavljević, S.,& Radulović, D.. (2006). Laboratory investigation of valuable minerals concentration from poly-metallic wolfram-antimony ore deposit "osanica". in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress, 363-368.
conv_1109

Bartulović Z, Canić N, Radosavljević S, Radulović D. Laboratory investigation of valuable minerals concentration from poly-metallic wolfram-antimony ore deposit "osanica". in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress. 2006;:363-368.
conv_1109 .

Bartulović, Zoran, Canić, Neda, Radosavljević, Slobodan, Radulović, Dragan, "Laboratory investigation of valuable minerals concentration from poly-metallic wolfram-antimony ore deposit "osanica"" in IMPC 2006 - Proceedings of 23rd International Mineral Processing Congress (2006):363-368,
conv_1109 .

TY  - JOUR
AU  - Sekulić, Živko
AU  - Canić, Neda
AU  - Bartulović, Zoran
AU  - Daković, Aleksandra
PY  - 2004
UR  - https://ritnms.itnms.ac.rs/handle/123456789/67
AB  - The potential application of different cation collectors in the flotation concentration of mica, feldspar and quartz sand has been investigated. Raw materials (Bujanovac and Ub) from two localities in Serbia were used. The results showed that for flotation of feldspars, Aero 3030C performed better than Flotigam DAT. Aero 3030C was more selective, and with its application a higher mass recovery of feldspar was obtained. In particular, the mass recovery of feldspar was 19.58% when Aero 3030C was applied and 7.58% when Flotigam DAT was used. However, the chemical compositions of the feldspar concentrates were not significantly different no matter which of these reagents was used. For the flotation of impurities from quartz sand, Aero 3030C was better than a combination of R 825 and Armak C. When Aero 3030C was used, a higher quality of quartz sand concentrate was obtained than when a combination of these collectors was applied. The mass recovery of quartz sand was almost the same: 64.47% when Aero 3030C was used and 61.72% when a combination of Aero 825 and Armac C was used.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Minerals Engineering
T1  - Application of different collectors in the flotation concentration of feldspar, mica and quartz sand
EP  - 80
IS  - 1
SP  - 77
VL  - 17
DO  - 10.1016/j.mineng.2003.10.004
UR  - conv_471
ER  - 

@article{
author = "Sekulić, Živko and Canić, Neda and Bartulović, Zoran and Daković, Aleksandra",
year = "2004",
abstract = "The potential application of different cation collectors in the flotation concentration of mica, feldspar and quartz sand has been investigated. Raw materials (Bujanovac and Ub) from two localities in Serbia were used. The results showed that for flotation of feldspars, Aero 3030C performed better than Flotigam DAT. Aero 3030C was more selective, and with its application a higher mass recovery of feldspar was obtained. In particular, the mass recovery of feldspar was 19.58% when Aero 3030C was applied and 7.58% when Flotigam DAT was used. However, the chemical compositions of the feldspar concentrates were not significantly different no matter which of these reagents was used. For the flotation of impurities from quartz sand, Aero 3030C was better than a combination of R 825 and Armak C. When Aero 3030C was used, a higher quality of quartz sand concentrate was obtained than when a combination of these collectors was applied. The mass recovery of quartz sand was almost the same: 64.47% when Aero 3030C was used and 61.72% when a combination of Aero 825 and Armac C was used.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Minerals Engineering",
title = "Application of different collectors in the flotation concentration of feldspar, mica and quartz sand",
pages = "80-77",
number = "1",
volume = "17",
doi = "10.1016/j.mineng.2003.10.004",
url = "conv_471"
}

Sekulić, Ž., Canić, N., Bartulović, Z.,& Daković, A.. (2004). Application of different collectors in the flotation concentration of feldspar, mica and quartz sand. in Minerals Engineering
Pergamon-Elsevier Science Ltd, Oxford., 17(1), 77-80.
https://doi.org/10.1016/j.mineng.2003.10.004
conv_471

Sekulić Ž, Canić N, Bartulović Z, Daković A. Application of different collectors in the flotation concentration of feldspar, mica and quartz sand. in Minerals Engineering. 2004;17(1):77-80.
doi:10.1016/j.mineng.2003.10.004
conv_471 .

Sekulić, Živko, Canić, Neda, Bartulović, Zoran, Daković, Aleksandra, "Application of different collectors in the flotation concentration of feldspar, mica and quartz sand" in Minerals Engineering, 17, no. 1 (2004):77-80,
https://doi.org/10.1016/j.mineng.2003.10.004 .,
conv_471 .

