TY  - CONF
AU  - Trumić, Maja
AU  - Munćan, Nevena
AU  - Trumić, Milan
AU  - Radulović, Dragan
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1065
AB  - Flotation is the process of separation based on the different physical-chemical characteristics of surfaces and their ability to wet with water. The process can be used for separation the primary and secondary materials. This paper presents the results of a laboratory study separation of plastic waste. The aim is to extract the PS plastics from the PS/ABS mixture. Experiments were carried out in a Denver cell at the pH 7 in presence of the Tannic acid as a depressant, and MIBC as a frother. The results showed that the PS plastics has a higher flotation rate constant value and high quality value fover 90%). The results indicate that the ABS and PS could be successfully separated by the froth flotation under the certain conditions. The obtained results were represented by the classical model of the first-order trying to describe the kinetics of plastics flotation with a good correlation coefficient.
PB  - Bor : Mining and Metallurgy Institute Bor
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 50th International October Conference on Mining and Metallurgy
T1  - Separation of the Ps/Abs plastics using the Froth flotation
EP  - 62
SP  - 59
ER  - 

@conference{
author = "Trumić, Maja and Munćan, Nevena and Trumić, Milan and Radulović, Dragan",
year = "2018",
abstract = "Flotation is the process of separation based on the different physical-chemical characteristics of surfaces and their ability to wet with water. The process can be used for separation the primary and secondary materials. This paper presents the results of a laboratory study separation of plastic waste. The aim is to extract the PS plastics from the PS/ABS mixture. Experiments were carried out in a Denver cell at the pH 7 in presence of the Tannic acid as a depressant, and MIBC as a frother. The results showed that the PS plastics has a higher flotation rate constant value and high quality value fover 90%). The results indicate that the ABS and PS could be successfully separated by the froth flotation under the certain conditions. The obtained results were represented by the classical model of the first-order trying to describe the kinetics of plastics flotation with a good correlation coefficient.",
publisher = "Bor : Mining and Metallurgy Institute Bor, Bor : University of Belgrade, Technical Faculty in Bor",
journal = "50th International October Conference on Mining and Metallurgy",
title = "Separation of the Ps/Abs plastics using the Froth flotation",
pages = "62-59"
}

Trumić, M., Munćan, N., Trumić, M.,& Radulović, D.. (2018). Separation of the Ps/Abs plastics using the Froth flotation. in 50th International October Conference on Mining and Metallurgy
Bor : Mining and Metallurgy Institute Bor., 59-62.

Trumić M, Munćan N, Trumić M, Radulović D. Separation of the Ps/Abs plastics using the Froth flotation. in 50th International October Conference on Mining and Metallurgy. 2018;:59-62..

Trumić, Maja, Munćan, Nevena, Trumić, Milan, Radulović, Dragan, "Separation of the Ps/Abs plastics using the Froth flotation" in 50th International October Conference on Mining and Metallurgy (2018):59-62.

TY  - CONF
AU  - Trumić, Maja
AU  - Trumić, Milan
AU  - Munćan, Nevena
AU  - Radulović, Dragan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1066
AB  - Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Flotation separation of thermal heat treated ABS and PS plastics
EP  - 134
SP  - 128
ER  - 

@conference{
author = "Trumić, Maja and Trumić, Milan and Munćan, Nevena and Radulović, Dragan",
year = "2017",
abstract = "Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Flotation separation of thermal heat treated ABS and PS plastics",
pages = "134-128"
}

Trumić, M., Trumić, M., Munćan, N.,& Radulović, D.. (2017). Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 128-134.

Trumić M, Trumić M, Munćan N, Radulović D. Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development. 2017;:128-134..

Trumić, Maja, Trumić, Milan, Munćan, Nevena, Radulović, Dragan, "Flotation separation of thermal heat treated ABS and PS plastics" in XII International Symposium on recycling technologies and sustainable development (2017):128-134.