TY  - CONF
AU  - Anđić, Dimitrije
AU  - Manojlović, Vaso
AU  - Gajić, Nataša
AU  - Sokić, Miroslav
AU  - Bugarčić, Mladen
AU  - Kamberović, Željko
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1300
AB  - The jarosite type of sediment that occurs in the hydrometallurgical production of zinc represents an attractive research area for the valorization of lead. Intermediate products of zinc metallurgy were used for testing: untreated, roasted and water-washed roasted PbAg precipitate. After a detailed insight into the possibility of processing this type of sediment using the hydrometallurgical process, the choice of means for leaching the samples was made, and in the experimental research a solution of magnesium chloride hexahydrate (MgCl2 × 6H2O) was used. The thermodynamic analysis included the calculation of the standard Gibbs energy of chemical leaching reactions and the construction of the Eh/pH diagram of the stability of lead and accompanying metals in the investigated systems. By examining the influence, ratio of sample mass and volume of leaching agent, as well as leaching time, conclusions were reached about the possibilities of leaching Pb from intermediate products of zinc metallurgy. The optimal parameters of the leaching process in the tested systems were determined, i. e. it was shown that in all three tested samples the maximum leaching of lead is achieved at a concentration of MgCl2 × 6H2O of 4 mol/dm3, for a duration of 60 minutes, at a temperature of 80 oC and a solid:liquid ratio of 1:20.
C3  - XVII Conference metallurgy of non-ferrous, rare and precious metals
T1  - Leaching of lead from intermediate products of zinc metallurgy
EP  - 916
SP  - 914
ER  - 

@conference{
author = "Anđić, Dimitrije and Manojlović, Vaso and Gajić, Nataša and Sokić, Miroslav and Bugarčić, Mladen and Kamberović, Željko",
year = "2024",
abstract = "The jarosite type of sediment that occurs in the hydrometallurgical production of zinc represents an attractive research area for the valorization of lead. Intermediate products of zinc metallurgy were used for testing: untreated, roasted and water-washed roasted PbAg precipitate. After a detailed insight into the possibility of processing this type of sediment using the hydrometallurgical process, the choice of means for leaching the samples was made, and in the experimental research a solution of magnesium chloride hexahydrate (MgCl2 × 6H2O) was used. The thermodynamic analysis included the calculation of the standard Gibbs energy of chemical leaching reactions and the construction of the Eh/pH diagram of the stability of lead and accompanying metals in the investigated systems. By examining the influence, ratio of sample mass and volume of leaching agent, as well as leaching time, conclusions were reached about the possibilities of leaching Pb from intermediate products of zinc metallurgy. The optimal parameters of the leaching process in the tested systems were determined, i. e. it was shown that in all three tested samples the maximum leaching of lead is achieved at a concentration of MgCl2 × 6H2O of 4 mol/dm3, for a duration of 60 minutes, at a temperature of 80 oC and a solid:liquid ratio of 1:20.",
journal = "XVII Conference metallurgy of non-ferrous, rare and precious metals",
title = "Leaching of lead from intermediate products of zinc metallurgy",
pages = "916-914"
}

Anđić, D., Manojlović, V., Gajić, N., Sokić, M., Bugarčić, M.,& Kamberović, Ž.. (2024). Leaching of lead from intermediate products of zinc metallurgy. in XVII Conference metallurgy of non-ferrous, rare and precious metals, 914-916.

Anđić D, Manojlović V, Gajić N, Sokić M, Bugarčić M, Kamberović Ž. Leaching of lead from intermediate products of zinc metallurgy. in XVII Conference metallurgy of non-ferrous, rare and precious metals. 2024;:914-916..

Anđić, Dimitrije, Manojlović, Vaso, Gajić, Nataša, Sokić, Miroslav, Bugarčić, Mladen, Kamberović, Željko, "Leaching of lead from intermediate products of zinc metallurgy" in XVII Conference metallurgy of non-ferrous, rare and precious metals (2024):914-916.

TY  - CONF
AU  - Vlahović, Milica
AU  - Žarković, Darja
AU  - Đorđević, Nataša
AU  - Mihajlović, Slavica
AU  - Vlahović, Miljan
AU  - Vušović, Nenad
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1296
AB  - The textile industry is one of the major polluters of the environment, primarily due to the types and quantities of wastewater it produces. It is estimated that 20% of global water pollution is caused by textile processing, meaning that these processes generate enormous amounts of wastewater. Generally, this wastewater contains high levels of suspended solids, dyes, salts, pesticides, non-biodegradable organic substances, and heavy metals. The decline in water quality, along with increasingly stringent environmental protection regulations, has led the textile industry to turn to sustainable wastewater treatment methods that help reduce the global water footprint. This paper reviews some viable methods used for the treatment of wastewater originating from the textile industry. The focus is on advanced treatment techniques, such as adsorption, membrane-based filtration, electrochemical processes, and advanced oxidation. These methods offer potential solutions to mitigate the environmental impact of textile wastewater and promote sustainable water management practices.
PB  - Belgrade : Union of engineers and textile technicians of Serbia
C3  - 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry - CT&ITI 2024
T1  - An overview on the viable methods for textile wastewater treatment
EP  - 521
SP  - 510
ER  - 

@conference{
author = "Vlahović, Milica and Žarković, Darja and Đorđević, Nataša and Mihajlović, Slavica and Vlahović, Miljan and Vušović, Nenad",
year = "2024",
abstract = "The textile industry is one of the major polluters of the environment, primarily due to the types and quantities of wastewater it produces. It is estimated that 20% of global water pollution is caused by textile processing, meaning that these processes generate enormous amounts of wastewater. Generally, this wastewater contains high levels of suspended solids, dyes, salts, pesticides, non-biodegradable organic substances, and heavy metals. The decline in water quality, along with increasingly stringent environmental protection regulations, has led the textile industry to turn to sustainable wastewater treatment methods that help reduce the global water footprint. This paper reviews some viable methods used for the treatment of wastewater originating from the textile industry. The focus is on advanced treatment techniques, such as adsorption, membrane-based filtration, electrochemical processes, and advanced oxidation. These methods offer potential solutions to mitigate the environmental impact of textile wastewater and promote sustainable water management practices.",
publisher = "Belgrade : Union of engineers and textile technicians of Serbia",
journal = "7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry - CT&ITI 2024",
title = "An overview on the viable methods for textile wastewater treatment",
pages = "521-510"
}

Vlahović, M., Žarković, D., Đorđević, N., Mihajlović, S., Vlahović, M.,& Vušović, N.. (2024). An overview on the viable methods for textile wastewater treatment. in 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry - CT&ITI 2024
Belgrade : Union of engineers and textile technicians of Serbia., 510-521.

Vlahović M, Žarković D, Đorđević N, Mihajlović S, Vlahović M, Vušović N. An overview on the viable methods for textile wastewater treatment. in 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry - CT&ITI 2024. 2024;:510-521..

Vlahović, Milica, Žarković, Darja, Đorđević, Nataša, Mihajlović, Slavica, Vlahović, Miljan, Vušović, Nenad, "An overview on the viable methods for textile wastewater treatment" in 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry - CT&ITI 2024 (2024):510-521.

TY  - JOUR
AU  - Savić, Veljko
AU  - Dojčinović, Marina
AU  - Topalović, Vladimir
AU  - Cvijović-Alagić, Ivana
AU  - Stojanović, Jovica
AU  - Matijašević, Srđan
AU  - Grujić, Snežana
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1233
AB  - The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass-ceramic from vitrified fly ash. Glass-ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter-crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T= 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass-ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C, and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass-ceramic samples was determined using the Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass-ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.
PB  - Springer Nature
T2  - International Journal of Environmental Science and Technology
T1  - The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash
EP  - 6074
IS  - 7
SP  - 6065
VL  - 21
DO  - 10.1007/s13762-023-05411-9
ER  - 

@article{
author = "Savić, Veljko and Dojčinović, Marina and Topalović, Vladimir and Cvijović-Alagić, Ivana and Stojanović, Jovica and Matijašević, Srđan and Grujić, Snežana",
year = "2024",
abstract = "The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass-ceramic from vitrified fly ash. Glass-ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter-crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T= 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass-ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C, and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass-ceramic samples was determined using the Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass-ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.",
publisher = "Springer Nature",
journal = "International Journal of Environmental Science and Technology",
title = "The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash",
pages = "6074-6065",
number = "7",
volume = "21",
doi = "10.1007/s13762-023-05411-9"
}

Savić, V., Dojčinović, M., Topalović, V., Cvijović-Alagić, I., Stojanović, J., Matijašević, S.,& Grujić, S.. (2024). The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash. in International Journal of Environmental Science and Technology
Springer Nature., 21(7), 6065-6074.
https://doi.org/10.1007/s13762-023-05411-9

Savić V, Dojčinović M, Topalović V, Cvijović-Alagić I, Stojanović J, Matijašević S, Grujić S. The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash. in International Journal of Environmental Science and Technology. 2024;21(7):6065-6074.
doi:10.1007/s13762-023-05411-9 .

Savić, Veljko, Dojčinović, Marina, Topalović, Vladimir, Cvijović-Alagić, Ivana, Stojanović, Jovica, Matijašević, Srđan, Grujić, Snežana, "The effect of sintering temperature on cavitation erosion in glass-ceramics based on coal fly ash" in International Journal of Environmental Science and Technology, 21, no. 7 (2024):6065-6074,
https://doi.org/10.1007/s13762-023-05411-9 . .

TY  - CONF
AU  - Grubišić, Mirko
AU  - Bošković-Rakočević, Ljiljana
AU  - Đorđević, Nataša
AU  - Mihajlović, Slavica
AU  - Matijašević, Srđan
AU  - Radosavljević-Mihajlović, Ana
AU  - Vukadinović, Melina
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1294
AB  - Zagađivanje čovekove sredine i mere za njihovo saniranje predstavlja jednu od najvećih briga današnjeg čovečanstva. Dosadašnje aktivnosti čoveka bila su usmerena ka naučnim i tehničkim dostignućima kako bi se unapredila industrijska proizvodnja na svim nivoima ne obazirući se uvek na segmente životne sredine. Posledice takvog ponašanja, danas se odražavaju na kvalitet tri osnovna faktora životne sredine a to su zemljište, voda i vazduh. Procesi oštećenja, uništenja posebno površinskih i podzemnih voda predstavljaju danas veliki problem mnogih zemalja u svetu, posebno ako se ima u vidu njihova direktna uloga u zdravlju i bezbednosti ljudi. Danas se u Srbiji godišnje u recipijente ispusti oko 400 miliona m3 otpadnih voda od toga preko 150 miliona m3 iz industrije a gde značajni deo preko 80 miliona m3 iz rudarstva. Rudarstvo kao značajna privredna grana u Srbiji u poslednjih nekoliko godina beleži značajno povećanje proizvodnih kapaciteta tako i generisanja kontaminiranih otpadnih voda posebno kada su u pitanju polimetalični rudnici. Otpadne vode iz rudarstva nastale kao nusprodukt procesnih aktivnosti najčešće u sadrže u sebi sadrže hemijske zagađivače a jednim manjim delom biološke zagađivače. Karakteristike rudarskih otpadnih voda značajno variraju u zavisnosti od ležišta tj. mineralne sirovine koja se eksploatiše kao i primenjene tehnologije i stepena prerade. Poslednjih nekoliko godina intenzivno se vrši proučavanje „in situ“ tehnologije polupropustljivih reaktivnih barijera (PRB) od prirodnih mineralnih sirovina na bazi zeolita i apatita kao punioca u tehnologiji prečišćavanja otpadnih voda. Polupropustljive reaktivne barijere sa odgovarajućim puniocima mogu uspešno da rešavaju širok spektar zagađivača kao što su metali, radionuklidi, hloridi i organski zagađivači,. Polupropustljive barijere predstavljaju brzo, ekonomično i efikasno rešenje za probleme kontaminacije površinskih i podzemnih voda u rudarstvu. U radu je ispitivana efikasnost prirodnih mineralnih sirovina na bazi zeolita i apatita kao reaktivnih materijala za „in situ“ prečišćavanje površinskih i podzemnih voda kontaminiranih Pb, Zn, Cd i U pri različitim pH vrednostima sredine.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - 15. Simpozijum sa međunarodnim učešćem-“Održivi razvoj u energetici i rudarstvu”
T1  - Efikasnost mineralnih sirovina u prečišćavanju rudarskih otpadnih voda koje su kontaminirane Pb, Cd, Zn, U
EP  - 28
SP  - 19
ER  - 

