TY  - CONF
AU  - Pantović Pavlović, Marijana
AU  - Eraković, Sanja
AU  - Pavlović, Miroslav
AU  - Pantović Spajić, Katarina
AU  - Panić, Vladimir
AU  - Pavlović, Miomir
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1140
AB  - Hydroxyapatite (HAp) is the most suitable biocompatible material for bone implant coatings.
However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites.
In this study, a novel in situ synthesis of HAp coating on titanium was presented. HAp was anaphoretically
deposited from alkaline-ethanol suspension in one step process. Morphology of the coating was investigated by
optical microscopy, while deposited HAp was characterized using ATR-FTIR. It was concluded that HAp has
excellent coverage of the surface without delamination. The obtained coating can be good material for bone
implants due to solving HAp brittleness.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - "ECOLOGICAL TRUTH" ECO-IST'17
T1  - In Situ Synthesis of Biocompatible Composite Layer of Hydroxyapatite/Passive Oxide Surfaces on the Modified Titanium
EP  - 306
SP  - 301
ER  - 

@conference{
author = "Pantović Pavlović, Marijana and Eraković, Sanja and Pavlović, Miroslav and Pantović Spajić, Katarina and Panić, Vladimir and Pavlović, Miomir",
year = "2017",
abstract = "Hydroxyapatite (HAp) is the most suitable biocompatible material for bone implant coatings.
However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites.
In this study, a novel in situ synthesis of HAp coating on titanium was presented. HAp was anaphoretically
deposited from alkaline-ethanol suspension in one step process. Morphology of the coating was investigated by
optical microscopy, while deposited HAp was characterized using ATR-FTIR. It was concluded that HAp has
excellent coverage of the surface without delamination. The obtained coating can be good material for bone
implants due to solving HAp brittleness.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = ""ECOLOGICAL TRUTH" ECO-IST'17",
title = "In Situ Synthesis of Biocompatible Composite Layer of Hydroxyapatite/Passive Oxide Surfaces on the Modified Titanium",
pages = "306-301"
}

Pantović Pavlović, M., Eraković, S., Pavlović, M., Pantović Spajić, K., Panić, V.,& Pavlović, M.. (2017). In Situ Synthesis of Biocompatible Composite Layer of Hydroxyapatite/Passive Oxide Surfaces on the Modified Titanium. in "ECOLOGICAL TRUTH" ECO-IST'17
Bor : University of Belgrade, Technical Faculty in Bor., 301-306.

Pantović Pavlović M, Eraković S, Pavlović M, Pantović Spajić K, Panić V, Pavlović M. In Situ Synthesis of Biocompatible Composite Layer of Hydroxyapatite/Passive Oxide Surfaces on the Modified Titanium. in "ECOLOGICAL TRUTH" ECO-IST'17. 2017;:301-306..

Pantović Pavlović, Marijana, Eraković, Sanja, Pavlović, Miroslav, Pantović Spajić, Katarina, Panić, Vladimir, Pavlović, Miomir, "In Situ Synthesis of Biocompatible Composite Layer of Hydroxyapatite/Passive Oxide Surfaces on the Modified Titanium" in "ECOLOGICAL TRUTH" ECO-IST'17 (2017):301-306.

TY  - CONF
AU  - Marković, Branislav
AU  - Manasijević, Dragan
AU  - Sokić, Miroslav
AU  - Talijan, Nadežda
AU  - Štrbac, Nada
AU  - Manojlović, Vaso
AU  - Janjušević, Zoran
AU  - Bugarčić, Mladen
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/951
AB  - High toxicity of lead and damaging effects on the environment resulted in its prohibited
use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great
effort has been made on the development of new Pb-free soldering and brazing materials
[1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based
advanced lead-free solder materials for high temperature application [6-8]. The results of
phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from
bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations
were performed using DTA/DSC experimental methods, while thermodynamic calculation
was done according to the CALPHAD method using PANDAT software. The results of the
DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section,
including liquidus temperatures and other phase transition temperatures are presented in
graphical abstract. The phase diagram of the investigated Bi-CuNi section has been
calculated using PANDAT software and is presented in graphical abstract, together with
experimentally determined DTA/DSC points. It could be noticed that calculated phase
diagram is in good agreement with DTA/DSC experiments.
PB  - Kosovska Mitrovica : Fakultet Tehničkih nauka
C3  - Osmi simpozijum o termodinamici i faznim dijagramima
T1  - Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system
EP  - 83
SP  - 81
ER  - 

@conference{
author = "Marković, Branislav and Manasijević, Dragan and Sokić, Miroslav and Talijan, Nadežda and Štrbac, Nada and Manojlović, Vaso and Janjušević, Zoran and Bugarčić, Mladen",
year = "2017",
abstract = "High toxicity of lead and damaging effects on the environment resulted in its prohibited
use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great
effort has been made on the development of new Pb-free soldering and brazing materials
[1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based
advanced lead-free solder materials for high temperature application [6-8]. The results of
phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from
bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations
were performed using DTA/DSC experimental methods, while thermodynamic calculation
was done according to the CALPHAD method using PANDAT software. The results of the
DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section,
including liquidus temperatures and other phase transition temperatures are presented in
graphical abstract. The phase diagram of the investigated Bi-CuNi section has been
calculated using PANDAT software and is presented in graphical abstract, together with
experimentally determined DTA/DSC points. It could be noticed that calculated phase
diagram is in good agreement with DTA/DSC experiments.",
publisher = "Kosovska Mitrovica : Fakultet Tehničkih nauka",
journal = "Osmi simpozijum o termodinamici i faznim dijagramima",
title = "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system",
pages = "83-81"
}

Marković, B., Manasijević, D., Sokić, M., Talijan, N., Štrbac, N., Manojlović, V., Janjušević, Z.,& Bugarčić, M.. (2017). Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima
Kosovska Mitrovica : Fakultet Tehničkih nauka., 81-83.

