Application of different collectors in the flotation concentration of feldspar, mica and quartz sand
Abstract
The potential application of different cation collectors in the flotation concentration of mica, feldspar and quartz sand has been investigated. Raw materials (Bujanovac and Ub) from two localities in Serbia were used. The results showed that for flotation of feldspars, Aero 3030C performed better than Flotigam DAT. Aero 3030C was more selective, and with its application a higher mass recovery of feldspar was obtained. In particular, the mass recovery of feldspar was 19.58% when Aero 3030C was applied and 7.58% when Flotigam DAT was used. However, the chemical compositions of the feldspar concentrates were not significantly different no matter which of these reagents was used. For the flotation of impurities from quartz sand, Aero 3030C was better than a combination of R 825 and Armak C. When Aero 3030C was used, a higher quality of quartz sand concentrate was obtained than when a combination of these collectors was applied. The mass recovery of quartz sand was almost the same: 64.47% ...when Aero 3030C was used and 61.72% when a combination of Aero 825 and Armac C was used.
Keywords:
mineral processing / industrial minerals / flotation reagents / flotation collectorsSource:
Minerals Engineering, 2004, 17, 1, 77-80Publisher:
- Pergamon-Elsevier Science Ltd, Oxford
DOI: 10.1016/j.mineng.2003.10.004
ISSN: 0892-6875
WoS: 000188513700009
Scopus: 2-s2.0-0942267933
Collections
Institution/Community
Institut za tehnologiju nuklearnih i drugih mineralnih sirovinaTY - JOUR AU - Sekulić, Živko AU - Canić, Neda AU - Bartulović, Zoran AU - Daković, Aleksandra PY - 2004 UR - https://ritnms.itnms.ac.rs/handle/123456789/67 AB - The potential application of different cation collectors in the flotation concentration of mica, feldspar and quartz sand has been investigated. Raw materials (Bujanovac and Ub) from two localities in Serbia were used. The results showed that for flotation of feldspars, Aero 3030C performed better than Flotigam DAT. Aero 3030C was more selective, and with its application a higher mass recovery of feldspar was obtained. In particular, the mass recovery of feldspar was 19.58% when Aero 3030C was applied and 7.58% when Flotigam DAT was used. However, the chemical compositions of the feldspar concentrates were not significantly different no matter which of these reagents was used. For the flotation of impurities from quartz sand, Aero 3030C was better than a combination of R 825 and Armak C. When Aero 3030C was used, a higher quality of quartz sand concentrate was obtained than when a combination of these collectors was applied. The mass recovery of quartz sand was almost the same: 64.47% when Aero 3030C was used and 61.72% when a combination of Aero 825 and Armac C was used. PB - Pergamon-Elsevier Science Ltd, Oxford T2 - Minerals Engineering T1 - Application of different collectors in the flotation concentration of feldspar, mica and quartz sand EP - 80 IS - 1 SP - 77 VL - 17 DO - 10.1016/j.mineng.2003.10.004 UR - conv_471 ER -
@article{ author = "Sekulić, Živko and Canić, Neda and Bartulović, Zoran and Daković, Aleksandra", year = "2004", abstract = "The potential application of different cation collectors in the flotation concentration of mica, feldspar and quartz sand has been investigated. Raw materials (Bujanovac and Ub) from two localities in Serbia were used. The results showed that for flotation of feldspars, Aero 3030C performed better than Flotigam DAT. Aero 3030C was more selective, and with its application a higher mass recovery of feldspar was obtained. In particular, the mass recovery of feldspar was 19.58% when Aero 3030C was applied and 7.58% when Flotigam DAT was used. However, the chemical compositions of the feldspar concentrates were not significantly different no matter which of these reagents was used. For the flotation of impurities from quartz sand, Aero 3030C was better than a combination of R 825 and Armak C. When Aero 3030C was used, a higher quality of quartz sand concentrate was obtained than when a combination of these collectors was applied. The mass recovery of quartz sand was almost the same: 64.47% when Aero 3030C was used and 61.72% when a combination of Aero 825 and Armac C was used.", publisher = "Pergamon-Elsevier Science Ltd, Oxford", journal = "Minerals Engineering", title = "Application of different collectors in the flotation concentration of feldspar, mica and quartz sand", pages = "80-77", number = "1", volume = "17", doi = "10.1016/j.mineng.2003.10.004", url = "conv_471" }
Sekulić, Ž., Canić, N., Bartulović, Z.,& Daković, A.. (2004). Application of different collectors in the flotation concentration of feldspar, mica and quartz sand. in Minerals Engineering Pergamon-Elsevier Science Ltd, Oxford., 17(1), 77-80. https://doi.org/10.1016/j.mineng.2003.10.004 conv_471
Sekulić Ž, Canić N, Bartulović Z, Daković A. Application of different collectors in the flotation concentration of feldspar, mica and quartz sand. in Minerals Engineering. 2004;17(1):77-80. doi:10.1016/j.mineng.2003.10.004 conv_471 .
Sekulić, Živko, Canić, Neda, Bartulović, Zoran, Daković, Aleksandra, "Application of different collectors in the flotation concentration of feldspar, mica and quartz sand" in Minerals Engineering, 17, no. 1 (2004):77-80, https://doi.org/10.1016/j.mineng.2003.10.004 ., conv_471 .