Search
Now showing items 1-5 of 5
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
(Elsevier, Amsterdam, 2012)
Due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO center dot 2Al(2)O(3)center dot 5SiO(2), is a ...
Crystallization and sinterability of glass-ceramics in the system La2O3-SrO-B2O3
(Elsevier Sci Ltd, Oxford, 2014)
Glasses with a constant B2O3 and an increasing La2O3 content in the system La2O3-SrO-B2O3 were obtained by the usual melt quenching procedure. The crystallization and sinterability of the glasses were investigated by hot ...
Isothermal sintering of barium-zinc-titanate ceramics
(Elsevier Sci Ltd, Oxford, 2011)
Mixtures of BaCO3-ZnO-TiO2 were mechanically activated using high-energy planetary ball mill during 20, 40 and 80 min. As the time of mechanical activation increased, the decrease in particle size was observed. The effect ...
Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders: effect of the holding time
(Elsevier, Amsterdam, 2020)
Sintering, crystallization and foaming of nano glass powders with composition La2O3 center dot SrO center dot 5B(2)O(3) were studied by hot stage microscopy (HSM) and simultaneous thermal analysis (DTA-TG) under non-isothermal ...
Sintering, crystallization and foaming of La2O3 center dot SrO center dot 5B(2)O(3) glass powders - effect of the holding temperature and the heating rate
(Elsevier Science Bv, Amsterdam, 2018)
The peculiarities of sinter-crystallization of La2O3 center dot SrO center dot 5B(2)O(3) fine glass powder (below 1 mu m) are investigated and discussed. The sintering was studied by contactless optical dilatometry and ...