Marković B, Manasijević D, Sokić M, Talijan N, Štrbac N, Manojlović V, Janjušević Z, Bugarčić M. Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima. 2017;:81-83..

Marković, Branislav, Manasijević, Dragan, Sokić, Miroslav, Talijan, Nadežda, Štrbac, Nada, Manojlović, Vaso, Janjušević, Zoran, Bugarčić, Mladen, "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system" in Osmi simpozijum o termodinamici i faznim dijagramima (2017):81-83.

TY  - JOUR
AU  - Marković, Branislav
AU  - Manasijević, Dragan
AU  - Sokić, Miroslav
AU  - Manojlović, Vaso
AU  - Patarić, Aleksandra
AU  - Bugarčić, Mladen
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/449
AB  - Ternarni Bi-Cu-Ni sistem je veoma značajan zato što njegove legure pripadaju grupi potencijalnih, naprednih bezolovnih lemnih materijala na bazi Cu-Ni, za primenu na povišenim temperaturama. U ovom radu predstavljeni su rezultati ispitivanja fazne ravnoteže i karakterizacije legura u preseku Bi-Cu0.5Ni0.5 iz ugla bizmuta sa molskim odnosom Cu:Ni = 1:1. Ispitivanja su sprovedena korišćenjem različitih eksperimentalnih metoda - DTA, DSC, SEM-EDS, merenjem tvrdoće i električne provodljivosti, dok je termodinamički proračun urađen u skladu sa CALPHAD metodom primenom PANDAT programa.
AB  - The Bi-Cu-Ni system is a very significant, because its alloys belong to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The results of phase equilibria investigation and characterization of the alloys selected in the Bi-Cu0.5Ni0.5 section from bismuth corner with molar ratio Cu:Ni = 1:1, are presented in this paper. The investigations were performed using different experimental methods - DTA, DSC, SEM-EDS, hardness and electrical conductivity measurements, while thermodynamic calculation was done according to the CALPHAD method using PANDAT software.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Ispitivanje fazne ravnoteže i karakterizacija legura preseka Bi-Cu0.5Ni0.5 ternarnog sistema Bi-Cu-Ni
T1  - Phase equilibria study and characterization of the alloys in the BiCu0.5Ni0.5 section of the Bi-Cu-Ni system
EP  - 685
IS  - 5
SP  - 681
VL  - 72
DO  - 10.5937/tehnika1705681M
UR  - conv_24
ER  - 

@article{
author = "Marković, Branislav and Manasijević, Dragan and Sokić, Miroslav and Manojlović, Vaso and Patarić, Aleksandra and Bugarčić, Mladen",
year = "2017",
abstract = "Ternarni Bi-Cu-Ni sistem je veoma značajan zato što njegove legure pripadaju grupi potencijalnih, naprednih bezolovnih lemnih materijala na bazi Cu-Ni, za primenu na povišenim temperaturama. U ovom radu predstavljeni su rezultati ispitivanja fazne ravnoteže i karakterizacije legura u preseku Bi-Cu0.5Ni0.5 iz ugla bizmuta sa molskim odnosom Cu:Ni = 1:1. Ispitivanja su sprovedena korišćenjem različitih eksperimentalnih metoda - DTA, DSC, SEM-EDS, merenjem tvrdoće i električne provodljivosti, dok je termodinamički proračun urađen u skladu sa CALPHAD metodom primenom PANDAT programa., The Bi-Cu-Ni system is a very significant, because its alloys belong to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The results of phase equilibria investigation and characterization of the alloys selected in the Bi-Cu0.5Ni0.5 section from bismuth corner with molar ratio Cu:Ni = 1:1, are presented in this paper. The investigations were performed using different experimental methods - DTA, DSC, SEM-EDS, hardness and electrical conductivity measurements, while thermodynamic calculation was done according to the CALPHAD method using PANDAT software.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Ispitivanje fazne ravnoteže i karakterizacija legura preseka Bi-Cu0.5Ni0.5 ternarnog sistema Bi-Cu-Ni, Phase equilibria study and characterization of the alloys in the BiCu0.5Ni0.5 section of the Bi-Cu-Ni system",
pages = "685-681",
number = "5",
volume = "72",
doi = "10.5937/tehnika1705681M",
url = "conv_24"
}

Marković, B., Manasijević, D., Sokić, M., Manojlović, V., Patarić, A.,& Bugarčić, M.. (2017). Ispitivanje fazne ravnoteže i karakterizacija legura preseka Bi-Cu0.5Ni0.5 ternarnog sistema Bi-Cu-Ni. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 72(5), 681-685.
https://doi.org/10.5937/tehnika1705681M
conv_24

Marković B, Manasijević D, Sokić M, Manojlović V, Patarić A, Bugarčić M. Ispitivanje fazne ravnoteže i karakterizacija legura preseka Bi-Cu0.5Ni0.5 ternarnog sistema Bi-Cu-Ni. in Tehnika. 2017;72(5):681-685.
doi:10.5937/tehnika1705681M
conv_24 .

Marković, Branislav, Manasijević, Dragan, Sokić, Miroslav, Manojlović, Vaso, Patarić, Aleksandra, Bugarčić, Mladen, "Ispitivanje fazne ravnoteže i karakterizacija legura preseka Bi-Cu0.5Ni0.5 ternarnog sistema Bi-Cu-Ni" in Tehnika, 72, no. 5 (2017):681-685,
https://doi.org/10.5937/tehnika1705681M .,
conv_24 .