@conference{
author = "Grubišić, Mirko and Bošković-Rakočević, Ljiljana and Đorđević, Nataša and Mihajlović, Slavica and Matijašević, Srđan and Radosavljević-Mihajlović, Ana and Vukadinović, Melina",
year = "2024",
abstract = "Zagađivanje čovekove sredine i mere za njihovo saniranje predstavlja jednu od najvećih briga današnjeg čovečanstva. Dosadašnje aktivnosti čoveka bila su usmerena ka naučnim i tehničkim dostignućima kako bi se unapredila industrijska proizvodnja na svim nivoima ne obazirući se uvek na segmente životne sredine. Posledice takvog ponašanja, danas se odražavaju na kvalitet tri osnovna faktora životne sredine a to su zemljište, voda i vazduh. Procesi oštećenja, uništenja posebno površinskih i podzemnih voda predstavljaju danas veliki problem mnogih zemalja u svetu, posebno ako se ima u vidu njihova direktna uloga u zdravlju i bezbednosti ljudi. Danas se u Srbiji godišnje u recipijente ispusti oko 400 miliona m3 otpadnih voda od toga preko 150 miliona m3 iz industrije a gde značajni deo preko 80 miliona m3 iz rudarstva. Rudarstvo kao značajna privredna grana u Srbiji u poslednjih nekoliko godina beleži značajno povećanje proizvodnih kapaciteta tako i generisanja kontaminiranih otpadnih voda posebno kada su u pitanju polimetalični rudnici. Otpadne vode iz rudarstva nastale kao nusprodukt procesnih aktivnosti najčešće u sadrže u sebi sadrže hemijske zagađivače a jednim manjim delom biološke zagađivače. Karakteristike rudarskih otpadnih voda značajno variraju u zavisnosti od ležišta tj. mineralne sirovine koja se eksploatiše kao i primenjene tehnologije i stepena prerade. Poslednjih nekoliko godina intenzivno se vrši proučavanje „in situ“ tehnologije polupropustljivih reaktivnih barijera (PRB) od prirodnih mineralnih sirovina na bazi zeolita i apatita kao punioca u tehnologiji prečišćavanja otpadnih voda. Polupropustljive reaktivne barijere sa odgovarajućim puniocima mogu uspešno da rešavaju širok spektar zagađivača kao što su metali, radionuklidi, hloridi i organski zagađivači,. Polupropustljive barijere predstavljaju brzo, ekonomično i efikasno rešenje za probleme kontaminacije površinskih i podzemnih voda u rudarstvu. U radu je ispitivana efikasnost prirodnih mineralnih sirovina na bazi zeolita i apatita kao reaktivnih materijala za „in situ“ prečišćavanje površinskih i podzemnih voda kontaminiranih Pb, Zn, Cd i U pri različitim pH vrednostima sredine.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "15. Simpozijum sa međunarodnim učešćem-“Održivi razvoj u energetici i rudarstvu”",
title = "Efikasnost mineralnih sirovina u prečišćavanju rudarskih otpadnih voda koje su kontaminirane Pb, Cd, Zn, U",
pages = "28-19"
}

Grubišić, M., Bošković-Rakočević, L., Đorđević, N., Mihajlović, S., Matijašević, S., Radosavljević-Mihajlović, A.,& Vukadinović, M.. (2024). Efikasnost mineralnih sirovina u prečišćavanju rudarskih otpadnih voda koje su kontaminirane Pb, Cd, Zn, U. in 15. Simpozijum sa međunarodnim učešćem-“Održivi razvoj u energetici i rudarstvu”
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 19-28.

Grubišić M, Bošković-Rakočević L, Đorđević N, Mihajlović S, Matijašević S, Radosavljević-Mihajlović A, Vukadinović M. Efikasnost mineralnih sirovina u prečišćavanju rudarskih otpadnih voda koje su kontaminirane Pb, Cd, Zn, U. in 15. Simpozijum sa međunarodnim učešćem-“Održivi razvoj u energetici i rudarstvu”. 2024;:19-28..

Grubišić, Mirko, Bošković-Rakočević, Ljiljana, Đorđević, Nataša, Mihajlović, Slavica, Matijašević, Srđan, Radosavljević-Mihajlović, Ana, Vukadinović, Melina, "Efikasnost mineralnih sirovina u prečišćavanju rudarskih otpadnih voda koje su kontaminirane Pb, Cd, Zn, U" in 15. Simpozijum sa međunarodnim učešćem-“Održivi razvoj u energetici i rudarstvu” (2024):19-28.

TY  - CONF
AU  - Bugarčić, Mladen
AU  - Jovanović, Aleksandar
AU  - Dimitrijević, Jelena
AU  - Mišić, Milica
AU  - Sokić, Miroslav
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1250
AB  - Управљање загађујућим материјама добијеним из примарних сировина представља
изазов за очување животне средине. Надовезујући се на принципе циркуларне
економије, индустријске симбиозе и одрживог управљања ресурсима, дат је преглед
иновативних стратегија за затварање петље токова загађујућих материја и
промовисање отпорнијег и еколошки прихватљивијег индустријског екосистема. У
овом раду биће наведене различите методе за имобилизацију загађујућих материја
екстрахованих као споредних производа из минералних сировина и њихову
реинтеграцију у стабилне минерале. Концептом дизајнирања производа и процеса
имајући на уму могућност рециклирања и дуговечност уз примену чистијих
производних техника и коришћењем еколошки прихватљивих материјала. Поред
тога, напредак у рециклажним технологијама нуди обећавајуће методе за
екстракцију загађивача из отпадних токова и њихову поновну уградњу у минералне
матрице, ефикасно их имобилизирајући и спречавајући даље ширење у животну
средину. Кроз колаборативне мреже размене између индустрија, токови отпадних
сировина могу се пренаменити као инпути за друге процесе, затварајући петљу у
коришћењу ресурса и ублажавајући загађење. Превођењем загађујућих материја
назад у минерале кроз синергетска партнерства, индустријска симбиоза нуди пут
ка одрживом управљању ресурсима и ублажавању загађења. Кампање подизања
свести јавности и едукација потрошача такође играју кључну улогу у неговању
културе одрживости, оснажујући појединце да доносе информисане изборе и
подржавају предузећа која су посвећена управљању животном средином. У закључку,
овај рад наглашава хитну потребу за иновативним решењима за имобилизацију
загађивача екстрахованих из минералних сировина и њихову реинтеграцију назад у
одговарајуће минералне матрице. Комбинацијом чистијих производних техника,
технологија рециклаже, индустријске симбиозе и легислативне подршке, можемо
ефикасно затворити петљу на токове загађивача, минимизирати штету по
животну средину и промовисати одрживији индустријски екосистем. Како тежимо
ка циркуларној економији, имобилизација загађивача представља критичан корак у
постизању заједничког циља управљања животном средином и дугорочне
одрживости.
C3  - Rudarstvo 2024
T1  - Tokovi zagađujućih materija iz primarnih sirovina i mogućnost zatvaranja toka u ciklus
EP  - 52
SP  - 43
ER  - 

@conference{
author = "Bugarčić, Mladen and Jovanović, Aleksandar and Dimitrijević, Jelena and Mišić, Milica and Sokić, Miroslav",
year = "2024",
abstract = "Управљање загађујућим материјама добијеним из примарних сировина представља
изазов за очување животне средине. Надовезујући се на принципе циркуларне
економије, индустријске симбиозе и одрживог управљања ресурсима, дат је преглед
иновативних стратегија за затварање петље токова загађујућих материја и
промовисање отпорнијег и еколошки прихватљивијег индустријског екосистема. У
овом раду биће наведене различите методе за имобилизацију загађујућих материја
екстрахованих као споредних производа из минералних сировина и њихову
реинтеграцију у стабилне минерале. Концептом дизајнирања производа и процеса
имајући на уму могућност рециклирања и дуговечност уз примену чистијих
производних техника и коришћењем еколошки прихватљивих материјала. Поред
тога, напредак у рециклажним технологијама нуди обећавајуће методе за
екстракцију загађивача из отпадних токова и њихову поновну уградњу у минералне
матрице, ефикасно их имобилизирајући и спречавајући даље ширење у животну
средину. Кроз колаборативне мреже размене између индустрија, токови отпадних
сировина могу се пренаменити као инпути за друге процесе, затварајући петљу у
коришћењу ресурса и ублажавајући загађење. Превођењем загађујућих материја
назад у минерале кроз синергетска партнерства, индустријска симбиоза нуди пут
ка одрживом управљању ресурсима и ублажавању загађења. Кампање подизања
свести јавности и едукација потрошача такође играју кључну улогу у неговању
културе одрживости, оснажујући појединце да доносе информисане изборе и
подржавају предузећа која су посвећена управљању животном средином. У закључку,
овај рад наглашава хитну потребу за иновативним решењима за имобилизацију
загађивача екстрахованих из минералних сировина и њихову реинтеграцију назад у
одговарајуће минералне матрице. Комбинацијом чистијих производних техника,
технологија рециклаже, индустријске симбиозе и легислативне подршке, можемо
ефикасно затворити петљу на токове загађивача, минимизирати штету по
животну средину и промовисати одрживији индустријски екосистем. Како тежимо
ка циркуларној економији, имобилизација загађивача представља критичан корак у
постизању заједничког циља управљања животном средином и дугорочне
одрживости.",
journal = "Rudarstvo 2024",
title = "Tokovi zagađujućih materija iz primarnih sirovina i mogućnost zatvaranja toka u ciklus",
pages = "52-43"
}

Bugarčić, M., Jovanović, A., Dimitrijević, J., Mišić, M.,& Sokić, M.. (2024). Tokovi zagađujućih materija iz primarnih sirovina i mogućnost zatvaranja toka u ciklus. in Rudarstvo 2024, 43-52.

Bugarčić M, Jovanović A, Dimitrijević J, Mišić M, Sokić M. Tokovi zagađujućih materija iz primarnih sirovina i mogućnost zatvaranja toka u ciklus. in Rudarstvo 2024. 2024;:43-52..

Bugarčić, Mladen, Jovanović, Aleksandar, Dimitrijević, Jelena, Mišić, Milica, Sokić, Miroslav, "Tokovi zagađujućih materija iz primarnih sirovina i mogućnost zatvaranja toka u ciklus" in Rudarstvo 2024 (2024):43-52.

Koprivica, M., Petrović, J., Ercegović, M., Simić, M., Milojković, J., Dimitrijević, J.,& Milojkov, D.. (2024). Primena biočađi lista drveta Paulovnije kao oplemenjivača zemljišta za uzgoj zdravog travnjaka – PauLChar. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Koprivica M, Petrović J, Ercegović M, Simić M, Milojković J, Dimitrijević J, Milojkov D. Primena biočađi lista drveta Paulovnije kao oplemenjivača zemljišta za uzgoj zdravog travnjaka – PauLChar. 2024;..

Koprivica, Marija, Petrović, Jelena, Ercegović, Marija, Simić, Marija, Milojković, Jelena, Dimitrijević, Jelena, Milojkov, Dušan, "Primena biočađi lista drveta Paulovnije kao oplemenjivača zemljišta za uzgoj zdravog travnjaka – PauLChar" (2024).

TY  - CONF
AU  - Dimitrijević, Jelena
AU  - Jevtić, Sanja
AU  - Koprivica, Marija
AU  - Marinković, Aleksandar
AU  - Simić, Marija
AU  - Petrović, Jelena
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1239
AB  - U ovom istraživanju, ispitivana je sposobnost otpadne biomase kao adsorbenta, pri čemu je ovsena slama (OS) odabrana kao polazna sirovina. Da bi se unapredio kapacitet adsorpcije ovog materijala, on je modifikovan sa odabranim dubokim eutektičkim rastvaračem (DES). Radi proširenja mogućnosti primene nakon tretmana sa DES-om, modifikovana ovsena slama (DOS) je imobilisana u kuglice sa alginatom, te je time dobijen IDOS. Efikasnost adsorpcije teških metalnih jona metala iz rastvora bakra testirana je na modifikovanoj (ili imobilisanoj) ovsenoj slami. Maksimalni dobijeni kapaciteti za adsorpciju jona bakra bili su 26.4, 81.4, 124.78 mg/g respektivno. Dobijeni rezultati pokazali su da adsorpcija prati kinetički model pseudo-drugog reda, što implicira da je hemisorpcija za vezivanje jona bakra, odnosno korak koji kontroliše brzinu adsorpcije.
PB  - Novi Sad : Prirodno-matematički fakultet
C3  - "11. Memorijalni naučni skup iz zaštite životne sredine „Docent dr Milena Dalmacija“ "
T1  - Imobilisana otpadna ovsena slama kao efikasan adsorbent jona bakra
ER  - 

@conference{
author = "Dimitrijević, Jelena and Jevtić, Sanja and Koprivica, Marija and Marinković, Aleksandar and Simić, Marija and Petrović, Jelena",
year = "2024",
abstract = "U ovom istraživanju, ispitivana je sposobnost otpadne biomase kao adsorbenta, pri čemu je ovsena slama (OS) odabrana kao polazna sirovina. Da bi se unapredio kapacitet adsorpcije ovog materijala, on je modifikovan sa odabranim dubokim eutektičkim rastvaračem (DES). Radi proširenja mogućnosti primene nakon tretmana sa DES-om, modifikovana ovsena slama (DOS) je imobilisana u kuglice sa alginatom, te je time dobijen IDOS. Efikasnost adsorpcije teških metalnih jona metala iz rastvora bakra testirana je na modifikovanoj (ili imobilisanoj) ovsenoj slami. Maksimalni dobijeni kapaciteti za adsorpciju jona bakra bili su 26.4, 81.4, 124.78 mg/g respektivno. Dobijeni rezultati pokazali su da adsorpcija prati kinetički model pseudo-drugog reda, što implicira da je hemisorpcija za vezivanje jona bakra, odnosno korak koji kontroliše brzinu adsorpcije.",
publisher = "Novi Sad : Prirodno-matematički fakultet",
journal = ""11. Memorijalni naučni skup iz zaštite životne sredine „Docent dr Milena Dalmacija“ "",
title = "Imobilisana otpadna ovsena slama kao efikasan adsorbent jona bakra"
}

Dimitrijević, J., Jevtić, S., Koprivica, M., Marinković, A., Simić, M.,& Petrović, J.. (2024). Imobilisana otpadna ovsena slama kao efikasan adsorbent jona bakra. in "11. Memorijalni naučni skup iz zaštite životne sredine „Docent dr Milena Dalmacija“ "
Novi Sad : Prirodno-matematički fakultet..

