Претраживање
Приказ резултата 1-10 од 12
Predicting the modulus of elasticity of biocompatible titanium alloys using machine learning
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
Titanium alloys are widely employed in various fields, particularly in biomedical engineering, due to their mechanical and corrosion resistance properties combined with good biocompatibility. The modulus of elasticity is ...
Mg/Fe-pyro-hydro char derived from corn cob as effective adsorbent of lead removal from aqueous solutions
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
The corn cob was investigated as available agrowaste material for the production of potential efficient material for heavy
metals removal. The hydrothermal carbonization (HTC) technology is one of the appropriate methods ...
Directions and challenges of the circular economy: Movement of municipal solid waste in city of Paraćin
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
This paper aims to show a short economic analysis of the profitability of recycling management on the territory of Paraćin
municipality. Consumption habits of modern society and socioeconomic conditions have made it ...
Preparation and characterization of chitosan–clay composites as potential drug carriers
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
In this study, the preparation and characterization of chitosan–clay composites as potential carriers for tetracycline were performed. The composites based on bentonite (from the deposit of Beretnica, Republic of Serbia) ...
The adsorption of arsenic(v) ions from aqueous solutions by composite of natural polymer and metal oxide
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
The presence of arsenic in drinking water above the permissible limits is one of the current problems facing modern
engineers in the field of separations and it has not yet been satisfactorily resolved, because the ...
Sequencing batch reactor systems for the treatment of wastewater
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
Releasing untreated or inadequately treated effluents into recipients (rivers, lakes, and oceans) can endanger aquatic
ecosystems and drinking water sources. In order to eliminate harmful pollutants, wastewater must be ...
Bentonite clays as aflatoxin B1 adsorbents
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
In this study three bentonite clays (bentonite from deposit Beretnica in Republic of Serbia, commercial bentonite and gray
clay from Šipovo deposit in Bosnia and Herzegovina) were investigated as adsorbents of aflatoxin ...
Dissolution of polyphosphate glass: Impact of pH on diffusion coefficients of modifying cations at low temperatures
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
This paper shows the dissolution behavior of polyphosphate glass in demineralized water and 2% citric acid solution at temperatures: 15, 20, 30, 37 and 50 °C. The influence of the solvent type on the diffusion coefficients ...
Microstructure assessment of co alloy intended for dentistry
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
Cobalt–chromium–molybdenum (CoCrMo) alloys are known for medical use due to their biocompatibility, corrosion and
wear resistance. The chemical and phase composition, as well as microstructure of the alloy directly affect ...
Clay-chitosan-surfactant composites as efficient adsorbents of zearalenone
(Belgrade : Association of Metallurgical Engineers of Serbia, 2023)
In this study bentonite was modified with two chitosans, commercial or chitosan synthesized from mushroom. Obtained
products were subsequently treated with hexadecyltrimethyl ammonium bromide in the amount of 50% of the ...