TY  - JOUR
AU  - Marković, Branislav
AU  - Manasijević, Dragan
AU  - Talijan, Nadežda
AU  - Sokić, Miroslav
AU  - Štrbac, Nada
AU  - Patarić, Aleksandra
AU  - Bugarčić, Mladen
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/457
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution model along the line with the molar ratio of Cu: Ni = 1:1. The experimental part shows thermal, structural, electrical and mechanical properties based on differential scanning calorimetry (DSC), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), electroconductivity and hardness measurements of the alloys selected in the section from bismuth corner with molar ratio Cu: Ni = 1:1, Cu: Ni = 3:1, and Cu: Ni = 1:3.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties
EP  - 254
IS  - 3
SP  - 241
VL  - 23
DO  - 10.30544/316
UR  - conv_1218
ER  - 

@article{
author = "Marković, Branislav and Manasijević, Dragan and Talijan, Nadežda and Sokić, Miroslav and Štrbac, Nada and Patarić, Aleksandra and Bugarčić, Mladen",
year = "2017",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution model along the line with the molar ratio of Cu: Ni = 1:1. The experimental part shows thermal, structural, electrical and mechanical properties based on differential scanning calorimetry (DSC), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), electroconductivity and hardness measurements of the alloys selected in the section from bismuth corner with molar ratio Cu: Ni = 1:1, Cu: Ni = 3:1, and Cu: Ni = 1:3.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties",
pages = "254-241",
number = "3",
volume = "23",
doi = "10.30544/316",
url = "conv_1218"
}

Marković, B., Manasijević, D., Talijan, N., Sokić, M., Štrbac, N., Patarić, A.,& Bugarčić, M.. (2017). Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 23(3), 241-254.
https://doi.org/10.30544/316
conv_1218

Marković B, Manasijević D, Talijan N, Sokić M, Štrbac N, Patarić A, Bugarčić M. Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties. in Metallurgical & Materials Engineering. 2017;23(3):241-254.
doi:10.30544/316
conv_1218 .

Marković, Branislav, Manasijević, Dragan, Talijan, Nadežda, Sokić, Miroslav, Štrbac, Nada, Patarić, Aleksandra, Bugarčić, Mladen, "Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties" in Metallurgical & Materials Engineering, 23, no. 3 (2017):241-254,
https://doi.org/10.30544/316 .,
conv_1218 .

TY  - JOUR
AU  - Gomidzelović, Lidija
AU  - Pozega, Emina
AU  - Kostov, Ana
AU  - Vuković, Nikola
AU  - Živković, Dragana
AU  - Manasijević, Dragan
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/413
AB  - The results of a thermodynamic-properties calculation conducted using a general solution model (GSM) and an experimental investigation of the microstructures of different shape-memory alloys (SMAs) are presented in this paper. The investigated alloys belong to ternary systems Cu-Al-Zn and Cu-Mn-Ni and to quaternary system Ni-Cu-Fe-Mn. The examinations were conducted using light microscopy (LM) and scanning electron microscopy with energy-dispersive X-ray spectrometry (SEM-EDX).
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in Tehnologije
T1  - Thermodynamic properties and microstructures of different shape-memory alloys
EP  - 53
IS  - 1
SP  - 47
VL  - 50
DO  - 10.17222/mit.2014.212
UR  - conv_751
ER  - 

@article{
author = "Gomidzelović, Lidija and Pozega, Emina and Kostov, Ana and Vuković, Nikola and Živković, Dragana and Manasijević, Dragan",
year = "2016",
abstract = "The results of a thermodynamic-properties calculation conducted using a general solution model (GSM) and an experimental investigation of the microstructures of different shape-memory alloys (SMAs) are presented in this paper. The investigated alloys belong to ternary systems Cu-Al-Zn and Cu-Mn-Ni and to quaternary system Ni-Cu-Fe-Mn. The examinations were conducted using light microscopy (LM) and scanning electron microscopy with energy-dispersive X-ray spectrometry (SEM-EDX).",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in Tehnologije",
title = "Thermodynamic properties and microstructures of different shape-memory alloys",
pages = "53-47",
number = "1",
volume = "50",
doi = "10.17222/mit.2014.212",
url = "conv_751"
}

Gomidzelović, L., Pozega, E., Kostov, A., Vuković, N., Živković, D.,& Manasijević, D.. (2016). Thermodynamic properties and microstructures of different shape-memory alloys. in Materiali in Tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 50(1), 47-53.
https://doi.org/10.17222/mit.2014.212
conv_751

Gomidzelović L, Pozega E, Kostov A, Vuković N, Živković D, Manasijević D. Thermodynamic properties and microstructures of different shape-memory alloys. in Materiali in Tehnologije. 2016;50(1):47-53.
doi:10.17222/mit.2014.212
conv_751 .

Gomidzelović, Lidija, Pozega, Emina, Kostov, Ana, Vuković, Nikola, Živković, Dragana, Manasijević, Dragan, "Thermodynamic properties and microstructures of different shape-memory alloys" in Materiali in Tehnologije, 50, no. 1 (2016):47-53,
https://doi.org/10.17222/mit.2014.212 .,
conv_751 .