Dimitrijević J, Jevtić S, Koprivica M, Marinković A, Simić M, Petrović J. Imobilisana otpadna ovsena slama kao efikasan adsorbent jona bakra. in "11. Memorijalni naučni skup iz zaštite životne sredine „Docent dr Milena Dalmacija“ ". 2024;..

Dimitrijević, Jelena, Jevtić, Sanja, Koprivica, Marija, Marinković, Aleksandar, Simić, Marija, Petrović, Jelena, "Imobilisana otpadna ovsena slama kao efikasan adsorbent jona bakra" in "11. Memorijalni naučni skup iz zaštite životne sredine „Docent dr Milena Dalmacija“ " (2024).

TY  - CONF
AU  - Koprivica, Marija
AU  - Dimitrijević, Jelena
AU  - Petrović, Jelena
AU  - Ercegović, Marija
AU  - Simić, Marija
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1272
AB  - The alkaline activation could be useful to improve the adsorption abilities of hydrochars. In this
regard, the aim of this work was a comparison of the efficiency of non-modified (HPL) and modified
hydrochar (MHPL) forms during the adsorption of cadmium (Cd) ions from aqueous media. It was
found that MHPL had a higher capacity (qm=19.60 mg/g) and a different mechanism of bonding than
HPL (qm=11.76 mg/g). The Langmuir isotherms model best described Cd(II) adsorption by HPL, while
the Freundlich isotherm model better-described adsorption by alkali modified form. The SEM/EDS
and the FTIR analysis confirmed that there is a structural difference between these two new
adsorption materials, which might be attributed to the influence of the NaOH treatment. Also, the
FTIR analysis showed that MHPL adsorbent most binds Cd ions using oxygen functional groups. It
can be concluded that this paper also confirmed that alkaline modification improves the adsorption
capacity of hydrochar.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 31st International conference ecological truth and environmental research – EcoTER’24
T1  - Comparison between hydrochar and its alkali modified form in the removal of Cd(II) ions from aqueous solution
EP  - 322
SP  - 317
ER  - 

@conference{
author = "Koprivica, Marija and Dimitrijević, Jelena and Petrović, Jelena and Ercegović, Marija and Simić, Marija",
year = "2024",
abstract = "The alkaline activation could be useful to improve the adsorption abilities of hydrochars. In this
regard, the aim of this work was a comparison of the efficiency of non-modified (HPL) and modified
hydrochar (MHPL) forms during the adsorption of cadmium (Cd) ions from aqueous media. It was
found that MHPL had a higher capacity (qm=19.60 mg/g) and a different mechanism of bonding than
HPL (qm=11.76 mg/g). The Langmuir isotherms model best described Cd(II) adsorption by HPL, while
the Freundlich isotherm model better-described adsorption by alkali modified form. The SEM/EDS
and the FTIR analysis confirmed that there is a structural difference between these two new
adsorption materials, which might be attributed to the influence of the NaOH treatment. Also, the
FTIR analysis showed that MHPL adsorbent most binds Cd ions using oxygen functional groups. It
can be concluded that this paper also confirmed that alkaline modification improves the adsorption
capacity of hydrochar.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "31st International conference ecological truth and environmental research – EcoTER’24",
title = "Comparison between hydrochar and its alkali modified form in the removal of Cd(II) ions from aqueous solution",
pages = "322-317"
}

Koprivica, M., Dimitrijević, J., Petrović, J., Ercegović, M.,& Simić, M.. (2024). Comparison between hydrochar and its alkali modified form in the removal of Cd(II) ions from aqueous solution. in 31st International conference ecological truth and environmental research – EcoTER’24
Bor : University of Belgrade, Technical Faculty in Bor., 317-322.

Koprivica M, Dimitrijević J, Petrović J, Ercegović M, Simić M. Comparison between hydrochar and its alkali modified form in the removal of Cd(II) ions from aqueous solution. in 31st International conference ecological truth and environmental research – EcoTER’24. 2024;:317-322..

Koprivica, Marija, Dimitrijević, Jelena, Petrović, Jelena, Ercegović, Marija, Simić, Marija, "Comparison between hydrochar and its alkali modified form in the removal of Cd(II) ions from aqueous solution" in 31st International conference ecological truth and environmental research – EcoTER’24 (2024):317-322.

TY  - CONF
AU  - Petrović, Jelena
AU  - Ercegović, Marija
AU  - Simić, Marija
AU  - Koprivica, Marija
AU  - Dimitrijević, Jelena
PY  - 2024
UR  - https://conference.arsdcollege.ac.in/rafm2024/publication.html
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1238
AB  - Untreated industrial effluent is causing alarming levels of water pollution in our modern world. Hydrochars, functional carbonaceous materials obtained during the hydrothermal carbonization of waste biomass, possess a great potential for use in industrial wastewater treatment. Their high reactivity and regenerative properties compensate its deficiency, which is reflected in a small specific surface area. In addition, these materials are amenable to additional functionalization and modification by various chemical treatments. Previous studies have demonstrated that incorporating metals onto the surface of hydrochar or treating it with hydrogen peroxide or alkalis can significantly enhance its adsorption capabilities. This paper provides a brief overview of using hydrochars from various sources as adsorbents for heavy metals. This review aims to assess the impact of material modification on its structural characteristics and sorption capacity.
PB  - New Delhi : Atma Ram Sanatan Dharma College (University of Delhi)
C3  - Recent Advances in Functional Materials (RAFM-2024)
T1  - Hydrochars as novel functionalized materials for heavy metals removal
EP  - 37
SP  - 37
ER  - 

@conference{
author = "Petrović, Jelena and Ercegović, Marija and Simić, Marija and Koprivica, Marija and Dimitrijević, Jelena",
year = "2024",
abstract = "Untreated industrial effluent is causing alarming levels of water pollution in our modern world. Hydrochars, functional carbonaceous materials obtained during the hydrothermal carbonization of waste biomass, possess a great potential for use in industrial wastewater treatment. Their high reactivity and regenerative properties compensate its deficiency, which is reflected in a small specific surface area. In addition, these materials are amenable to additional functionalization and modification by various chemical treatments. Previous studies have demonstrated that incorporating metals onto the surface of hydrochar or treating it with hydrogen peroxide or alkalis can significantly enhance its adsorption capabilities. This paper provides a brief overview of using hydrochars from various sources as adsorbents for heavy metals. This review aims to assess the impact of material modification on its structural characteristics and sorption capacity.",
publisher = "New Delhi : Atma Ram Sanatan Dharma College (University of Delhi)",
journal = "Recent Advances in Functional Materials (RAFM-2024)",
title = "Hydrochars as novel functionalized materials for heavy metals removal",
pages = "37-37"
}

Petrović, J., Ercegović, M., Simić, M., Koprivica, M.,& Dimitrijević, J.. (2024). Hydrochars as novel functionalized materials for heavy metals removal. in Recent Advances in Functional Materials (RAFM-2024)
New Delhi : Atma Ram Sanatan Dharma College (University of Delhi)., 37-37.

Petrović J, Ercegović M, Simić M, Koprivica M, Dimitrijević J. Hydrochars as novel functionalized materials for heavy metals removal. in Recent Advances in Functional Materials (RAFM-2024). 2024;:37-37..

Petrović, Jelena, Ercegović, Marija, Simić, Marija, Koprivica, Marija, Dimitrijević, Jelena, "Hydrochars as novel functionalized materials for heavy metals removal" in Recent Advances in Functional Materials (RAFM-2024) (2024):37-37.

TY  - JOUR
AU  - Petrović, Jelena
AU  - Ercegović, Marija
AU  - Simić, Marija
AU  - Koprivica, Marija
AU  - Dimitrijević, Jelena
AU  - Jovanović, Aleksandar
AU  - Janković Pantić, Jovana
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1220
AB  - The concept of a bio-based economy has been adopted by many advanced countries around
the world, and thermochemical conversion of waste biomass is recognized as the most effective
approach to achieve this objective. Recent studies indicate that hydrothermal carbonization (HTC)
is a promising method for the conversion of waste biomass towards novel carbonaceous materials
known as hydrochars. This cost-effective and eco-friendly process operates at moderate temperatures
(180–280 ◦C) and uses water as a reaction medium. HTC has been successfully applied to a wide
range of waste materials, including lignocellulose biomass, sewage sludge, algae, and municipal solid
waste, generating desirable carbonaceous products. This review provides an overview of the key
HTC process parameters, as well as the physical and chemical properties of the obtained hydrochar.
It also explores potential applications of produced materials and highlights the modification and
functionalization techniques that can transform these materials into game-changing solutions for a
sustainable future.
PB  - MDPI
T2  - Processes
T1  - Hydrothermal Carbonization of Waste Biomass: A Review of Hydrochar Preparation and Environmental Application
IS  - 1
SP  - 207
VL  - 12
DO  - 10.3390/pr12010207
ER  - 

@article{
author = "Petrović, Jelena and Ercegović, Marija and Simić, Marija and Koprivica, Marija and Dimitrijević, Jelena and Jovanović, Aleksandar and Janković Pantić, Jovana",
year = "2024",
abstract = "The concept of a bio-based economy has been adopted by many advanced countries around
the world, and thermochemical conversion of waste biomass is recognized as the most effective
approach to achieve this objective. Recent studies indicate that hydrothermal carbonization (HTC)
is a promising method for the conversion of waste biomass towards novel carbonaceous materials
known as hydrochars. This cost-effective and eco-friendly process operates at moderate temperatures
(180–280 ◦C) and uses water as a reaction medium. HTC has been successfully applied to a wide
range of waste materials, including lignocellulose biomass, sewage sludge, algae, and municipal solid
waste, generating desirable carbonaceous products. This review provides an overview of the key
HTC process parameters, as well as the physical and chemical properties of the obtained hydrochar.
It also explores potential applications of produced materials and highlights the modification and
functionalization techniques that can transform these materials into game-changing solutions for a
sustainable future.",
publisher = "MDPI",
journal = "Processes",
title = "Hydrothermal Carbonization of Waste Biomass: A Review of Hydrochar Preparation and Environmental Application",
number = "1",
pages = "207",
volume = "12",
doi = "10.3390/pr12010207"
}

Petrović, J., Ercegović, M., Simić, M., Koprivica, M., Dimitrijević, J., Jovanović, A.,& Janković Pantić, J.. (2024). Hydrothermal Carbonization of Waste Biomass: A Review of Hydrochar Preparation and Environmental Application. in Processes
MDPI., 12(1), 207.
https://doi.org/10.3390/pr12010207

Petrović J, Ercegović M, Simić M, Koprivica M, Dimitrijević J, Jovanović A, Janković Pantić J. Hydrothermal Carbonization of Waste Biomass: A Review of Hydrochar Preparation and Environmental Application. in Processes. 2024;12(1):207.
doi:10.3390/pr12010207 .

Petrović, Jelena, Ercegović, Marija, Simić, Marija, Koprivica, Marija, Dimitrijević, Jelena, Jovanović, Aleksandar, Janković Pantić, Jovana, "Hydrothermal Carbonization of Waste Biomass: A Review of Hydrochar Preparation and Environmental Application" in Processes, 12, no. 1 (2024):207,
https://doi.org/10.3390/pr12010207 . .

