TY  - CONF
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
AU  - Kostović, Milena
AU  - Jovanović, Vladimir
AU  - Radulović, Dragan
AU  - Todorović, Dejan
AU  - Ivošević, Branislav
PY  - 2023
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1194
AB  - U radu su prikazani rezultati istraživanja iz oblasti usitnjavanja, sakupljani duži niz godina, u Institutu za tehnologiju nuklearnih I drugih mineralnih sirovina. Poznato je da se područja sa frekfencijama preko 3•1011 do 3•1014 Hz nalaze u elektromagnetnom spektru infracrvenog i daleko infracrvenog emitovanog ili apsorbovanog zračenja. U radu su prikazani rezultati kada se materijal i kugle u mlinu nalaze na jednoj od pomenutih frekfencija, što nam omogućava da pomoću Borovog uslova frekfencija pristupimo izračunavanju emitovanih i apsorbovanih molarnih energija. Polimorfne promene materije pri usitnjavanju su promene izazvane fizičkim procesima, odnosno emitovanjem određene količine energije od strane mlina I adsorbovanjem tih energija od strane materijala. Izvršen je pokušaj da se odrede nivoi tih energija. Prikazani rezultati pokazuju da sve jedinke u mlinu pretrpe lokalni pritisak i tada na njima, delimično ili u celini, dolazi do polimorfnih promena materije menjajući fazna stanja i kristalnu strukturu iste. Na zrnima minerala na veoma ograničenim mestima po površini (10-3 do 10-5 cm2) i u kratkim vremenskim periodima trajanja (10-4 s) dolazi do povećanja temperature čak do 1000 C što su autori iz reference [3] nazvali magma plazma modelom slika 1. Rad prikazuje praćenje polimorfnih promena materija preko promena njihovih termodinamičkih veličina. Takođe, postoje i velike razlike polimorfnih promena minerala u zavisnosti od mineraloškog oblika u kojem se materija nalazi.
PB  - Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet
C3  - X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina
T1  - Polimorfne promene materije nastale mlevenjem minerala
EP  - 53
SP  - 39
ER  - 

@conference{
author = "Petrov, Milan and Andrić, Ljubiša and Kostović, Milena and Jovanović, Vladimir and Radulović, Dragan and Todorović, Dejan and Ivošević, Branislav",
year = "2023",
abstract = "U radu su prikazani rezultati istraživanja iz oblasti usitnjavanja, sakupljani duži niz godina, u Institutu za tehnologiju nuklearnih I drugih mineralnih sirovina. Poznato je da se područja sa frekfencijama preko 3•1011 do 3•1014 Hz nalaze u elektromagnetnom spektru infracrvenog i daleko infracrvenog emitovanog ili apsorbovanog zračenja. U radu su prikazani rezultati kada se materijal i kugle u mlinu nalaze na jednoj od pomenutih frekfencija, što nam omogućava da pomoću Borovog uslova frekfencija pristupimo izračunavanju emitovanih i apsorbovanih molarnih energija. Polimorfne promene materije pri usitnjavanju su promene izazvane fizičkim procesima, odnosno emitovanjem određene količine energije od strane mlina I adsorbovanjem tih energija od strane materijala. Izvršen je pokušaj da se odrede nivoi tih energija. Prikazani rezultati pokazuju da sve jedinke u mlinu pretrpe lokalni pritisak i tada na njima, delimično ili u celini, dolazi do polimorfnih promena materije menjajući fazna stanja i kristalnu strukturu iste. Na zrnima minerala na veoma ograničenim mestima po površini (10-3 do 10-5 cm2) i u kratkim vremenskim periodima trajanja (10-4 s) dolazi do povećanja temperature čak do 1000 C što su autori iz reference [3] nazvali magma plazma modelom slika 1. Rad prikazuje praćenje polimorfnih promena materija preko promena njihovih termodinamičkih veličina. Takođe, postoje i velike razlike polimorfnih promena minerala u zavisnosti od mineraloškog oblika u kojem se materija nalazi.",
publisher = "Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet",
journal = "X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina",
title = "Polimorfne promene materije nastale mlevenjem minerala",
pages = "53-39"
}

Petrov, M., Andrić, L., Kostović, M., Jovanović, V., Radulović, D., Todorović, D.,& Ivošević, B.. (2023). Polimorfne promene materije nastale mlevenjem minerala. in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina
Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet., 39-53.

Petrov M, Andrić L, Kostović M, Jovanović V, Radulović D, Todorović D, Ivošević B. Polimorfne promene materije nastale mlevenjem minerala. in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina. 2023;:39-53..

Petrov, Milan, Andrić, Ljubiša, Kostović, Milena, Jovanović, Vladimir, Radulović, Dragan, Todorović, Dejan, Ivošević, Branislav, "Polimorfne promene materije nastale mlevenjem minerala" in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina (2023):39-53.