TY  - CONF
AU  - Gomidželović, Lidija
AU  - Požega, Emina
AU  - Vuković, Nikola
AU  - Kostov, Ana
AU  - Živković, Dragana
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/826
AB  - The results of microstructure investigation of different ternary and quaternary shape memory alloys are presented in this paper. Investigated alloys belong to the ternary systems Cu-Al-Zn and Cu-Mn-Ni and quaternary system Ni-Cu-Fe-Mn. Testing was carried out using the light optic microscopy (LOM) and scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX).
PB  - Bor : Mining and Metallurgy Institute Bor
C3  - 47th International October Conference on Mining and Metallurgy – IOC 2015
T1  - Microstructure of different multicomponent shape memory alloys
EP  - 208
SP  - 205
ER  - 

@conference{
author = "Gomidželović, Lidija and Požega, Emina and Vuković, Nikola and Kostov, Ana and Živković, Dragana",
year = "2015",
abstract = "The results of microstructure investigation of different ternary and quaternary shape memory alloys are presented in this paper. Investigated alloys belong to the ternary systems Cu-Al-Zn and Cu-Mn-Ni and quaternary system Ni-Cu-Fe-Mn. Testing was carried out using the light optic microscopy (LOM) and scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX).",
publisher = "Bor : Mining and Metallurgy Institute Bor",
journal = "47th International October Conference on Mining and Metallurgy – IOC 2015",
title = "Microstructure of different multicomponent shape memory alloys",
pages = "208-205"
}

Gomidželović, L., Požega, E., Vuković, N., Kostov, A.,& Živković, D.. (2015). Microstructure of different multicomponent shape memory alloys. in 47th International October Conference on Mining and Metallurgy – IOC 2015
Bor : Mining and Metallurgy Institute Bor., 205-208.

Gomidželović L, Požega E, Vuković N, Kostov A, Živković D. Microstructure of different multicomponent shape memory alloys. in 47th International October Conference on Mining and Metallurgy – IOC 2015. 2015;:205-208..

Gomidželović, Lidija, Požega, Emina, Vuković, Nikola, Kostov, Ana, Živković, Dragana, "Microstructure of different multicomponent shape memory alloys" in 47th International October Conference on Mining and Metallurgy – IOC 2015 (2015):205-208.

TY  - JOUR
AU  - Gomidzelović, Lidija
AU  - Pozega, Emina
AU  - Kostov, Ana
AU  - Vuković, Nikola
AU  - Krstić, Vesna
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/353
AB  - The thermodynamic properties and the microstructure, hardness and electrical conductivity of shape memory alloys (SMAs) belonging to ternary Cu-Al-Zn system were studied by Muggianu model and experiment, respectively. The isothermal section of phase diagram at 293 K was calculated using Thermo-Calc software. Experiments were conducted by X-ray diffraction, light optic microscopy, scanning electron microscopy with energy dispersive X-ray spectrometry, hardness and electrical conductivity measurements. The calculated values of thermodynamic properties indicate that Cu shows good miscibility with Al and Zn in all investigated alloys. The microstructural analysis of samples reveals that the structure consists of large and polygonal grains.
PB  - Elsevier Science Bv, Amsterdam
T2  - Transactions of Nonferrous Metals Society of China
T1  - Thermodynamics and characterization of shape memory Cu-Al-Zn alloys
EP  - 2636
IS  - 8
SP  - 2630
VL  - 25
DO  - 10.1016/S1003-6326(15)63885-7
UR  - conv_737
ER  - 

@article{
author = "Gomidzelović, Lidija and Pozega, Emina and Kostov, Ana and Vuković, Nikola and Krstić, Vesna and Živković, Dragana and Balanović, Ljubiša",
year = "2015",
abstract = "The thermodynamic properties and the microstructure, hardness and electrical conductivity of shape memory alloys (SMAs) belonging to ternary Cu-Al-Zn system were studied by Muggianu model and experiment, respectively. The isothermal section of phase diagram at 293 K was calculated using Thermo-Calc software. Experiments were conducted by X-ray diffraction, light optic microscopy, scanning electron microscopy with energy dispersive X-ray spectrometry, hardness and electrical conductivity measurements. The calculated values of thermodynamic properties indicate that Cu shows good miscibility with Al and Zn in all investigated alloys. The microstructural analysis of samples reveals that the structure consists of large and polygonal grains.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Transactions of Nonferrous Metals Society of China",
title = "Thermodynamics and characterization of shape memory Cu-Al-Zn alloys",
pages = "2636-2630",
number = "8",
volume = "25",
doi = "10.1016/S1003-6326(15)63885-7",
url = "conv_737"
}

Gomidzelović, L., Pozega, E., Kostov, A., Vuković, N., Krstić, V., Živković, D.,& Balanović, L.. (2015). Thermodynamics and characterization of shape memory Cu-Al-Zn alloys. in Transactions of Nonferrous Metals Society of China
Elsevier Science Bv, Amsterdam., 25(8), 2630-2636.
https://doi.org/10.1016/S1003-6326(15)63885-7
conv_737

Gomidzelović L, Pozega E, Kostov A, Vuković N, Krstić V, Živković D, Balanović L. Thermodynamics and characterization of shape memory Cu-Al-Zn alloys. in Transactions of Nonferrous Metals Society of China. 2015;25(8):2630-2636.
doi:10.1016/S1003-6326(15)63885-7
conv_737 .

Gomidzelović, Lidija, Pozega, Emina, Kostov, Ana, Vuković, Nikola, Krstić, Vesna, Živković, Dragana, Balanović, Ljubiša, "Thermodynamics and characterization of shape memory Cu-Al-Zn alloys" in Transactions of Nonferrous Metals Society of China, 25, no. 8 (2015):2630-2636,
https://doi.org/10.1016/S1003-6326(15)63885-7 .,
conv_737 .