TY  - JOUR
AU  - Ercegović, Marija
AU  - Petrović, Jelena
AU  - Koprivica, Marija
AU  - Simić, Marija
AU  - Grubišić, Mirko
AU  - Vuković, Nikola
AU  - Krstić, Jugoslav
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1282
AB  - Three-dimensional hierarchical porous carbons (HPCs) created through hydrothermal carbonization and the subsequent chemical activation of miscanthus were tested as adsorbents of Pb2+ and methylene blue from the aqueous solution. The HPC pore structure was customized using various hydrochar precursors obtained through a longer reaction time and by adding acetic acid. HPC obtained from hydrochar derived from acetic acid’s addition exhibited the highest specific surface area due to a larger micropore volume. This adsorbent proved to be the most efficient in removing lead from aqueous solutions. The Langmuir isotherm best described the lead adsorption process onto HPC with qm = 155.6 mg g−1 and the pseudo-second-order kinetic model. HPC obtained from hydrochar produced with a longer reaction time exhibited improved methylene blue adsorption properties. The pseudo-second-order kinetic model and the Freundlich isotherm best described the experimental data. The theoretical maximum adsorption capacity for methylene blue was 316.0 mg g−1. The type of hydrochar significantly impacted the yield and physical structure of HPCs, while having a lesser effect on the composition of surface functional groups. The results revealed the binding mechanism of each pollutant, highlighting the importance of biomass pretreatment on the structure of the resulting HPC and its effectiveness in water purification.
PB  - MDPI
T2  - Water
T1  - Efficient adsorption of pollutants from aqueous solutions by hydrochar-based hierarchical porous carbons
IS  - 15
SP  - 2177
VL  - 16
DO  - 10.3390/w16152177
ER  - 

@article{
author = "Ercegović, Marija and Petrović, Jelena and Koprivica, Marija and Simić, Marija and Grubišić, Mirko and Vuković, Nikola and Krstić, Jugoslav",
year = "2024",
abstract = "Three-dimensional hierarchical porous carbons (HPCs) created through hydrothermal carbonization and the subsequent chemical activation of miscanthus were tested as adsorbents of Pb2+ and methylene blue from the aqueous solution. The HPC pore structure was customized using various hydrochar precursors obtained through a longer reaction time and by adding acetic acid. HPC obtained from hydrochar derived from acetic acid’s addition exhibited the highest specific surface area due to a larger micropore volume. This adsorbent proved to be the most efficient in removing lead from aqueous solutions. The Langmuir isotherm best described the lead adsorption process onto HPC with qm = 155.6 mg g−1 and the pseudo-second-order kinetic model. HPC obtained from hydrochar produced with a longer reaction time exhibited improved methylene blue adsorption properties. The pseudo-second-order kinetic model and the Freundlich isotherm best described the experimental data. The theoretical maximum adsorption capacity for methylene blue was 316.0 mg g−1. The type of hydrochar significantly impacted the yield and physical structure of HPCs, while having a lesser effect on the composition of surface functional groups. The results revealed the binding mechanism of each pollutant, highlighting the importance of biomass pretreatment on the structure of the resulting HPC and its effectiveness in water purification.",
publisher = "MDPI",
journal = "Water",
title = "Efficient adsorption of pollutants from aqueous solutions by hydrochar-based hierarchical porous carbons",
number = "15",
pages = "2177",
volume = "16",
doi = "10.3390/w16152177"
}

Ercegović, M., Petrović, J., Koprivica, M., Simić, M., Grubišić, M., Vuković, N.,& Krstić, J.. (2024). Efficient adsorption of pollutants from aqueous solutions by hydrochar-based hierarchical porous carbons. in Water
MDPI., 16(15), 2177.
https://doi.org/10.3390/w16152177

Ercegović M, Petrović J, Koprivica M, Simić M, Grubišić M, Vuković N, Krstić J. Efficient adsorption of pollutants from aqueous solutions by hydrochar-based hierarchical porous carbons. in Water. 2024;16(15):2177.
doi:10.3390/w16152177 .

Ercegović, Marija, Petrović, Jelena, Koprivica, Marija, Simić, Marija, Grubišić, Mirko, Vuković, Nikola, Krstić, Jugoslav, "Efficient adsorption of pollutants from aqueous solutions by hydrochar-based hierarchical porous carbons" in Water, 16, no. 15 (2024):2177,
https://doi.org/10.3390/w16152177 . .

TY  - JOUR
AU  - Mikavica, Ivana
AU  - Ranđelović, Dragana
AU  - Ilić, Miloš
AU  - Obradović, Milena
AU  - Stojanović, Jovica
AU  - Mutić, Jelena
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1288
AB  - Omnipresent in terrestrial ecosystems, microplastics (MPs) represent a hazard to soil biota and human health, while their relationship with other environmental contaminants remains poorly acknowledged. This study investigated MPs prevalence in (sub)urban soils of Serbia and its impact on Cd, As, and Pb mobility in the soil-medicinal plant Capsella bursa-pastoris (L.) Medik system. Soil physicochemical parameters (pH, Eh, SOM, and texture) were analyzed alongside the Cd, As, and Pb pseudo-total (aqua regia) and phytoavailable (EDTA) contents. Toxic elements' concentrations in soil fractions and C. bursa-pastoris roots and shoots were determined by inductively coupled plasma optical emission spectroscopy (ICP-OES). Pseudo-total Cd, As, and Pb contents in soils ranged from 0.16 to 2.23 μg g−1, 2.00–36.92 μg g−1, and 0.18–65.54 μg g−1, respectively. Using an optimized density separation method with 30% H2O2 and 5% NaClO, we found an average abundance of 489 MPs per kg of soil. ATR-FTIR spectroscopy confirmed the presence of seven polymer types, whereby the main contributors were polystyrene (PS) – 28.57% and cardanol prepolymer (PCP) – 23.81%. The dominant associated pollution sources were road networks and industrial activities. Spearman correlation analysis revealed the interconnection among soil MPs, physicochemical variables, and Cd, As, and Pb mobility. We identified significant positive correlations between MPs' abundance and phytoavailable concentrations of Cd, As, and Pb (ρ = 0.82, 0.95, and 0.63). Moreover, soil MPs strongly positively correlated with Cd contents in roots (ρ = 0.61) and shoots of C. bursa-pastoris (ρ = 0.65). These findings underscore the synergistic effects of MPs and toxic metals in urban environmental pollution, with possible implications for human health. Further research is required to deepen our understanding of the impact of MPs on element mobility in complex plant-soil systems and to elucidate the broader consequences of induced alterations.
PB  - Elsevier
T2  - Chemosphere
T1  - Distribution of microplastics in (sub)urban soils of Serbia and Cd, As, and Pb uptake by Capsella bursa-pastoris (L.) Medik
SP  - 142891
VL  - 363
DO  - 10.1016/j.chemosphere.2024.142891
ER  - 

@article{
author = "Mikavica, Ivana and Ranđelović, Dragana and Ilić, Miloš and Obradović, Milena and Stojanović, Jovica and Mutić, Jelena",
year = "2024",
abstract = "Omnipresent in terrestrial ecosystems, microplastics (MPs) represent a hazard to soil biota and human health, while their relationship with other environmental contaminants remains poorly acknowledged. This study investigated MPs prevalence in (sub)urban soils of Serbia and its impact on Cd, As, and Pb mobility in the soil-medicinal plant Capsella bursa-pastoris (L.) Medik system. Soil physicochemical parameters (pH, Eh, SOM, and texture) were analyzed alongside the Cd, As, and Pb pseudo-total (aqua regia) and phytoavailable (EDTA) contents. Toxic elements' concentrations in soil fractions and C. bursa-pastoris roots and shoots were determined by inductively coupled plasma optical emission spectroscopy (ICP-OES). Pseudo-total Cd, As, and Pb contents in soils ranged from 0.16 to 2.23 μg g−1, 2.00–36.92 μg g−1, and 0.18–65.54 μg g−1, respectively. Using an optimized density separation method with 30% H2O2 and 5% NaClO, we found an average abundance of 489 MPs per kg of soil. ATR-FTIR spectroscopy confirmed the presence of seven polymer types, whereby the main contributors were polystyrene (PS) – 28.57% and cardanol prepolymer (PCP) – 23.81%. The dominant associated pollution sources were road networks and industrial activities. Spearman correlation analysis revealed the interconnection among soil MPs, physicochemical variables, and Cd, As, and Pb mobility. We identified significant positive correlations between MPs' abundance and phytoavailable concentrations of Cd, As, and Pb (ρ = 0.82, 0.95, and 0.63). Moreover, soil MPs strongly positively correlated with Cd contents in roots (ρ = 0.61) and shoots of C. bursa-pastoris (ρ = 0.65). These findings underscore the synergistic effects of MPs and toxic metals in urban environmental pollution, with possible implications for human health. Further research is required to deepen our understanding of the impact of MPs on element mobility in complex plant-soil systems and to elucidate the broader consequences of induced alterations.",
publisher = "Elsevier",
journal = "Chemosphere",
title = "Distribution of microplastics in (sub)urban soils of Serbia and Cd, As, and Pb uptake by Capsella bursa-pastoris (L.) Medik",
pages = "142891",
volume = "363",
doi = "10.1016/j.chemosphere.2024.142891"
}

Mikavica, I., Ranđelović, D., Ilić, M., Obradović, M., Stojanović, J.,& Mutić, J.. (2024). Distribution of microplastics in (sub)urban soils of Serbia and Cd, As, and Pb uptake by Capsella bursa-pastoris (L.) Medik. in Chemosphere
Elsevier., 363, 142891.
https://doi.org/10.1016/j.chemosphere.2024.142891

Mikavica I, Ranđelović D, Ilić M, Obradović M, Stojanović J, Mutić J. Distribution of microplastics in (sub)urban soils of Serbia and Cd, As, and Pb uptake by Capsella bursa-pastoris (L.) Medik. in Chemosphere. 2024;363:142891.
doi:10.1016/j.chemosphere.2024.142891 .

Mikavica, Ivana, Ranđelović, Dragana, Ilić, Miloš, Obradović, Milena, Stojanović, Jovica, Mutić, Jelena, "Distribution of microplastics in (sub)urban soils of Serbia and Cd, As, and Pb uptake by Capsella bursa-pastoris (L.) Medik" in Chemosphere, 363 (2024):142891,
https://doi.org/10.1016/j.chemosphere.2024.142891 . .

TY  - CONF
AU  - Mikavica, Ivana
AU  - Ranđelović, Dragana
AU  - Ilić, Miloš
AU  - Mutić, Jelena
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1289
AB  - Owing to mild properties, wide availability, and low reported side effects, medicinal herbs have
been traditionally utilized for thousands of years as a folk remedy, while almost 80% of the world
population consumes it as a medical supplement of primary healthcare (WHO). Despite widespread
distribution and a broad spectrum of benefits for human health, Capsella bursa-pastoris L. Medik is
an underexplored medicinal species with a recorded significant accumulation capacity for
potentially toxic elements (PTEs). In the present study, we investigated the abundance and mobility
of PTEs (Ba, Co, Cr, Cu, Fe, Mn, Ni, Sr, and Zn) in the urban soil - C. bursa-pastoris system and
comprehensively evaluated potential posing human health risks. Samples were collected in four
Serbian cities – Belgrade, Bor, Vršac, and Sremska Mitrovica. PTEs concentrations in samples were
determined using inductively coupled plasma optical emission spectroscopy (ICP-OES). The
pseudo-total concentrations in soils surpassed the world mean levels. Cu, Zn, Sr, and Mn were the
most abundant, whereby the calculated Igeo index suggested moderate to heavy soil contamination.
Non-carcinogenic (HI) and carcinogenic risks (CR) associated with the ingestion, dermal, and
inhalation exposure to the examined soils were within the acceptable ranges (HI < 1, CR < 10-6).
Although Sr, Cu, and Ni contents were elevated in the plant tissues (roots - up to 57.04 mg kg-1, 23.36 mg kg-1, and 7.90 mg kg-1, and shoots – up to 60.78 mg kg-1, 20.21 mg kg-1 and 6.26 mg kg1), estimated daily intake (EDI), target hazard quotient (THQ), and lifetime carcinogenic risk (LCR)
demonstrated non-significant health risks by consuming C. bursa-pastoris, as a raw herb or herbal
extracts. This study aimed to underscore the urgency of the PTEs' continual monitoring in soils and
medicinal plants and highlight the importance of conducting comprehensive health risk assessments
in providing safe medicinal plant utilization.
PB  - Belgrade : University of Belgrade, Faculty of Agriculture
C3  - 3rd International UNIfood Conference
T1  - Human health risk assessment of PTEs in Capsella bursa-pastoris and its extracts
EP  - 142
SP  - 142
ER  - 

@conference{
author = "Mikavica, Ivana and Ranđelović, Dragana and Ilić, Miloš and Mutić, Jelena",
year = "2024",
abstract = "Owing to mild properties, wide availability, and low reported side effects, medicinal herbs have
been traditionally utilized for thousands of years as a folk remedy, while almost 80% of the world
population consumes it as a medical supplement of primary healthcare (WHO). Despite widespread
distribution and a broad spectrum of benefits for human health, Capsella bursa-pastoris L. Medik is
an underexplored medicinal species with a recorded significant accumulation capacity for
potentially toxic elements (PTEs). In the present study, we investigated the abundance and mobility
of PTEs (Ba, Co, Cr, Cu, Fe, Mn, Ni, Sr, and Zn) in the urban soil - C. bursa-pastoris system and
comprehensively evaluated potential posing human health risks. Samples were collected in four
Serbian cities – Belgrade, Bor, Vršac, and Sremska Mitrovica. PTEs concentrations in samples were
determined using inductively coupled plasma optical emission spectroscopy (ICP-OES). The
pseudo-total concentrations in soils surpassed the world mean levels. Cu, Zn, Sr, and Mn were the
most abundant, whereby the calculated Igeo index suggested moderate to heavy soil contamination.
Non-carcinogenic (HI) and carcinogenic risks (CR) associated with the ingestion, dermal, and
inhalation exposure to the examined soils were within the acceptable ranges (HI < 1, CR < 10-6).
Although Sr, Cu, and Ni contents were elevated in the plant tissues (roots - up to 57.04 mg kg-1, 23.36 mg kg-1, and 7.90 mg kg-1, and shoots – up to 60.78 mg kg-1, 20.21 mg kg-1 and 6.26 mg kg1), estimated daily intake (EDI), target hazard quotient (THQ), and lifetime carcinogenic risk (LCR)
demonstrated non-significant health risks by consuming C. bursa-pastoris, as a raw herb or herbal
extracts. This study aimed to underscore the urgency of the PTEs' continual monitoring in soils and
medicinal plants and highlight the importance of conducting comprehensive health risk assessments
in providing safe medicinal plant utilization.",
publisher = "Belgrade : University of Belgrade, Faculty of Agriculture",
journal = "3rd International UNIfood Conference",
title = "Human health risk assessment of PTEs in Capsella bursa-pastoris and its extracts",
pages = "142-142"
}

Mikavica, I., Ranđelović, D., Ilić, M.,& Mutić, J.. (2024). Human health risk assessment of PTEs in Capsella bursa-pastoris and its extracts. in 3rd International UNIfood Conference
Belgrade : University of Belgrade, Faculty of Agriculture., 142-142.