Radulović, D., Andrić, L., Petrov, M., Stojanović, J.,& Marković, B.. (2020). Tehnološka ispitivanja i naučno-stručna validacija rude iz ležišta „Kula“ u cilju proširenja eksploatacionog prostora i uvećanja rudnih rezervi Rudnika „Grot“-Kriva Feja (Vranje). 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Radulović D, Andrić L, Petrov M, Stojanović J, Marković B. Tehnološka ispitivanja i naučno-stručna validacija rude iz ležišta „Kula“ u cilju proširenja eksploatacionog prostora i uvećanja rudnih rezervi Rudnika „Grot“-Kriva Feja (Vranje). 2020;..

Radulović, Dragan, Andrić, Ljubiša, Petrov, Milan, Stojanović, Jovica, Marković, Branislav, "Tehnološka ispitivanja i naučno-stručna validacija rude iz ležišta „Kula“ u cilju proširenja eksploatacionog prostora i uvećanja rudnih rezervi Rudnika „Grot“-Kriva Feja (Vranje)" (2020).

TY  - CONF
AU  - Radulović, Dragan
AU  - Jovanović, Vladimir
AU  - Andrić, Ljubiša
AU  - Petrov, Milan
AU  - Todorović, Dejan
AU  - Blagojev, Marina
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1108
AB  - U ovom radu prikazani su rezulati određivanja Bondovog radnog indexa krečnjaka iz postrojenja za preradu krečnjaka “Carmeuse”- Ševarlije-Doboj. Bondov radni index je određivan na klasi krupnoće - 22+16mm, koja je jedan od proizvoda koji se dobija u postrojenju. Ova klasa je trebalo da predstavlja polaznu sirovinu za postupak mlevenja i proizvodnju punioca pa je stoga bilo bitno da se odredi Bondov radni index kao jedan od najvažnijih parametara usitnjavanja za bilo koju rudu.
PB  - Beograd : Privredna komora Srbije
C3  - 11. simpozijum sa međunarodnim učešćem "Rudarstvo 2020"
T1  - Uticaj krupnoće materijala u ulaznoj rudi i prozvodu mlevenja na vrednost bondovog radnog indeksa krečnjaka „Carmeuse“-Doboj
EP  - 54
SP  - 44
ER  - 

@conference{
author = "Radulović, Dragan and Jovanović, Vladimir and Andrić, Ljubiša and Petrov, Milan and Todorović, Dejan and Blagojev, Marina",
year = "2020",
abstract = "U ovom radu prikazani su rezulati određivanja Bondovog radnog indexa krečnjaka iz postrojenja za preradu krečnjaka “Carmeuse”- Ševarlije-Doboj. Bondov radni index je određivan na klasi krupnoće - 22+16mm, koja je jedan od proizvoda koji se dobija u postrojenju. Ova klasa je trebalo da predstavlja polaznu sirovinu za postupak mlevenja i proizvodnju punioca pa je stoga bilo bitno da se odredi Bondov radni index kao jedan od najvažnijih parametara usitnjavanja za bilo koju rudu.",
publisher = "Beograd : Privredna komora Srbije",
journal = "11. simpozijum sa međunarodnim učešćem "Rudarstvo 2020"",
title = "Uticaj krupnoće materijala u ulaznoj rudi i prozvodu mlevenja na vrednost bondovog radnog indeksa krečnjaka „Carmeuse“-Doboj",
pages = "54-44"
}

Radulović, D., Jovanović, V., Andrić, L., Petrov, M., Todorović, D.,& Blagojev, M.. (2020). Uticaj krupnoće materijala u ulaznoj rudi i prozvodu mlevenja na vrednost bondovog radnog indeksa krečnjaka „Carmeuse“-Doboj. in 11. simpozijum sa međunarodnim učešćem "Rudarstvo 2020"
Beograd : Privredna komora Srbije., 44-54.

Radulović D, Jovanović V, Andrić L, Petrov M, Todorović D, Blagojev M. Uticaj krupnoće materijala u ulaznoj rudi i prozvodu mlevenja na vrednost bondovog radnog indeksa krečnjaka „Carmeuse“-Doboj. in 11. simpozijum sa međunarodnim učešćem "Rudarstvo 2020". 2020;:44-54..

Radulović, Dragan, Jovanović, Vladimir, Andrić, Ljubiša, Petrov, Milan, Todorović, Dejan, Blagojev, Marina, "Uticaj krupnoće materijala u ulaznoj rudi i prozvodu mlevenja na vrednost bondovog radnog indeksa krečnjaka „Carmeuse“-Doboj" in 11. simpozijum sa međunarodnim učešćem "Rudarstvo 2020" (2020):44-54.