TY  - JOUR
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Mitovski, Aleksandra
AU  - Živković, Dragana
AU  - Marković, Branislav
AU  - Andrić, Velibor
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/373
AB  - U radu su prikazani rezultati DTA/TG analize polimetaličnog sulfidnog koncentrata bakra iz rudnog ležišta 'Veliki Krivelj' (Srbija) u temperaturnom intervalu 25 - 1000 °C, na osnovu koje je predložen mehanizam oksidacije prisutnih sulfida u atmosferi vazduha na povišenim temperaturama. Kao potvrda predloženom mehanizmu, u radu su prezentovani rezultati EDXRF analize polaznog uzorka, XRD analize polaznog uzorka i produkata oksidacije na 550 i 950°C i rezultati SEM/EDS analize polaznog uzorka i produkata oksidacije na 675 °C. Upoređivanjem eksperimentalnih rezultata dobijenih XRD i DTA/TG analizom može se zaključiti da se proces oksidacije ispitivanog koncentrata može podeliti u dva stupnja: prvi stupanj čine reakcije oksidacije sulfida sa karakterističnim egzotermnim efektima ispod 650 °C, dok obrazovanje sulfata i oksisulfata i njihovo razlaganje do oksida bakra i železa čini drugi stupanj, praćen karakterističnim endotermnim efektima na višim temperaturama. Kinetička analiza procesa oksidacije ispitivanog koncentrata izvršena je po metodama Kissingera i Ozawe u neizotermskim uslovima. Rezultati kinetičkih ispitivanja i vrednosti energije aktivacije pokazali su da se proces oksidacije u celom ispitivanom temperaturnom intervalu nalazi u kinetičkoj oblasti.
AB  - The paper presents DTA/TG results of polymetallic sulphide copper concentrate from the mine 'Veliki Krivelj' (Serbia) at 25-1000 °C. The reaction mechanism at elevated temperatures was proposed. As confirmation to the proposed mechanism, the results of EDXRF and, XRD analysis of the initial sample and the oxidation products at 550 and 950 °C, and the results of SEM/EDS analysis of the initial sample and the oxidation products at 675 ° C were presented. It can be concluded that the oxidation process goes through sulfide oxidation with characteristic exothermic effects, followed by sulfates and oxy- sulfates formation and their. Kinetic analysis of the oxidation process concentrates the test was performed according to the methods of Kissinger and Ozawa in non-isothermal conditions. The results of kinetic studies have shown that the oxidation process in the whole investigated temperature range is located in the kinetic field.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Određivanje mehanizma i kinetičkih parametara oksidacije sulfidnih minerala bakra na povišenim temperaturama
T1  - Determination the mechanism and kinetic parameters of copper sulfide minerals oxidation at elevated temperatures
EP  - 65
IS  - 1
SP  - 60
VL  - 70
DO  - 10.5937/tehnika1501060S
UR  - conv_16
ER  - 

@article{
author = "Štrbac, Nada and Sokić, Miroslav and Mitovski, Aleksandra and Živković, Dragana and Marković, Branislav and Andrić, Velibor",
year = "2015",
abstract = "U radu su prikazani rezultati DTA/TG analize polimetaličnog sulfidnog koncentrata bakra iz rudnog ležišta 'Veliki Krivelj' (Srbija) u temperaturnom intervalu 25 - 1000 °C, na osnovu koje je predložen mehanizam oksidacije prisutnih sulfida u atmosferi vazduha na povišenim temperaturama. Kao potvrda predloženom mehanizmu, u radu su prezentovani rezultati EDXRF analize polaznog uzorka, XRD analize polaznog uzorka i produkata oksidacije na 550 i 950°C i rezultati SEM/EDS analize polaznog uzorka i produkata oksidacije na 675 °C. Upoređivanjem eksperimentalnih rezultata dobijenih XRD i DTA/TG analizom može se zaključiti da se proces oksidacije ispitivanog koncentrata može podeliti u dva stupnja: prvi stupanj čine reakcije oksidacije sulfida sa karakterističnim egzotermnim efektima ispod 650 °C, dok obrazovanje sulfata i oksisulfata i njihovo razlaganje do oksida bakra i železa čini drugi stupanj, praćen karakterističnim endotermnim efektima na višim temperaturama. Kinetička analiza procesa oksidacije ispitivanog koncentrata izvršena je po metodama Kissingera i Ozawe u neizotermskim uslovima. Rezultati kinetičkih ispitivanja i vrednosti energije aktivacije pokazali su da se proces oksidacije u celom ispitivanom temperaturnom intervalu nalazi u kinetičkoj oblasti., The paper presents DTA/TG results of polymetallic sulphide copper concentrate from the mine 'Veliki Krivelj' (Serbia) at 25-1000 °C. The reaction mechanism at elevated temperatures was proposed. As confirmation to the proposed mechanism, the results of EDXRF and, XRD analysis of the initial sample and the oxidation products at 550 and 950 °C, and the results of SEM/EDS analysis of the initial sample and the oxidation products at 675 ° C were presented. It can be concluded that the oxidation process goes through sulfide oxidation with characteristic exothermic effects, followed by sulfates and oxy- sulfates formation and their. Kinetic analysis of the oxidation process concentrates the test was performed according to the methods of Kissinger and Ozawa in non-isothermal conditions. The results of kinetic studies have shown that the oxidation process in the whole investigated temperature range is located in the kinetic field.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Određivanje mehanizma i kinetičkih parametara oksidacije sulfidnih minerala bakra na povišenim temperaturama, Determination the mechanism and kinetic parameters of copper sulfide minerals oxidation at elevated temperatures",
pages = "65-60",
number = "1",
volume = "70",
doi = "10.5937/tehnika1501060S",
url = "conv_16"
}