Mikavica I, Ranđelović D, Ilić M, Mutić J. Human health risk assessment of PTEs in Capsella bursa-pastoris and its extracts. in 3rd International UNIfood Conference. 2024;:142-142..

Mikavica, Ivana, Ranđelović, Dragana, Ilić, Miloš, Mutić, Jelena, "Human health risk assessment of PTEs in Capsella bursa-pastoris and its extracts" in 3rd International UNIfood Conference (2024):142-142.

TY  - CONF
AU  - Nikolić, Nebojša D.
AU  - Lović, Jelena D.
AU  - Vuković, Nikola
AU  - Stevanović, Sanja I.
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1285
AB  - Zinc-air batteries belong to the group of green and sustainable energy storage systems, and as such, they attract a huge attention of both academic and technological communities. For this system, the alkaline electrolytes of zinc with high concentrations of ZnO and KOH are used. Morphology of zinc electrodeposits is characterized by the scanning electron microscopy (SEM) technique, and it was found that it depended on an overpotential of the electrodeposition with a strong contribution of a length of the electrodeposition time on the final shape. Variety of morphological shapes was observed: irregular and regular grains including those hexagonal shape were predominately formed at the overpotential belonging to the plateau of the limiting diffusion current density. The compact both regular and irregular dendrites were formed at this overpotential with the longer electrodeposition time. The 2D (two-dimensional) and 3D (three-dimensional) dendrites were formed at overpotentials outside the plateau of the limiting diffusion current density, in the zone of the rapid growth of the current density with the increase of the overpotential. In this zone, hydrogen evolution reaction as the second reaction to Zn electrolysis at high overpotentials started to take place. It is manifested by the appearance of craters on the surface of the electrode, which originate from detached hydrogen bubbles. All morpholical forms were explained and discussed applying the basic laws of electrocrystallization.
PB  - Belgrade : Serbian Society of Corrosion and Materials Protection (UISKOZAM)
C3  - XXV YuCorr International Conference – Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection
T1  - Designing of the shape of zinc particles by variation of electrolysis conditions
ER  - 

@conference{
author = "Nikolić, Nebojša D. and Lović, Jelena D. and Vuković, Nikola and Stevanović, Sanja I.",
year = "2024",
abstract = "Zinc-air batteries belong to the group of green and sustainable energy storage systems, and as such, they attract a huge attention of both academic and technological communities. For this system, the alkaline electrolytes of zinc with high concentrations of ZnO and KOH are used. Morphology of zinc electrodeposits is characterized by the scanning electron microscopy (SEM) technique, and it was found that it depended on an overpotential of the electrodeposition with a strong contribution of a length of the electrodeposition time on the final shape. Variety of morphological shapes was observed: irregular and regular grains including those hexagonal shape were predominately formed at the overpotential belonging to the plateau of the limiting diffusion current density. The compact both regular and irregular dendrites were formed at this overpotential with the longer electrodeposition time. The 2D (two-dimensional) and 3D (three-dimensional) dendrites were formed at overpotentials outside the plateau of the limiting diffusion current density, in the zone of the rapid growth of the current density with the increase of the overpotential. In this zone, hydrogen evolution reaction as the second reaction to Zn electrolysis at high overpotentials started to take place. It is manifested by the appearance of craters on the surface of the electrode, which originate from detached hydrogen bubbles. All morpholical forms were explained and discussed applying the basic laws of electrocrystallization.",
publisher = "Belgrade : Serbian Society of Corrosion and Materials Protection (UISKOZAM)",
journal = "XXV YuCorr International Conference – Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection",
title = "Designing of the shape of zinc particles by variation of electrolysis conditions"
}

Nikolić, N. D., Lović, J. D., Vuković, N.,& Stevanović, S. I.. (2024). Designing of the shape of zinc particles by variation of electrolysis conditions. in XXV YuCorr International Conference – Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection
Belgrade : Serbian Society of Corrosion and Materials Protection (UISKOZAM)..

Nikolić ND, Lović JD, Vuković N, Stevanović SI. Designing of the shape of zinc particles by variation of electrolysis conditions. in XXV YuCorr International Conference – Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection. 2024;..

Nikolić, Nebojša D., Lović, Jelena D., Vuković, Nikola, Stevanović, Sanja I., "Designing of the shape of zinc particles by variation of electrolysis conditions" in XXV YuCorr International Conference – Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection (2024).

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Lamovec, Jelena S.
AU  - Vasiljević‑Radović, Dana
AU  - Vuković, Nikola
AU  - Radojević, Vesna
AU  - Nikolić, Nebojša D.
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1283
AB  - Correlation between morphology of electrolytically produced copper thin films and their hardness has been considered. The Cu films were electrodeposited by galvanostatic (DC) and by the pulsating current (PC) regimes on cathodes of limiting values of hardness (Cu, brass, and Si(111)) from the basic sulfate electrolytes without and with addition of leveling/brightening additives, without and with various ways of electrolyte stirring (ultrasound and magnetic stirring), and characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. Hardness of Cu films was determined by microindentation and by application of composite hardness models (CHMs), such as Cheng–Gao (C–G) and Korsunsky (K), with the aim to eliminate a contribution of cathode hardness in the measured film hardness and to determine the absolute hardness of the Cu films. The fine-grained films obtained from the basic sulfate electrolyte were harder than the smooth film obtained from the electrolyte with additives and that obtained by the PC regime, indicating that the PC produced film represents transitional form between these two types of the films. The obtained values of the absolute film hardness in the 1.135–1.647 GPa range were in line with already published values for the electrolytically produced Cu thin films, clearly indicating on successful implementation of CHMs in determination of the absolute hardness of thin films. Correlation between morphology and hardness of Cu films was discussed by the basic laws of electrocrystallization and phenomena on boundary among grains during microindentation processes.
PB  - Springer-Verlag GmbH Germany
T2  - Journal of Solid State Electrochemistry
T1  - Correlation between morphology and hardness of electrolytically produced copper thin films
DO  - 10.1007/s10008-024-05948-w
ER  - 

@article{
author = "Mladenović, Ivana O. and Lamovec, Jelena S. and Vasiljević‑Radović, Dana and Vuković, Nikola and Radojević, Vesna and Nikolić, Nebojša D.",
year = "2024",
abstract = "Correlation between morphology of electrolytically produced copper thin films and their hardness has been considered. The Cu films were electrodeposited by galvanostatic (DC) and by the pulsating current (PC) regimes on cathodes of limiting values of hardness (Cu, brass, and Si(111)) from the basic sulfate electrolytes without and with addition of leveling/brightening additives, without and with various ways of electrolyte stirring (ultrasound and magnetic stirring), and characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. Hardness of Cu films was determined by microindentation and by application of composite hardness models (CHMs), such as Cheng–Gao (C–G) and Korsunsky (K), with the aim to eliminate a contribution of cathode hardness in the measured film hardness and to determine the absolute hardness of the Cu films. The fine-grained films obtained from the basic sulfate electrolyte were harder than the smooth film obtained from the electrolyte with additives and that obtained by the PC regime, indicating that the PC produced film represents transitional form between these two types of the films. The obtained values of the absolute film hardness in the 1.135–1.647 GPa range were in line with already published values for the electrolytically produced Cu thin films, clearly indicating on successful implementation of CHMs in determination of the absolute hardness of thin films. Correlation between morphology and hardness of Cu films was discussed by the basic laws of electrocrystallization and phenomena on boundary among grains during microindentation processes.",
publisher = "Springer-Verlag GmbH Germany",
journal = "Journal of Solid State Electrochemistry",
title = "Correlation between morphology and hardness of electrolytically produced copper thin films",
doi = "10.1007/s10008-024-05948-w"
}

Mladenović, I. O., Lamovec, J. S., Vasiljević‑Radović, D., Vuković, N., Radojević, V.,& Nikolić, N. D.. (2024). Correlation between morphology and hardness of electrolytically produced copper thin films. in Journal of Solid State Electrochemistry
Springer-Verlag GmbH Germany..
https://doi.org/10.1007/s10008-024-05948-w

Mladenović IO, Lamovec JS, Vasiljević‑Radović D, Vuković N, Radojević V, Nikolić ND. Correlation between morphology and hardness of electrolytically produced copper thin films. in Journal of Solid State Electrochemistry. 2024;.
doi:10.1007/s10008-024-05948-w .

Mladenović, Ivana O., Lamovec, Jelena S., Vasiljević‑Radović, Dana, Vuković, Nikola, Radojević, Vesna, Nikolić, Nebojša D., "Correlation between morphology and hardness of electrolytically produced copper thin films" in Journal of Solid State Electrochemistry (2024),
https://doi.org/10.1007/s10008-024-05948-w . .

TY  - CONF
AU  - Nikolić, Nebojša D.
AU  - Lović, Jelena D.
AU  - Maksimović, Vesna M.
AU  - Vuković, Nikola
AU  - Stevanović, Sanja I.
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1284
AB  - The alkaline electrolytes of zinc are widely used in a Zn-air secondary batteries which represent promising candidate for energy storage with many advantages relative to the other types, such as Li-air, Al-air, and Mg-air batteries. These advantages are related with an abundance of Zn, low toxicity, and low cost, as well as by the fact that Zn possess a relatively high specific energy density. One of the largest problems in a development of Zn-air batteries is dendritic growth caused by the uneven deposition of zinc in the charging process. The solving of this problem implies the good knowledge of all phenomena related with Zn deposition, and regarding it, this study aims to establish a correlation between morphology and structure of electrolytically produced Zn irregular forms, especially Zn dendrites. Zinc was electrodeposited potentiostatically from the concentrated electrolyte (0.35 M ZnO in 6.0 M KOH) at overpotentials belonging to the end of the plateau of the limiting diffusion current density (η = 160 mV), and to the zone of the fast growth of the current density after the end of the plateau of the limiting diffusion current density (η = 220 and 280 mV). Morphology and structure of Zn particles were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD), respectively.
Morphology of Zn electrodeposits changed with the increase of overpotential of the electrodeposition from regular hexagonal and other regular crystal forms to the mixture of 2D (two dimensional) and 3D (three dimensional) dendrites. The increase of overpotential of the electrodeposition led to an appearing and then intensification of hydrogen evolution reaction as a parallel reaction during Zn electrodeposition at the high overpotentials.
In spite of various shapes, Zn particles electrodeposited at all three overpotentials exhibited the strong (002) preferred orientation. The explanation for this predominant preferred orientation can be found in an analogy with a electrolytic growth of lead dendrites from the concentrated electrolyte. Although these two metals belong to different types of crystal lattice (Pb - face-cantered cubic type, and Zn - hexagonal close packed type), the common characteristic of dendritic growth is the preferred orientation in a crystal plane with the lowest surface energy. Namely, during growth of dendrites, this plane survives, while other crystal planes with the higher surface energy values disappear, causing the predominant orientation of Zn disperse forms in (002) crystal plane. In this way, interior of the Zn dendrites is constructed from (002) crystal plane, while tips and edges of Zn dendrites and other types of particles are from other crystal planes.
PB  - Belgrade : Serbian Chemical Society
C3  - 9th Regional Symposium on Electrochemistry - South-East Europe (RSE-SEE)
T1  - Morphology and structure of electrolytically produced zinc dendrites from the alkaline electrolyte
EP  - 97
SP  - 97
ER  - 

@conference{
author = "Nikolić, Nebojša D. and Lović, Jelena D. and Maksimović, Vesna M. and Vuković, Nikola and Stevanović, Sanja I.",
year = "2024",
abstract = "The alkaline electrolytes of zinc are widely used in a Zn-air secondary batteries which represent promising candidate for energy storage with many advantages relative to the other types, such as Li-air, Al-air, and Mg-air batteries. These advantages are related with an abundance of Zn, low toxicity, and low cost, as well as by the fact that Zn possess a relatively high specific energy density. One of the largest problems in a development of Zn-air batteries is dendritic growth caused by the uneven deposition of zinc in the charging process. The solving of this problem implies the good knowledge of all phenomena related with Zn deposition, and regarding it, this study aims to establish a correlation between morphology and structure of electrolytically produced Zn irregular forms, especially Zn dendrites. Zinc was electrodeposited potentiostatically from the concentrated electrolyte (0.35 M ZnO in 6.0 M KOH) at overpotentials belonging to the end of the plateau of the limiting diffusion current density (η = 160 mV), and to the zone of the fast growth of the current density after the end of the plateau of the limiting diffusion current density (η = 220 and 280 mV). Morphology and structure of Zn particles were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD), respectively.
Morphology of Zn electrodeposits changed with the increase of overpotential of the electrodeposition from regular hexagonal and other regular crystal forms to the mixture of 2D (two dimensional) and 3D (three dimensional) dendrites. The increase of overpotential of the electrodeposition led to an appearing and then intensification of hydrogen evolution reaction as a parallel reaction during Zn electrodeposition at the high overpotentials.
In spite of various shapes, Zn particles electrodeposited at all three overpotentials exhibited the strong (002) preferred orientation. The explanation for this predominant preferred orientation can be found in an analogy with a electrolytic growth of lead dendrites from the concentrated electrolyte. Although these two metals belong to different types of crystal lattice (Pb - face-cantered cubic type, and Zn - hexagonal close packed type), the common characteristic of dendritic growth is the preferred orientation in a crystal plane with the lowest surface energy. Namely, during growth of dendrites, this plane survives, while other crystal planes with the higher surface energy values disappear, causing the predominant orientation of Zn disperse forms in (002) crystal plane. In this way, interior of the Zn dendrites is constructed from (002) crystal plane, while tips and edges of Zn dendrites and other types of particles are from other crystal planes.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "9th Regional Symposium on Electrochemistry - South-East Europe (RSE-SEE)",
title = "Morphology and structure of electrolytically produced zinc dendrites from the alkaline electrolyte",
pages = "97-97"
}

Nikolić, N. D., Lović, J. D., Maksimović, V. M., Vuković, N.,& Stevanović, S. I.. (2024). Morphology and structure of electrolytically produced zinc dendrites from the alkaline electrolyte. in 9th Regional Symposium on Electrochemistry - South-East Europe (RSE-SEE)
Belgrade : Serbian Chemical Society., 97-97.