TY  - JOUR
AU  - Sekulić, Živko
AU  - Canić, Neda
AU  - Bartulović, Zoran
AU  - Milošević, Vladan
AU  - Mihajlović, Slavica
PY  - 2002
UR  - https://ritnms.itnms.ac.rs/handle/123456789/37
AB  - U ovom radu su dati rezultati laboratorijskih ispitivanja mogućnosti dobijanja koncentrata kvarcnog peska iz sirovine ležišta 'Avala' - Ub koji bi se koristio u staklarskoj industriji za proizvodnju stakla po sistemu 'Float'. Obavljeni su eksperimenti klasiranja, atricionog ribanja, magnetne koncentracije i flotacijske koncentracije. Ispitivanja su pokazala da se postupkom flotacijske koncentracije može dobiti kvalitetan koncentrat kvarcnog peska za staklarsku industriju. Naime, dobijen je koncentrat kvarcnog peska sa sadržajem SiO2 99.28%, 0.26% Al2O3, 0.031% Fe2O3i 0.055% K2O+Na2O. .
AB  - In this work are given the results of the laboratory researches of the possibilities of getting the concentrate of the quartz sand from the row material from the bad Avala-Ub, which would be used, in the glass industry for the producing of glass according the system Float. There are published the results of sizing atritioned scrubbing, magnetic concentration ad flotation concentration. Researches showed that by the procedure of flotation concentration we can get the high quality of concentrate the quartz send for the glass industry. Particularly, it is got the concentrate the quartz sand with the content SiO2 99,28%, 0,26% Al2O% 0,031% Fe2O3 and 0,055% K2O+Na2O. .
PB  - Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd
T2  - Izgradnja
T1  - Kvarcni pesak ležišta 'Avala' - Ub kao sirovina za staklarsku industriju
T1  - Quartz sand from deposit 'Avala' - Ub for the glass industry
EP  - 418
IS  - 12
SP  - 415
VL  - 56
UR  - conv_90
ER  - 

@article{
author = "Sekulić, Živko and Canić, Neda and Bartulović, Zoran and Milošević, Vladan and Mihajlović, Slavica",
year = "2002",
abstract = "U ovom radu su dati rezultati laboratorijskih ispitivanja mogućnosti dobijanja koncentrata kvarcnog peska iz sirovine ležišta 'Avala' - Ub koji bi se koristio u staklarskoj industriji za proizvodnju stakla po sistemu 'Float'. Obavljeni su eksperimenti klasiranja, atricionog ribanja, magnetne koncentracije i flotacijske koncentracije. Ispitivanja su pokazala da se postupkom flotacijske koncentracije može dobiti kvalitetan koncentrat kvarcnog peska za staklarsku industriju. Naime, dobijen je koncentrat kvarcnog peska sa sadržajem SiO2 99.28%, 0.26% Al2O3, 0.031% Fe2O3i 0.055% K2O+Na2O. ., In this work are given the results of the laboratory researches of the possibilities of getting the concentrate of the quartz sand from the row material from the bad Avala-Ub, which would be used, in the glass industry for the producing of glass according the system Float. There are published the results of sizing atritioned scrubbing, magnetic concentration ad flotation concentration. Researches showed that by the procedure of flotation concentration we can get the high quality of concentrate the quartz send for the glass industry. Particularly, it is got the concentrate the quartz sand with the content SiO2 99,28%, 0,26% Al2O% 0,031% Fe2O3 and 0,055% K2O+Na2O. .",
publisher = "Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd",
journal = "Izgradnja",
title = "Kvarcni pesak ležišta 'Avala' - Ub kao sirovina za staklarsku industriju, Quartz sand from deposit 'Avala' - Ub for the glass industry",
pages = "418-415",
number = "12",
volume = "56",
url = "conv_90"
}

Sekulić, Ž., Canić, N., Bartulović, Z., Milošević, V.,& Mihajlović, S.. (2002). Kvarcni pesak ležišta 'Avala' - Ub kao sirovina za staklarsku industriju. in Izgradnja
Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd., 56(12), 415-418.
conv_90

Sekulić Ž, Canić N, Bartulović Z, Milošević V, Mihajlović S. Kvarcni pesak ležišta 'Avala' - Ub kao sirovina za staklarsku industriju. in Izgradnja. 2002;56(12):415-418.
conv_90 .

Sekulić, Živko, Canić, Neda, Bartulović, Zoran, Milošević, Vladan, Mihajlović, Slavica, "Kvarcni pesak ležišta 'Avala' - Ub kao sirovina za staklarsku industriju" in Izgradnja, 56, no. 12 (2002):415-418,
conv_90 .