Štrbac, N., Sokić, M., Mitovski, A., Živković, D., Marković, B.,& Andrić, V.. (2015). Određivanje mehanizma i kinetičkih parametara oksidacije sulfidnih minerala bakra na povišenim temperaturama. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 70(1), 60-65.
https://doi.org/10.5937/tehnika1501060S
conv_16

Štrbac N, Sokić M, Mitovski A, Živković D, Marković B, Andrić V. Određivanje mehanizma i kinetičkih parametara oksidacije sulfidnih minerala bakra na povišenim temperaturama. in Tehnika. 2015;70(1):60-65.
doi:10.5937/tehnika1501060S
conv_16 .

Štrbac, Nada, Sokić, Miroslav, Mitovski, Aleksandra, Živković, Dragana, Marković, Branislav, Andrić, Velibor, "Određivanje mehanizma i kinetičkih parametara oksidacije sulfidnih minerala bakra na povišenim temperaturama" in Tehnika, 70, no. 1 (2015):60-65,
https://doi.org/10.5937/tehnika1501060S .,
conv_16 .

TY  - JOUR
AU  - Marković, Branislav
AU  - Živković, D.
AU  - Manasijević, Dragan
AU  - Sokić, Miroslav
AU  - Minić, Duško
AU  - Talijan, Nadežda
AU  - Stajić-Trosić, Jasna
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/325
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB  - Polish Acad Sciences Committee Metallurgy, Krakow
T2  - Archives of Metallurgy and Materials
T1  - Thermal, structural and electrical properties of some bi-cu-ni alloys
EP  - 120
IS  - 1
SP  - 117
VL  - 59
DO  - 10.2478/amm-2014-0018
UR  - conv_689
ER  - 

@article{
author = "Marković, Branislav and Živković, D. and Manasijević, Dragan and Sokić, Miroslav and Minić, Duško and Talijan, Nadežda and Stajić-Trosić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
pages = "120-117",
number = "1",
volume = "59",
doi = "10.2478/amm-2014-0018",
url = "conv_689"
}

Marković, B., Živković, D., Manasijević, D., Sokić, M., Minić, D., Talijan, N.,& Stajić-Trosić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018
conv_689

Marković B, Živković D, Manasijević D, Sokić M, Minić D, Talijan N, Stajić-Trosić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018
conv_689 .

Marković, Branislav, Živković, D., Manasijević, Dragan, Sokić, Miroslav, Minić, Duško, Talijan, Nadežda, Stajić-Trosić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 .,
conv_689 .

TY  - JOUR
AU  - Živković, D.
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Andrić, Velibor
AU  - Jovanović, I.
AU  - Jovičić, Marija
AU  - Anđelić, B.
AU  - Radosavljević, Slobodan
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/317
AB  - Preliminary results of physicochemical investigation of some archaeometallurgical findings from Kmpije locality in vicinity of Bor (Serbia) are presented in this paper. Ancient samples of prehistoric origin were investigated using different instrumental analytic methods-chemical, differential thermal, X-ray diffraction, and energy dispersive X-ray fluorescence analysis. Obtained results indicate to the presence of ancient metallurgical activities, so locality Kmpije may be considered as an archaeometallurgical site, which should be investigated more in future for more precise details.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)
EP  - 1373
IS  - 2
SP  - 1369
VL  - 118
DO  - 10.1007/s10973-014-4050-6
UR  - conv_712
ER  - 

@article{
author = "Živković, D. and Štrbac, Nada and Sokić, Miroslav and Andrić, Velibor and Jovanović, I. and Jovičić, Marija and Anđelić, B. and Radosavljević, Slobodan",
year = "2014",
abstract = "Preliminary results of physicochemical investigation of some archaeometallurgical findings from Kmpije locality in vicinity of Bor (Serbia) are presented in this paper. Ancient samples of prehistoric origin were investigated using different instrumental analytic methods-chemical, differential thermal, X-ray diffraction, and energy dispersive X-ray fluorescence analysis. Obtained results indicate to the presence of ancient metallurgical activities, so locality Kmpije may be considered as an archaeometallurgical site, which should be investigated more in future for more precise details.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)",
pages = "1373-1369",
number = "2",
volume = "118",
doi = "10.1007/s10973-014-4050-6",
url = "conv_712"
}

Živković, D., Štrbac, N., Sokić, M., Andrić, V., Jovanović, I., Jovičić, M., Anđelić, B.,& Radosavljević, S.. (2014). Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia). in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht., 118(2), 1369-1373.
https://doi.org/10.1007/s10973-014-4050-6
conv_712

Živković D, Štrbac N, Sokić M, Andrić V, Jovanović I, Jovičić M, Anđelić B, Radosavljević S. Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia). in Journal of Thermal Analysis and Calorimetry. 2014;118(2):1369-1373.
doi:10.1007/s10973-014-4050-6
conv_712 .

Živković, D., Štrbac, Nada, Sokić, Miroslav, Andrić, Velibor, Jovanović, I., Jovičić, Marija, Anđelić, B., Radosavljević, Slobodan, "Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)" in Journal of Thermal Analysis and Calorimetry, 118, no. 2 (2014):1369-1373,
https://doi.org/10.1007/s10973-014-4050-6 .,
conv_712 .