Nikolić ND, Lović JD, Maksimović VM, Vuković N, Stevanović SI. Morphology and structure of electrolytically produced zinc dendrites from the alkaline electrolyte. in 9th Regional Symposium on Electrochemistry - South-East Europe (RSE-SEE). 2024;:97-97..

Nikolić, Nebojša D., Lović, Jelena D., Maksimović, Vesna M., Vuković, Nikola, Stevanović, Sanja I., "Morphology and structure of electrolytically produced zinc dendrites from the alkaline electrolyte" in 9th Regional Symposium on Electrochemistry - South-East Europe (RSE-SEE) (2024):97-97.

TY  - JOUR
AU  - El Messaoudi, Noureddine
AU  - Ciğeroğlu, Zeynep
AU  - Mine Şenol, Zeynep
AU  - Kazan-Kaya, Emine Sena
AU  - Fernine, Yassmine
AU  - Gubernat, Sylwia
AU  - Lopičić, Zorica
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1280
AB  - In this review, copper ferrite (CuFe2O4) nanoparticles (NPs) have attracted interest due to their unique properties and potential applications in biomedicine, environmental remediation, energy storage, and catalysis. The fabrication of CuFe2O4 NPs using green synthesis method has gained attention as an eco-friendly alternative to conventional synthesis methods. We have provided a critical evaluation and comparison of the applications of CuFe2O4 NPs fabricated by the green synthesis method using bioresource extracts of such as plant, bacteria, fungi, virus, and algae. We highlight the advantages of using green synthesis methods, including reduced toxicity, lower energy consumption, and decreased environmental impact. We also discuss the challenges associated with the synthesis of CuFe2O4 NPs using bioresource extracts and provide future perspectives for the use of green synthesis methods in this area. This review aims to provide insights into the applications of CuFe2O4 NPs fabricated by the green synthesis method and to guide future research in this area.
PB  - Springer
T2  - Biomass Conversion and Biorefinery
T1  - Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review
DO  - 10.1007/s13399-023-05264-9
ER  - 

@article{
author = "El Messaoudi, Noureddine and Ciğeroğlu, Zeynep and Mine Şenol, Zeynep and Kazan-Kaya, Emine Sena and Fernine, Yassmine and Gubernat, Sylwia and Lopičić, Zorica",
year = "2024",
abstract = "In this review, copper ferrite (CuFe2O4) nanoparticles (NPs) have attracted interest due to their unique properties and potential applications in biomedicine, environmental remediation, energy storage, and catalysis. The fabrication of CuFe2O4 NPs using green synthesis method has gained attention as an eco-friendly alternative to conventional synthesis methods. We have provided a critical evaluation and comparison of the applications of CuFe2O4 NPs fabricated by the green synthesis method using bioresource extracts of such as plant, bacteria, fungi, virus, and algae. We highlight the advantages of using green synthesis methods, including reduced toxicity, lower energy consumption, and decreased environmental impact. We also discuss the challenges associated with the synthesis of CuFe2O4 NPs using bioresource extracts and provide future perspectives for the use of green synthesis methods in this area. This review aims to provide insights into the applications of CuFe2O4 NPs fabricated by the green synthesis method and to guide future research in this area.",
publisher = "Springer",
journal = "Biomass Conversion and Biorefinery",
title = "Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review",
doi = "10.1007/s13399-023-05264-9"
}

El Messaoudi, N., Ciğeroğlu, Z., Mine Şenol, Z., Kazan-Kaya, E. S., Fernine, Y., Gubernat, S.,& Lopičić, Z.. (2024). Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review. in Biomass Conversion and Biorefinery
Springer..
https://doi.org/10.1007/s13399-023-05264-9

El Messaoudi N, Ciğeroğlu Z, Mine Şenol Z, Kazan-Kaya ES, Fernine Y, Gubernat S, Lopičić Z. Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review. in Biomass Conversion and Biorefinery. 2024;.
doi:10.1007/s13399-023-05264-9 .

El Messaoudi, Noureddine, Ciğeroğlu, Zeynep, Mine Şenol, Zeynep, Kazan-Kaya, Emine Sena, Fernine, Yassmine, Gubernat, Sylwia, Lopičić, Zorica, "Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review" in Biomass Conversion and Biorefinery (2024),
https://doi.org/10.1007/s13399-023-05264-9 . .

TY  - JOUR
AU  - Stojanović, Jevrem
AU  - Milojević-Rakić, Maja
AU  - Bajuk-Bogdanović, Danica
AU  - Ranđelović, Dragana
AU  - Sokić, Miroslav
AU  - Otašević, Biljana
AU  - Malenović, Anđelija
AU  - Janošević Ležajić, Aleksandra
AU  - Protić, Ana
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1277
AB  - A chemometrically based approach was applied to select the most efficient drug adsorbent among the biochars obtained from the novel feedstock, the leaves of the invasive plant (Ailanthus altissima). The representative target adsorbates (atenolol, paracetamol, ketorolac and tetracycline) were selected on the basis of their physicochemical properties to cover a wide chemical space, which is the usual analytical challenge. Their adsorption was investigated using design of experiments as a comprehensive approach to optimise the performance of the adsorption system, rationalise the procedure and overcome common drawbacks. Among the response surface designs, the central composite design was selected as it allows the identification of important experimental factors (solid-to-liquid ratio, pH, ionic strength) and their interactions, and allows the selection of optimal experimental conditions to maximise adsorption performance. The biochars were prepared by pyrolysis at 500 °C and 800 °C (BC-500 and BC-800) and the ZnCl2-activated biochars were prepared at 650 °C and 800 °C (AcBC-650 and AcBC-800). The FTIR spectra revealed that increasing the pyrolysis temperature without activator decreases the intensity of all bands, while activation preserves functional groups, as evidenced by the spectra of AcBC-650 and AcBC-800. High temperatures during activation promoted the development of an efficient surface area, with the maximum observed for AcBC-800 reaching 347 m2 g−1. AcBC-800 was found to be the most efficient adsorbent with removal efficiencies of 34.1, 51.3, 55.9 and 38.2 % for atenolol, paracetamol, ketorolac and tetracycline, respectively. The models describing the relationship between the removal efficiency of AcBC-800 and the experimental factors studied, showed satisfactory predictive ability (predicted R2 > 0.8) and no significant lack-of-fit was observed. The results obtained, including the mathematical models, the properties of the adsorbates and the adsorbents, clearly indicate that the adsorption mechanisms of activated biochars are mainly based on hydrophobic interactions, pore filling and hydrogen bonding.
PB  - Elsevier
T2  - Heliyon
T1  - Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves
IS  - 14
SP  - e34841
VL  - 10
DO  - 10.1016/j.heliyon.2024.e34841
ER  - 

@article{
author = "Stojanović, Jevrem and Milojević-Rakić, Maja and Bajuk-Bogdanović, Danica and Ranđelović, Dragana and Sokić, Miroslav and Otašević, Biljana and Malenović, Anđelija and Janošević Ležajić, Aleksandra and Protić, Ana",
year = "2024",
abstract = "A chemometrically based approach was applied to select the most efficient drug adsorbent among the biochars obtained from the novel feedstock, the leaves of the invasive plant (Ailanthus altissima). The representative target adsorbates (atenolol, paracetamol, ketorolac and tetracycline) were selected on the basis of their physicochemical properties to cover a wide chemical space, which is the usual analytical challenge. Their adsorption was investigated using design of experiments as a comprehensive approach to optimise the performance of the adsorption system, rationalise the procedure and overcome common drawbacks. Among the response surface designs, the central composite design was selected as it allows the identification of important experimental factors (solid-to-liquid ratio, pH, ionic strength) and their interactions, and allows the selection of optimal experimental conditions to maximise adsorption performance. The biochars were prepared by pyrolysis at 500 °C and 800 °C (BC-500 and BC-800) and the ZnCl2-activated biochars were prepared at 650 °C and 800 °C (AcBC-650 and AcBC-800). The FTIR spectra revealed that increasing the pyrolysis temperature without activator decreases the intensity of all bands, while activation preserves functional groups, as evidenced by the spectra of AcBC-650 and AcBC-800. High temperatures during activation promoted the development of an efficient surface area, with the maximum observed for AcBC-800 reaching 347 m2 g−1. AcBC-800 was found to be the most efficient adsorbent with removal efficiencies of 34.1, 51.3, 55.9 and 38.2 % for atenolol, paracetamol, ketorolac and tetracycline, respectively. The models describing the relationship between the removal efficiency of AcBC-800 and the experimental factors studied, showed satisfactory predictive ability (predicted R2 > 0.8) and no significant lack-of-fit was observed. The results obtained, including the mathematical models, the properties of the adsorbates and the adsorbents, clearly indicate that the adsorption mechanisms of activated biochars are mainly based on hydrophobic interactions, pore filling and hydrogen bonding.",
publisher = "Elsevier",
journal = "Heliyon",
title = "Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves",
number = "14",
pages = "e34841",
volume = "10",
doi = "10.1016/j.heliyon.2024.e34841"
}

Stojanović, J., Milojević-Rakić, M., Bajuk-Bogdanović, D., Ranđelović, D., Sokić, M., Otašević, B., Malenović, A., Janošević Ležajić, A.,& Protić, A.. (2024). Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves. in Heliyon
Elsevier., 10(14), e34841.
https://doi.org/10.1016/j.heliyon.2024.e34841

Stojanović J, Milojević-Rakić M, Bajuk-Bogdanović D, Ranđelović D, Sokić M, Otašević B, Malenović A, Janošević Ležajić A, Protić A. Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves. in Heliyon. 2024;10(14):e34841.
doi:10.1016/j.heliyon.2024.e34841 .

Stojanović, Jevrem, Milojević-Rakić, Maja, Bajuk-Bogdanović, Danica, Ranđelović, Dragana, Sokić, Miroslav, Otašević, Biljana, Malenović, Anđelija, Janošević Ležajić, Aleksandra, Protić, Ana, "Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves" in Heliyon, 10, no. 14 (2024):e34841,
https://doi.org/10.1016/j.heliyon.2024.e34841 . .

TY  - JOUR
AU  - Stojanović, Dejan
AU  - Ranđelović, Dragana
AU  - Ivetić, Jelena
AU  - Pap, Predrag
AU  - Zlatković, Milica
AU  - Đilas, Milutin
AU  - Orlović, Saša
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1278
AB  - Spongy moth (Lymantria dispar Linnaeus 1758) populations have the potential to reach outbreak levels, causing disruptions to forest ecosystems across Eurasia and North America. Continuous monitoring of the size and health of the spongy moth population in the egg stage is important for managing population outbreaks. Current methods include counting eggs within egg masses using manual methods. This study introduces an innovative solution aimed at optimizing the prediction of biotic disturbances and preventing the potential risks associated with spongy moth population outbreaks. The challenges and constraints related to the process of hair removal from spongy moth eggs have been effectively addressed through the development of a device powered by a torque-generating unit. This study aims to (1) introduce a novel device designed for the removal of hairs from spongy moth (L. dispar) eggs; (2) introduce a new hair removal procedure; and (3) empirically demonstrate the benefits of the introduced innovations. The introduced device and the procedure enable a significantly expedited diagnosis of the potential for a population outbreak in the current year, with the potential for widespread utilization. This invention enhances our understanding of predicting biotic disorders and facilitates the rapid assessment of the risk of their occurrence.
PB  - MDPI
T2  - Forests
T1  - Improving the Monitoring and Control of Egg Vitality of Lymantria dispar Linnaeus 1758 Using an Innovative Device and Procedure for Removing Egg Hairs
IS  - 8
SP  - 1426
VL  - 15
DO  - 10.3390/f15081426
ER  - 

@article{
author = "Stojanović, Dejan and Ranđelović, Dragana and Ivetić, Jelena and Pap, Predrag and Zlatković, Milica and Đilas, Milutin and Orlović, Saša",
year = "2024",
abstract = "Spongy moth (Lymantria dispar Linnaeus 1758) populations have the potential to reach outbreak levels, causing disruptions to forest ecosystems across Eurasia and North America. Continuous monitoring of the size and health of the spongy moth population in the egg stage is important for managing population outbreaks. Current methods include counting eggs within egg masses using manual methods. This study introduces an innovative solution aimed at optimizing the prediction of biotic disturbances and preventing the potential risks associated with spongy moth population outbreaks. The challenges and constraints related to the process of hair removal from spongy moth eggs have been effectively addressed through the development of a device powered by a torque-generating unit. This study aims to (1) introduce a novel device designed for the removal of hairs from spongy moth (L. dispar) eggs; (2) introduce a new hair removal procedure; and (3) empirically demonstrate the benefits of the introduced innovations. The introduced device and the procedure enable a significantly expedited diagnosis of the potential for a population outbreak in the current year, with the potential for widespread utilization. This invention enhances our understanding of predicting biotic disorders and facilitates the rapid assessment of the risk of their occurrence.",
publisher = "MDPI",
journal = "Forests",
title = "Improving the Monitoring and Control of Egg Vitality of Lymantria dispar Linnaeus 1758 Using an Innovative Device and Procedure for Removing Egg Hairs",
number = "8",
pages = "1426",
volume = "15",
doi = "10.3390/f15081426"
}

Stojanović, D., Ranđelović, D., Ivetić, J., Pap, P., Zlatković, M., Đilas, M.,& Orlović, S.. (2024). Improving the Monitoring and Control of Egg Vitality of Lymantria dispar Linnaeus 1758 Using an Innovative Device and Procedure for Removing Egg Hairs. in Forests
MDPI., 15(8), 1426.
https://doi.org/10.3390/f15081426

Stojanović D, Ranđelović D, Ivetić J, Pap P, Zlatković M, Đilas M, Orlović S. Improving the Monitoring and Control of Egg Vitality of Lymantria dispar Linnaeus 1758 Using an Innovative Device and Procedure for Removing Egg Hairs. in Forests. 2024;15(8):1426.
doi:10.3390/f15081426 .

