Претраживање
Приказ резултата 1-10 од 37
Oxide Powder Mixture with Poly-vinyl Alcohol (PVA) and added Polyethylene Glycol (PEG) as Plasticizer
(Belgrade : Association for ETRAN Society, 2023)
Powder mixture consisted of ZnO, Mn2O3 (MnCO3) and Fe2O3 blended powders, was found laminating during compaction. Polyvinyl alcohol (PVA) and a combination of PVA with polyethylene glycol (PEG) added as a plasticizer, were ...
Fourier-Transform Infrared Spectroscopy Analysis of Mechanochemical Transformation Kinetics of Sodium Carbonate to Bicarbonate
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2022)
During mechanical activation, qualitative changes that can produce various phenomena occur in the material. In this study, anhydrous sodium carbonate was mechanically activated for 2, 7, 14, and 28 minutes in a vibro mill ...
Influence of Bi2O3 on sintering and crystallization of cordierite ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2005)
Uticaj Bi2O3 kao funkcionalnog dodatka na proces dobijanja kordijerita, 2MgO-2Al2O3-5SiO2 (MAS) proučavan je sinterovanjem sistema MgO/Bi2O3 (sinterovano na 820 i 1100°S), Al2O3/Bi2O3 i SiO2/Bi2O3 (sinterovano na 1100°S) ...
The Analysis of the Nucleation Process of the Lithium Germanium Phosphate Glass
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2022)
The nucleation process of lithium germanium-phosphate glass was studied to determine the temperature range of nucleation and the temperature of the maximum nucleation rate. The differential thermal analysis (DTA), and ...
Thermally induced phase transformation of Mn-LTA and Mn-FAU zeolite to anorthite phases
(Belgrade : Serbian Academy of science and art, 2021)
Data on thermally induced transformations of Mn exchanged zeolites LTA and FAU
topology are presented in this paper. Thermally induced phase transformation of Mn-
exchange zeolites are followed in the range from 700 to ...
Mechanical Activation as Sintering Pre-treatment of Talc for Steatite Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...
Cavitation Properties of Rendering Mortars with Micro Silica Addition
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2021)
Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A ...
Thermodynamic Aspect of Sodium Carbonate Mechanical Transformations under Different Environment
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
During mechanical activation, the energy of treated material is raised to a higher level that can lead to the chemical transformation of the activated material. This is the point that should be considered as a phenomenon ...
Application of pyrophyllite in high-temperature treated building materials
(Beograd : Međunarodni Institut za nauku o sinterovanju, 2023)
Phyllosilicate mineral pyrophyllite is predominantly used in the ceramic industry because it exhibits high refractoriness. Due to its thermal transformation into mullite, pyrophyllite is stable at elevated temperatures, ...
Kinetics of specific surface area change using the Boltzmann model
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2009)
Sinterovanjem sistema 2MgO·2Al2O3·5SiO2, dobija se kordijerit, koji zbog svojih svojstava predstavlja izuzetno atraktivan keramički materijal. U cilju ispitivanja mogućnosti sniženja temperature formiranja kordijerita tokom ...