TY  - JOUR
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
AU  - Mitovski, Aleksandra
AU  - Talijan, Nadežda
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/301
AB  - Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu.
AB  - Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Recycling and Sustainable Development
T1  - Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja
T1  - Nanomaterials environmental risks and recycling: Actual issues
EP  - 8
IS  - 1
SP  - 1
VL  - 7
DO  - 10.5937/ror1401001Z
UR  - conv_402
ER  - 

@article{
author = "Živković, Dragana and Balanović, Ljubiša and Mitovski, Aleksandra and Talijan, Nadežda and Štrbac, Nada and Sokić, Miroslav and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan",
year = "2014",
abstract = "Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu., Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Recycling and Sustainable Development",
title = "Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja, Nanomaterials environmental risks and recycling: Actual issues",
pages = "8-1",
number = "1",
volume = "7",
doi = "10.5937/ror1401001Z",
url = "conv_402"
}

Živković, D., Balanović, L., Mitovski, A., Talijan, N., Štrbac, N., Sokić, M., Manasijević, D., Minić, D.,& Ćosović, V.. (2014). Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja. in Recycling and Sustainable Development
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 7(1), 1-8.
https://doi.org/10.5937/ror1401001Z
conv_402

Živković D, Balanović L, Mitovski A, Talijan N, Štrbac N, Sokić M, Manasijević D, Minić D, Ćosović V. Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja. in Recycling and Sustainable Development. 2014;7(1):1-8.
doi:10.5937/ror1401001Z
conv_402 .

Živković, Dragana, Balanović, Ljubiša, Mitovski, Aleksandra, Talijan, Nadežda, Štrbac, Nada, Sokić, Miroslav, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, "Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja" in Recycling and Sustainable Development, 7, no. 1 (2014):1-8,
https://doi.org/10.5937/ror1401001Z .,
conv_402 .

TY  - JOUR
AU  - Gomidzelović, Lidija
AU  - Pozega, Emina
AU  - Kostov, Ana
AU  - Vuković, Nikola
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/323
AB  - The results of an experimental investigation of structural, mechanical and electrical characteristics of different Cu-Al-Zn alloys are presented in this paper. The investigations were conducted using light optic microscopy, SEM-EDX analysis, hardness and electroconductivity measurements.
PB  - Carl Hanser Verlag, Munich
T2  - Materials Testing
T1  - Investigation of the Structural, Mechanical and Electrical Properties of Cu-Al-Zn Shape Memory Alloys
EP  - 489
IS  - 6
SP  - 486
VL  - 56
DO  - 10.3139/120.110591
UR  - conv_695
ER  - 

@article{
author = "Gomidzelović, Lidija and Pozega, Emina and Kostov, Ana and Vuković, Nikola",
year = "2014",
abstract = "The results of an experimental investigation of structural, mechanical and electrical characteristics of different Cu-Al-Zn alloys are presented in this paper. The investigations were conducted using light optic microscopy, SEM-EDX analysis, hardness and electroconductivity measurements.",
publisher = "Carl Hanser Verlag, Munich",
journal = "Materials Testing",
title = "Investigation of the Structural, Mechanical and Electrical Properties of Cu-Al-Zn Shape Memory Alloys",
pages = "489-486",
number = "6",
volume = "56",
doi = "10.3139/120.110591",
url = "conv_695"
}

Gomidzelović, L., Pozega, E., Kostov, A.,& Vuković, N.. (2014). Investigation of the Structural, Mechanical and Electrical Properties of Cu-Al-Zn Shape Memory Alloys. in Materials Testing
Carl Hanser Verlag, Munich., 56(6), 486-489.
https://doi.org/10.3139/120.110591
conv_695

Gomidzelović L, Pozega E, Kostov A, Vuković N. Investigation of the Structural, Mechanical and Electrical Properties of Cu-Al-Zn Shape Memory Alloys. in Materials Testing. 2014;56(6):486-489.
doi:10.3139/120.110591
conv_695 .

Gomidzelović, Lidija, Pozega, Emina, Kostov, Ana, Vuković, Nikola, "Investigation of the Structural, Mechanical and Electrical Properties of Cu-Al-Zn Shape Memory Alloys" in Materials Testing, 56, no. 6 (2014):486-489,
https://doi.org/10.3139/120.110591 .,
conv_695 .

TY  - JOUR
AU  - Živković, D.
AU  - Ćosović, Vladan
AU  - Živković, Z.
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Talijan, Nadežda
AU  - Boyanov, B.
AU  - Mitovski, Aleksandra
PY  - 2013
UR  - https://ritnms.itnms.ac.rs/handle/123456789/278
AB  - The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials Science in Semiconductor Processing
T1  - Kinetic investigation of silver sulfide phase transformations
EP  - 220
IS  - 1
SP  - 217
VL  - 16
DO  - 10.1016/j.mssp.2012.06.023
UR  - conv_639
ER  - 

@article{
author = "Živković, D. and Ćosović, Vladan and Živković, Z. and Štrbac, Nada and Sokić, Miroslav and Talijan, Nadežda and Boyanov, B. and Mitovski, Aleksandra",
year = "2013",
abstract = "The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials Science in Semiconductor Processing",
title = "Kinetic investigation of silver sulfide phase transformations",
pages = "220-217",
number = "1",
volume = "16",
doi = "10.1016/j.mssp.2012.06.023",
url = "conv_639"
}

Živković, D., Ćosović, V., Živković, Z., Štrbac, N., Sokić, M., Talijan, N., Boyanov, B.,& Mitovski, A.. (2013). Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing
Elsevier Sci Ltd, Oxford., 16(1), 217-220.
https://doi.org/10.1016/j.mssp.2012.06.023
conv_639

Živković D, Ćosović V, Živković Z, Štrbac N, Sokić M, Talijan N, Boyanov B, Mitovski A. Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing. 2013;16(1):217-220.
doi:10.1016/j.mssp.2012.06.023
conv_639 .