Stojanović, Dejan, Ranđelović, Dragana, Ivetić, Jelena, Pap, Predrag, Zlatković, Milica, Đilas, Milutin, Orlović, Saša, "Improving the Monitoring and Control of Egg Vitality of Lymantria dispar Linnaeus 1758 Using an Innovative Device and Procedure for Removing Egg Hairs" in Forests, 15, no. 8 (2024):1426,
https://doi.org/10.3390/f15081426 . .

TY  - JOUR
AU  - Mihajlović, Slavica
AU  - Đorđević, Nataša
AU  - Matijašević, Srđan
AU  - Vlahović, Milica
AU  - Kašić, Vladan
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1269
AB  - The article shows changes in certain mechanical properties of polyvinyl
chloride (PVC) depending on the quality of added limestone as a filler. Natural
limestone and limestone hydrophobicized with stearic acid were added.
Modification experiments were carried out with “wet” and “dry” processes in order
to find out the required amount of stearic acid for a complete surface coating of
limestone - degree of coating 99.90%. Coating of the limestone surface was
achieved in the “wet” process with 1.5% stearic acid, while in the “dry” process
the same degree of coating was achieved with 3% stearic acid. A significant
amount of both “wet” and “dry” modified limestone was prepared. Such a product
was added to PVC mixture in order to investigate mechanical properties of the
obtained PVC product. Research into the mechanical properties of PVC has shown
that PVC containing limestone modified by the “wet” process exhibits better
mechanical properties than that containing limestone modified by the “dry”
process. For example, PVC obtained from a mixture containing limestone modified
by the “wet” process with 1.5% stearic acid shows a better tensile strength of 54.20
MPa, while limestone modified by the “dry” process with 3% stearic acid shows a
tensile strength 53.20 MPa.
PB  - Belgrade : University of Belgrade, Faculty of Mining and Geology
T2  - Underground mining engineering
T1  - Hydrophobized limestone as filler in polymer materials
EP  - 17
IS  - 44
SP  - 11
DO  - 10.5937/podrad2444011M
ER  - 

@article{
author = "Mihajlović, Slavica and Đorđević, Nataša and Matijašević, Srđan and Vlahović, Milica and Kašić, Vladan",
year = "2024",
abstract = "The article shows changes in certain mechanical properties of polyvinyl
chloride (PVC) depending on the quality of added limestone as a filler. Natural
limestone and limestone hydrophobicized with stearic acid were added.
Modification experiments were carried out with “wet” and “dry” processes in order
to find out the required amount of stearic acid for a complete surface coating of
limestone - degree of coating 99.90%. Coating of the limestone surface was
achieved in the “wet” process with 1.5% stearic acid, while in the “dry” process
the same degree of coating was achieved with 3% stearic acid. A significant
amount of both “wet” and “dry” modified limestone was prepared. Such a product
was added to PVC mixture in order to investigate mechanical properties of the
obtained PVC product. Research into the mechanical properties of PVC has shown
that PVC containing limestone modified by the “wet” process exhibits better
mechanical properties than that containing limestone modified by the “dry”
process. For example, PVC obtained from a mixture containing limestone modified
by the “wet” process with 1.5% stearic acid shows a better tensile strength of 54.20
MPa, while limestone modified by the “dry” process with 3% stearic acid shows a
tensile strength 53.20 MPa.",
publisher = "Belgrade : University of Belgrade, Faculty of Mining and Geology",
journal = "Underground mining engineering",
title = "Hydrophobized limestone as filler in polymer materials",
pages = "17-11",
number = "44",
doi = "10.5937/podrad2444011M"
}

Mihajlović, S., Đorđević, N., Matijašević, S., Vlahović, M.,& Kašić, V.. (2024). Hydrophobized limestone as filler in polymer materials. in Underground mining engineering
Belgrade : University of Belgrade, Faculty of Mining and Geology.(44), 11-17.
https://doi.org/10.5937/podrad2444011M

Mihajlović S, Đorđević N, Matijašević S, Vlahović M, Kašić V. Hydrophobized limestone as filler in polymer materials. in Underground mining engineering. 2024;(44):11-17.
doi:10.5937/podrad2444011M .

Mihajlović, Slavica, Đorđević, Nataša, Matijašević, Srđan, Vlahović, Milica, Kašić, Vladan, "Hydrophobized limestone as filler in polymer materials" in Underground mining engineering, no. 44 (2024):11-17,
https://doi.org/10.5937/podrad2444011M . .

TY  - CONF
AU  - Kragović, Milan
AU  - Gulicovski, Jelena
AU  - Milićević, Sonja
AU  - Pašalić, Snežana
AU  - Dašić, Predrag
AU  - Ristović, Ivica
AU  - Stojmenović, Marija
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1275
AB  - The influence of modification on the textural properties of the natural zeolite (NZ) and its efficiency for the heavy metals ions removal from contaminated aqueous solution was investigated. The mineralogical composition of the NZ showed that the dominant mineral is clinoptilolite. The surface of the NZ was modified combining the methods for pure goethite and iron-coated zeolite preparations. After modification, the cation exchange capacities and the specific surface area increased from 30.2 to 52.5 m2/g, i.e., from 141 to 165 meq/100g, respectively. Adsorption experiments were done for different heavy metals initial concentrations (copper(II) 0.8 - 12.6 Cu2+mmol/dm3 or lead(II) 1.9 – 29.0 Pb2+mmol/dm3), for 24h, at pH 4.2, in batch conditions. Results showed positive influence of modification on the heavy metals ions removal. The results were fitted with Langmuir and Freundlich adsorption models, and the best fits were obtained with Freundlich model (R2 > 0.92).
PB  - Springer
C3  - The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023
T1  - Influence of Modification on the Textural Properties of the Natural Zeolite and Its Efficiency for the Heavy Metals Ions Removal from Contaminated Aqueous Solution
EP  - 276
SP  - 267
VL  - 926
DO  - 10.1007/978-3-031-54664-8_25
ER  - 

@conference{
author = "Kragović, Milan and Gulicovski, Jelena and Milićević, Sonja and Pašalić, Snežana and Dašić, Predrag and Ristović, Ivica and Stojmenović, Marija",
year = "2024",
abstract = "The influence of modification on the textural properties of the natural zeolite (NZ) and its efficiency for the heavy metals ions removal from contaminated aqueous solution was investigated. The mineralogical composition of the NZ showed that the dominant mineral is clinoptilolite. The surface of the NZ was modified combining the methods for pure goethite and iron-coated zeolite preparations. After modification, the cation exchange capacities and the specific surface area increased from 30.2 to 52.5 m2/g, i.e., from 141 to 165 meq/100g, respectively. Adsorption experiments were done for different heavy metals initial concentrations (copper(II) 0.8 - 12.6 Cu2+mmol/dm3 or lead(II) 1.9 – 29.0 Pb2+mmol/dm3), for 24h, at pH 4.2, in batch conditions. Results showed positive influence of modification on the heavy metals ions removal. The results were fitted with Langmuir and Freundlich adsorption models, and the best fits were obtained with Freundlich model (R2 > 0.92).",
publisher = "Springer",
journal = "The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023",
title = "Influence of Modification on the Textural Properties of the Natural Zeolite and Its Efficiency for the Heavy Metals Ions Removal from Contaminated Aqueous Solution",
pages = "276-267",
volume = "926",
doi = "10.1007/978-3-031-54664-8_25"
}

Kragović, M., Gulicovski, J., Milićević, S., Pašalić, S., Dašić, P., Ristović, I.,& Stojmenović, M.. (2024). Influence of Modification on the Textural Properties of the Natural Zeolite and Its Efficiency for the Heavy Metals Ions Removal from Contaminated Aqueous Solution. in The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023
Springer., 926, 267-276.
https://doi.org/10.1007/978-3-031-54664-8_25

Kragović M, Gulicovski J, Milićević S, Pašalić S, Dašić P, Ristović I, Stojmenović M. Influence of Modification on the Textural Properties of the Natural Zeolite and Its Efficiency for the Heavy Metals Ions Removal from Contaminated Aqueous Solution. in The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023. 2024;926:267-276.
doi:10.1007/978-3-031-54664-8_25 .

Kragović, Milan, Gulicovski, Jelena, Milićević, Sonja, Pašalić, Snežana, Dašić, Predrag, Ristović, Ivica, Stojmenović, Marija, "Influence of Modification on the Textural Properties of the Natural Zeolite and Its Efficiency for the Heavy Metals Ions Removal from Contaminated Aqueous Solution" in The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023, 926 (2024):267-276,
https://doi.org/10.1007/978-3-031-54664-8_25 . .

TY  - CONF
AU  - Pantović Spajić, Katarina
AU  - Pantović Pavlović, Marijana
AU  - Stopić, Srećko
AU  - Gjumišev, Đorđe
AU  - Marković, Branislav
AU  - Pavlović, Miroslav
AU  - Stojanović, Ksenija
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1273
AB  - This study investigates the electrochemical desulfurization of sulfur-rich subbituminous coal (6.96 wt.%) from the Bogovina Basin using graphite and dimensionally stable anode (DSA) electrodes. The objective was to evaluate and compare the efficacy of these electrodes under varying thermal conditions to determine the optimal operational parameters that balance desulfurization efficiency with energy consumption. Electrochemical assessments were conducted through linear sweep voltammetry (LSV) to derive polarization curves and calculate activation energies, reflecting the intrinsic energy barriers of the desulfurization reactions. These tests were performed across a temperature range from 30°C to 70°C, providing insight into the thermally activated nature of these processes. The results demonstrated that the DSA electrodes outperformed the graphite electrodes in several key areas. Notably, DSA electrodes exhibited higher current densities at equivalent temperatures and potentials, indicating a more robust electrochemical activity conducive to higher desulfurization rates. Moreover, activation energy analysis revealed that DSA electrodes operate with significantly lower energy barriers, facilitating easier and more efficient reaction initiations. Energy consumption metrics were critical in evaluating the operational costs associated with each electrode type. The DSA electrodes were found to consume less energy per kilogram of sulfur removed, particularly at an optimal temperature of 50°C, which was identified as the most energy-efficient operational point. At this temperature, the DSA electrodes achieved peak desulfurization efficiency with the most favorable balance between energy input and desulfurization output. The study substantiates the superiority of DSA electrodes over traditional graphite electrodes for coal desulfurization processes, particularly at the optimal operational temperature of 50°C. The findings highlight significant potential for enhancing the sustainability and cost-effectiveness of coal desulfurization technologies, suggesting a paradigm shift towards the adoption of DSA electrodes in industrial applications to achieve more efficient and environmentally friendly outcomes.
PB  - Belgrade : Serbian society of corrosion and materials protection (UISKOZAM)
C3  - XXV YUCORR Meeting point of the science and practice in the fields of corrosion, materials and environmental protection
T1  - Comparative Study of Activation Energy and Desulfurization Efficiency of Coal in Graphite and Dimensionally Stable Anode (DSA) Electrodes
ER  - 

