Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system
Аутори
Marković, BranislavManasijević, Dragan
Sokić, Miroslav
Talijan, Nadežda
Štrbac, Nada
Manojlović, Vaso
Janjušević, Zoran
Bugarčić, Mladen
Остала ауторства
Minić, DuškoКонференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
High toxicity of lead and damaging effects on the environment resulted in its prohibited
use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great
effort has been made on the development of new Pb-free soldering and brazing materials
[1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based
advanced lead-free solder materials for high temperature application [6-8]. The results of
phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from
bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations
were performed using DTA/DSC experimental methods, while thermodynamic calculation
was done according to the CALPHAD method using PANDAT software. The results of the
DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section,
including liquidus temperatures and other phase transition temperatures are presented in
graphical abstract. The phase ...diagram of the investigated Bi-CuNi section has been
calculated using PANDAT software and is presented in graphical abstract, together with
experimentally determined DTA/DSC points. It could be noticed that calculated phase
diagram is in good agreement with DTA/DSC experiments.
Извор:
Osmi simpozijum o termodinamici i faznim dijagramima, 2017, 81-83Издавач:
- Kosovska Mitrovica : Fakultet Tehničkih nauka
Финансирање / пројекти:
- Развој технолошких процеса прераде нестандардних концентрата бакра у циљу оптимизације емисије загађујућих материја (RS-MESTD-Technological Development (TD or TR)-34023)
- Савремени вишекомпонентни метални системи и наноструктурни материјали са различитим функционалним својствима (RS-MESTD-Basic Research (BR or ON)-172037)
Институција/група
Institut za tehnologiju nuklearnih i drugih mineralnih sirovinaTY - CONF AU - Marković, Branislav AU - Manasijević, Dragan AU - Sokić, Miroslav AU - Talijan, Nadežda AU - Štrbac, Nada AU - Manojlović, Vaso AU - Janjušević, Zoran AU - Bugarčić, Mladen PY - 2017 UR - https://ritnms.itnms.ac.rs/handle/123456789/951 AB - High toxicity of lead and damaging effects on the environment resulted in its prohibited use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great effort has been made on the development of new Pb-free soldering and brazing materials [1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application [6-8]. The results of phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations were performed using DTA/DSC experimental methods, while thermodynamic calculation was done according to the CALPHAD method using PANDAT software. The results of the DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section, including liquidus temperatures and other phase transition temperatures are presented in graphical abstract. The phase diagram of the investigated Bi-CuNi section has been calculated using PANDAT software and is presented in graphical abstract, together with experimentally determined DTA/DSC points. It could be noticed that calculated phase diagram is in good agreement with DTA/DSC experiments. PB - Kosovska Mitrovica : Fakultet Tehničkih nauka C3 - Osmi simpozijum o termodinamici i faznim dijagramima T1 - Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system EP - 83 SP - 81 ER -
@conference{ author = "Marković, Branislav and Manasijević, Dragan and Sokić, Miroslav and Talijan, Nadežda and Štrbac, Nada and Manojlović, Vaso and Janjušević, Zoran and Bugarčić, Mladen", year = "2017", abstract = "High toxicity of lead and damaging effects on the environment resulted in its prohibited use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great effort has been made on the development of new Pb-free soldering and brazing materials [1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application [6-8]. The results of phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations were performed using DTA/DSC experimental methods, while thermodynamic calculation was done according to the CALPHAD method using PANDAT software. The results of the DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section, including liquidus temperatures and other phase transition temperatures are presented in graphical abstract. The phase diagram of the investigated Bi-CuNi section has been calculated using PANDAT software and is presented in graphical abstract, together with experimentally determined DTA/DSC points. It could be noticed that calculated phase diagram is in good agreement with DTA/DSC experiments.", publisher = "Kosovska Mitrovica : Fakultet Tehničkih nauka", journal = "Osmi simpozijum o termodinamici i faznim dijagramima", title = "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system", pages = "83-81" }
Marković, B., Manasijević, D., Sokić, M., Talijan, N., Štrbac, N., Manojlović, V., Janjušević, Z.,& Bugarčić, M.. (2017). Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima Kosovska Mitrovica : Fakultet Tehničkih nauka., 81-83.
Marković B, Manasijević D, Sokić M, Talijan N, Štrbac N, Manojlović V, Janjušević Z, Bugarčić M. Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima. 2017;:81-83..
Marković, Branislav, Manasijević, Dragan, Sokić, Miroslav, Talijan, Nadežda, Štrbac, Nada, Manojlović, Vaso, Janjušević, Zoran, Bugarčić, Mladen, "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system" in Osmi simpozijum o termodinamici i faznim dijagramima (2017):81-83.