Živković, D., Ćosović, Vladan, Živković, Z., Štrbac, Nada, Sokić, Miroslav, Talijan, Nadežda, Boyanov, B., Mitovski, Aleksandra, "Kinetic investigation of silver sulfide phase transformations" in Materials Science in Semiconductor Processing, 16, no. 1 (2013):217-220,
https://doi.org/10.1016/j.mssp.2012.06.023 .,
conv_639 .

TY  - JOUR
AU  - Živković, D.
AU  - Sokić, Miroslav
AU  - Živković, Z.
AU  - Manasijević, Dragan
AU  - Balanović, Ljubiša
AU  - Štrbac, Nada
AU  - Ćosović, Vladan
AU  - Boyanov, B.
PY  - 2013
UR  - https://ritnms.itnms.ac.rs/handle/123456789/252
AB  - The results of thermal study and mechanism of the oxidation process of synthetic Ag2S in air are presented in this article based on the comparative analysis of DTA and XRD results, as well as by constructed phase stability diagrams (PSD) for the Ag-S-O system.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Thermal study and mechanism of Ag2S oxidation in air
EP  - 1176
IS  - 2
SP  - 1173
VL  - 111
DO  - 10.1007/s10973-012-2300-z
UR  - conv_644
ER  - 

@article{
author = "Živković, D. and Sokić, Miroslav and Živković, Z. and Manasijević, Dragan and Balanović, Ljubiša and Štrbac, Nada and Ćosović, Vladan and Boyanov, B.",
year = "2013",
abstract = "The results of thermal study and mechanism of the oxidation process of synthetic Ag2S in air are presented in this article based on the comparative analysis of DTA and XRD results, as well as by constructed phase stability diagrams (PSD) for the Ag-S-O system.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Thermal study and mechanism of Ag2S oxidation in air",
pages = "1176-1173",
number = "2",
volume = "111",
doi = "10.1007/s10973-012-2300-z",
url = "conv_644"
}

Živković, D., Sokić, M., Živković, Z., Manasijević, D., Balanović, L., Štrbac, N., Ćosović, V.,& Boyanov, B.. (2013). Thermal study and mechanism of Ag2S oxidation in air. in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht., 111(2), 1173-1176.
https://doi.org/10.1007/s10973-012-2300-z
conv_644

Živković D, Sokić M, Živković Z, Manasijević D, Balanović L, Štrbac N, Ćosović V, Boyanov B. Thermal study and mechanism of Ag2S oxidation in air. in Journal of Thermal Analysis and Calorimetry. 2013;111(2):1173-1176.
doi:10.1007/s10973-012-2300-z
conv_644 .

Živković, D., Sokić, Miroslav, Živković, Z., Manasijević, Dragan, Balanović, Ljubiša, Štrbac, Nada, Ćosović, Vladan, Boyanov, B., "Thermal study and mechanism of Ag2S oxidation in air" in Journal of Thermal Analysis and Calorimetry, 111, no. 2 (2013):1173-1176,
https://doi.org/10.1007/s10973-012-2300-z .,
conv_644 .

TY  - JOUR
AU  - Živković, Dragana
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Andrić, Velibor
AU  - Anđelić, Branka
AU  - Jovanović, Igor
AU  - Jovičić, Marija
AU  - Nikolić, Dušica
PY  - 2012
UR  - https://ritnms.itnms.ac.rs/handle/123456789/235
AB  - Bor and its surroundings are well known for long and rich tradition in mining and metallurgical activities, as well as by numerous archaeometallurgical localities. The results of investigation of archaeometallurgical findings from Šetaće and Paulešti localities near Bor are presented in this paper. Research of slag samples was done using chemical analysis, DTA, XRD and EDXRF in order to confirm early metallurgical works at mentioned two localities.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia)
EP  - 164
IS  - 2
SP  - 159
VL  - 18
UR  - conv_478
ER  - 

@article{
author = "Živković, Dragana and Štrbac, Nada and Sokić, Miroslav and Andrić, Velibor and Anđelić, Branka and Jovanović, Igor and Jovičić, Marija and Nikolić, Dušica",
year = "2012",
abstract = "Bor and its surroundings are well known for long and rich tradition in mining and metallurgical activities, as well as by numerous archaeometallurgical localities. The results of investigation of archaeometallurgical findings from Šetaće and Paulešti localities near Bor are presented in this paper. Research of slag samples was done using chemical analysis, DTA, XRD and EDXRF in order to confirm early metallurgical works at mentioned two localities.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia)",
pages = "164-159",
number = "2",
volume = "18",
url = "conv_478"
}

Živković, D., Štrbac, N., Sokić, M., Andrić, V., Anđelić, B., Jovanović, I., Jovičić, M.,& Nikolić, D.. (2012). Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia). in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 18(2), 159-164.
conv_478

Živković D, Štrbac N, Sokić M, Andrić V, Anđelić B, Jovanović I, Jovičić M, Nikolić D. Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia). in Metallurgical & Materials Engineering. 2012;18(2):159-164.
conv_478 .

Živković, Dragana, Štrbac, Nada, Sokić, Miroslav, Andrić, Velibor, Anđelić, Branka, Jovanović, Igor, Jovičić, Marija, Nikolić, Dušica, "Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia)" in Metallurgical & Materials Engineering, 18, no. 2 (2012):159-164,
conv_478 .