@conference{
author = "Pantović Spajić, Katarina and Pantović Pavlović, Marijana and Stopić, Srećko and Gjumišev, Đorđe and Marković, Branislav and Pavlović, Miroslav and Stojanović, Ksenija",
year = "2024",
abstract = "This study investigates the electrochemical desulfurization of sulfur-rich subbituminous coal (6.96 wt.%) from the Bogovina Basin using graphite and dimensionally stable anode (DSA) electrodes. The objective was to evaluate and compare the efficacy of these electrodes under varying thermal conditions to determine the optimal operational parameters that balance desulfurization efficiency with energy consumption. Electrochemical assessments were conducted through linear sweep voltammetry (LSV) to derive polarization curves and calculate activation energies, reflecting the intrinsic energy barriers of the desulfurization reactions. These tests were performed across a temperature range from 30°C to 70°C, providing insight into the thermally activated nature of these processes. The results demonstrated that the DSA electrodes outperformed the graphite electrodes in several key areas. Notably, DSA electrodes exhibited higher current densities at equivalent temperatures and potentials, indicating a more robust electrochemical activity conducive to higher desulfurization rates. Moreover, activation energy analysis revealed that DSA electrodes operate with significantly lower energy barriers, facilitating easier and more efficient reaction initiations. Energy consumption metrics were critical in evaluating the operational costs associated with each electrode type. The DSA electrodes were found to consume less energy per kilogram of sulfur removed, particularly at an optimal temperature of 50°C, which was identified as the most energy-efficient operational point. At this temperature, the DSA electrodes achieved peak desulfurization efficiency with the most favorable balance between energy input and desulfurization output. The study substantiates the superiority of DSA electrodes over traditional graphite electrodes for coal desulfurization processes, particularly at the optimal operational temperature of 50°C. The findings highlight significant potential for enhancing the sustainability and cost-effectiveness of coal desulfurization technologies, suggesting a paradigm shift towards the adoption of DSA electrodes in industrial applications to achieve more efficient and environmentally friendly outcomes.",
publisher = "Belgrade : Serbian society of corrosion and materials protection (UISKOZAM)",
journal = "XXV YUCORR Meeting point of the science and practice in the fields of corrosion, materials and environmental protection",
title = "Comparative Study of Activation Energy and Desulfurization Efficiency of Coal in Graphite and Dimensionally Stable Anode (DSA) Electrodes"
}

Pantović Spajić, K., Pantović Pavlović, M., Stopić, S., Gjumišev, Đ., Marković, B., Pavlović, M.,& Stojanović, K.. (2024). Comparative Study of Activation Energy and Desulfurization Efficiency of Coal in Graphite and Dimensionally Stable Anode (DSA) Electrodes. in XXV YUCORR Meeting point of the science and practice in the fields of corrosion, materials and environmental protection
Belgrade : Serbian society of corrosion and materials protection (UISKOZAM)..

Pantović Spajić K, Pantović Pavlović M, Stopić S, Gjumišev Đ, Marković B, Pavlović M, Stojanović K. Comparative Study of Activation Energy and Desulfurization Efficiency of Coal in Graphite and Dimensionally Stable Anode (DSA) Electrodes. in XXV YUCORR Meeting point of the science and practice in the fields of corrosion, materials and environmental protection. 2024;..

Pantović Spajić, Katarina, Pantović Pavlović, Marijana, Stopić, Srećko, Gjumišev, Đorđe, Marković, Branislav, Pavlović, Miroslav, Stojanović, Ksenija, "Comparative Study of Activation Energy and Desulfurization Efficiency of Coal in Graphite and Dimensionally Stable Anode (DSA) Electrodes" in XXV YUCORR Meeting point of the science and practice in the fields of corrosion, materials and environmental protection (2024).

Manojlović, V., Sokić, M., Ercegović, M., Kamberović, Ž., Ranđelović, D., Zarić, M.,& Zakonović, J.. (2024). Razvoj i primena metode XRF unapređena sa tehnikama mašinskog učenja za određivanje sastava troske u industriji čelika. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Manojlović V, Sokić M, Ercegović M, Kamberović Ž, Ranđelović D, Zarić M, Zakonović J. Razvoj i primena metode XRF unapređena sa tehnikama mašinskog učenja za određivanje sastava troske u industriji čelika. 2024;..

Manojlović, Vaso, Sokić, Miroslav, Ercegović, Marija, Kamberović, Željko, Ranđelović, Dragana, Zarić, Milana, Zakonović, Jelena, "Razvoj i primena metode XRF unapređena sa tehnikama mašinskog učenja za određivanje sastava troske u industriji čelika" (2024).

TY  - CONF
AU  - Janković, Ana
AU  - Đošić, Marija
AU  - Stevanović, Milena
AU  - Kojić, Vesna
AU  - Vukašinović-Sekulić, Maja
AU  - Mišković-Stanković, Vesna
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1271
AB  - Osteoarticular implants are designed to facilitate
full recovery of lost function and ensure effective
fixation of the implant. However, challenges
may arise, resulting in implant failure, primarily
attributed to infections at the implantation site
and aseptic loosening. Thus, the surface of an
implant must be altered to simultaneously offer
osteoinductive and antibacterial properties.
Synthetic hydroxyapatite (HAP) is frequently
employed to modify metallic implant surfaces
or serve as a bone filler material. To enhance
its biocompatibility, HAP-based polymer composites
were developed. Among most popular
synthetic polymers, poly(vinyl alcohol) (PVA), is
widely used because of its similar structure to
the native extracellular matrix, along with chitosan
(CS), a natural cationic polysaccharide, that
shows biocompatibility, biodegradability and
antimicrobial action, and could act as a carrier
of antibacterial agents. The antibiotic of choice
was Gentamicin (Gent), a water-soluble aminoglycoside,
with very potent antibacterial activity
for the treatment of wide range of infections,
caused by Gram-negative and Gram-positive
bacteria. The original approach of the presented
research is the single-step electrophoretic deposition
(EPD) on Ti plates of thus prepared biocomposite
that would allow for on-site release of the
drug. Obtained hydroxyapatite/chitosan/poly(vinyl
alcohol/gentamicin (HAP/PVA/CS/Gent) biocomposite
coating exhibited strong antibacterial
effect against E. coli and S. aureus. Gentamicin release
study indicated “burst” release in the first 48
h, with ~ 30% of total gentamicin released from
the HAP/PVA/CS/Gent coating which is beneficial
for the blockage of biofilm formation, followed
by slow and steady release in the later period. Cytotoxic
effect of HAP/PVA/CS/Gent coating was
not pronounced in investigated MRC-5 and L929
cell lines. Also, in MRC-5 fibroblast cells, alkaline
phosphatase levels doubled when in contact
with HAP/PVA/CS/Gent, indicating good osteogenic
properties. The overall construct on the
substrate in such a form would be well-advanced
arrangement for future medical device improvement
of skeletal implants.
PB  - Belgrade : Serbian Society for Microbiology
C3  - XIII SERBIAN MICROBIOLOGY CONGRESS with international participation, MIKROMED REGIO 5, UMS Series 24: „FROM BIOTECHNOLOGY TO HUMAN AND PLANETARY HEALTH"
T1  - Electrochemically synthesized biocomposite poly(vinyl alcohol)/chitosan-based coatings for medical applications
EP  - 182
SP  - 182
ER  - 

@conference{
author = "Janković, Ana and Đošić, Marija and Stevanović, Milena and Kojić, Vesna and Vukašinović-Sekulić, Maja and Mišković-Stanković, Vesna",
year = "2024",
abstract = "Osteoarticular implants are designed to facilitate
full recovery of lost function and ensure effective
fixation of the implant. However, challenges
may arise, resulting in implant failure, primarily
attributed to infections at the implantation site
and aseptic loosening. Thus, the surface of an
implant must be altered to simultaneously offer
osteoinductive and antibacterial properties.
Synthetic hydroxyapatite (HAP) is frequently
employed to modify metallic implant surfaces
or serve as a bone filler material. To enhance
its biocompatibility, HAP-based polymer composites
were developed. Among most popular
synthetic polymers, poly(vinyl alcohol) (PVA), is
widely used because of its similar structure to
the native extracellular matrix, along with chitosan
(CS), a natural cationic polysaccharide, that
shows biocompatibility, biodegradability and
antimicrobial action, and could act as a carrier
of antibacterial agents. The antibiotic of choice
was Gentamicin (Gent), a water-soluble aminoglycoside,
with very potent antibacterial activity
for the treatment of wide range of infections,
caused by Gram-negative and Gram-positive
bacteria. The original approach of the presented
research is the single-step electrophoretic deposition
(EPD) on Ti plates of thus prepared biocomposite
that would allow for on-site release of the
drug. Obtained hydroxyapatite/chitosan/poly(vinyl
alcohol/gentamicin (HAP/PVA/CS/Gent) biocomposite
coating exhibited strong antibacterial
effect against E. coli and S. aureus. Gentamicin release
study indicated “burst” release in the first 48
h, with ~ 30% of total gentamicin released from
the HAP/PVA/CS/Gent coating which is beneficial
for the blockage of biofilm formation, followed
by slow and steady release in the later period. Cytotoxic
effect of HAP/PVA/CS/Gent coating was
not pronounced in investigated MRC-5 and L929
cell lines. Also, in MRC-5 fibroblast cells, alkaline
phosphatase levels doubled when in contact
with HAP/PVA/CS/Gent, indicating good osteogenic
properties. The overall construct on the
substrate in such a form would be well-advanced
arrangement for future medical device improvement
of skeletal implants.",
publisher = "Belgrade : Serbian Society for Microbiology",
journal = "XIII SERBIAN MICROBIOLOGY CONGRESS with international participation, MIKROMED REGIO 5, UMS Series 24: „FROM BIOTECHNOLOGY TO HUMAN AND PLANETARY HEALTH"",
title = "Electrochemically synthesized biocomposite poly(vinyl alcohol)/chitosan-based coatings for medical applications",
pages = "182-182"
}

Janković, A., Đošić, M., Stevanović, M., Kojić, V., Vukašinović-Sekulić, M.,& Mišković-Stanković, V.. (2024). Electrochemically synthesized biocomposite poly(vinyl alcohol)/chitosan-based coatings for medical applications. in XIII SERBIAN MICROBIOLOGY CONGRESS with international participation, MIKROMED REGIO 5, UMS Series 24: „FROM BIOTECHNOLOGY TO HUMAN AND PLANETARY HEALTH"
Belgrade : Serbian Society for Microbiology., 182-182.

Janković A, Đošić M, Stevanović M, Kojić V, Vukašinović-Sekulić M, Mišković-Stanković V. Electrochemically synthesized biocomposite poly(vinyl alcohol)/chitosan-based coatings for medical applications. in XIII SERBIAN MICROBIOLOGY CONGRESS with international participation, MIKROMED REGIO 5, UMS Series 24: „FROM BIOTECHNOLOGY TO HUMAN AND PLANETARY HEALTH". 2024;:182-182..

Janković, Ana, Đošić, Marija, Stevanović, Milena, Kojić, Vesna, Vukašinović-Sekulić, Maja, Mišković-Stanković, Vesna, "Electrochemically synthesized biocomposite poly(vinyl alcohol)/chitosan-based coatings for medical applications" in XIII SERBIAN MICROBIOLOGY CONGRESS with international participation, MIKROMED REGIO 5, UMS Series 24: „FROM BIOTECHNOLOGY TO HUMAN AND PLANETARY HEALTH" (2024):182-182.

TY  - CONF
AU  - Jaćević, Vesna
AU  - Obradović, Milena
AU  - Milovanović, Zoran
AU  - Amidžić, Ljiljana
AU  - Nežić, Lana
AU  - Knežević, Milena
AU  - Krajišnik, Danina
AU  - Daković, Aleksandra
PY  - 2024
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1268
AB  - Since natural clays have their toxicological profiles and their modification can change this property, acute toxicological evaluation on the two modified natural clays by chitosan, signed as modified bentonite (MBNT) and modified halloysite (MHAL) was performed in this study.
PB  - Athens: The Federation of European Pharmacological Societies
C3  - 9th European Congress of Pharmacology
T1  - Acute toxicological profiles of the selected modified natural clays in rats
EP  - 125
SP  - 125
ER  - 

@conference{
author = "Jaćević, Vesna and Obradović, Milena and Milovanović, Zoran and Amidžić, Ljiljana and Nežić, Lana and Knežević, Milena and Krajišnik, Danina and Daković, Aleksandra",
year = "2024",
abstract = "Since natural clays have their toxicological profiles and their modification can change this property, acute toxicological evaluation on the two modified natural clays by chitosan, signed as modified bentonite (MBNT) and modified halloysite (MHAL) was performed in this study.",
publisher = "Athens: The Federation of European Pharmacological Societies",
journal = "9th European Congress of Pharmacology",
title = "Acute toxicological profiles of the selected modified natural clays in rats",
pages = "125-125"
}

Jaćević, V., Obradović, M., Milovanović, Z., Amidžić, L., Nežić, L., Knežević, M., Krajišnik, D.,& Daković, A.. (2024). Acute toxicological profiles of the selected modified natural clays in rats. in 9th European Congress of Pharmacology
Athens: The Federation of European Pharmacological Societies., 125-125.

Jaćević V, Obradović M, Milovanović Z, Amidžić L, Nežić L, Knežević M, Krajišnik D, Daković A. Acute toxicological profiles of the selected modified natural clays in rats. in 9th European Congress of Pharmacology. 2024;:125-125..

Jaćević, Vesna, Obradović, Milena, Milovanović, Zoran, Amidžić, Ljiljana, Nežić, Lana, Knežević, Milena, Krajišnik, Danina, Daković, Aleksandra, "Acute toxicological profiles of the selected modified natural clays in rats" in 9th European Congress of Pharmacology (2024):125-125.