TY  - CONF
AU  - Dojčinović, Marina
AU  - Grigorov, Irena
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1155
AB  - Mikrolegirani čelici se primenjuju za izradu različitih elemenata opreme u metalurgiji i rudarstvu. Zbog zahteva koje oprema treba da ispuni i sigurnosti koju treba da obezbedi, vrše se različita ispitivanja ove vrste konstrukcionih materijala. U radu je ispitivano ponašanje mikrolegiranog čelika S355M u uslovima dejstva kavitacije. Za ispitivanje je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćena je promena mase uzoraka u funkciji vremena dejstva kavitacije. Morfologija oštećenja površine analizirana je primenom skenirajuće elektronske mikroskopije. Utvrđen je mehanizam nastajanja i razvoja oštećenja površine uzoraka pod dejstvom kavitacije. Procenjena je mogućnost primene ove vrste materijala u rigoroznim uslovima eksploatacije koji su prisutni u metalurškim procesima.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020
T1  - Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije
EP  - 249
SP  - 244
ER  - 

@conference{
author = "Dojčinović, Marina and Grigorov, Irena and Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2020",
abstract = "Mikrolegirani čelici se primenjuju za izradu različitih elemenata opreme u metalurgiji i rudarstvu. Zbog zahteva koje oprema treba da ispuni i sigurnosti koju treba da obezbedi, vrše se različita ispitivanja ove vrste konstrukcionih materijala. U radu je ispitivano ponašanje mikrolegiranog čelika S355M u uslovima dejstva kavitacije. Za ispitivanje je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćena je promena mase uzoraka u funkciji vremena dejstva kavitacije. Morfologija oštećenja površine analizirana je primenom skenirajuće elektronske mikroskopije. Utvrđen je mehanizam nastajanja i razvoja oštećenja površine uzoraka pod dejstvom kavitacije. Procenjena je mogućnost primene ove vrste materijala u rigoroznim uslovima eksploatacije koji su prisutni u metalurškim procesima.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020",
title = "Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije",
pages = "249-244"
}

Dojčinović, M., Grigorov, I., Pavlović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2020). Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 244-249.

Dojčinović M, Grigorov I, Pavlović M, Andrić L, Radulović D, Petrov M. Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020. 2020;:244-249..

Dojčinović, Marina, Grigorov, Irena, Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije" in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020 (2020):244-249.

TY  - CONF
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Dojčinović, Marina
AU  - Grigorov, Irena
AU  - Tanasković, Zorica
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1148
AB  - U radu je ispitivana mogućnost primene bazalta iz ležišta Vrelo - Kopaonik, za dobijanje proizvoda staklo-keramike poboljšanih svojstava za primenu u proizvodnji konstrukcionih elemenata opreme u metalurgiji i rudarstvu. Jedan od ciljeva bio je i proširenje primene ispitivanih keramičkih materijala u inženjerskoj praksi kao zamena za metalne materijale. Istraženi su postupci prečišćavanja, mlevenja I mehaničke aktivacije bazaltnog agregata, postupci sinteze uzoraka procesima presovanja I sinterovanja, kao i procesi topljenja, livenja i termičkog tretmana. S obzirom na rigorozne uslove eksploatacije u metalurškim i rudarskim procesima u cilju ispitivanja kvaliteta i izbora materijala primenjeno je više metoda karakterizacije -rendgenska difrakciona analiza, optička i skenirajuća elektronska mikroskopija, ultrazvučna vibraciona metoda sa stacionarnim uzorkom, kompjuterska analiza slike. Dobra tehnička svojstva čini bazalt važnom sirovinom za primenu u različitim granama industrije. U radu su prikazani i rezultati istraživanja primene bazalta za izradu vatrostalnih premaza za zaštitu metalnih i nemetalnih konstrukcija, kao i ispitivanje primene ojačivača na bazi bazalta u kompozitima tipa polimerna osnova/bazaltni prah za specifične uslove primenu u mašinstvu I građevinarstvu. Srbija raspolaže kvalitetnim bazaltom (stenama bazalta) za istraživanja sinteze novih materijala i široku primenu u industriji. Primena ove vrste sirovina može da doprinese poboljšanju ekonomskih, energetskih i ekoloških aspekata poslovanja metalurških i rudarskih pogona, kao i pogona za reciklažu otpada.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020
T1  - Mogućnost razvoja tehnologije prerade bazalta
EP  - 84
SP  - 78
ER  - 

@conference{
author = "Pavlović, Marko and Andrić, Ljubiša and Dojčinović, Marina and Grigorov, Irena and Tanasković, Zorica and Radulović, Dragan and Petrov, Milan",
year = "2020",
abstract = "U radu je ispitivana mogućnost primene bazalta iz ležišta Vrelo - Kopaonik, za dobijanje proizvoda staklo-keramike poboljšanih svojstava za primenu u proizvodnji konstrukcionih elemenata opreme u metalurgiji i rudarstvu. Jedan od ciljeva bio je i proširenje primene ispitivanih keramičkih materijala u inženjerskoj praksi kao zamena za metalne materijale. Istraženi su postupci prečišćavanja, mlevenja I mehaničke aktivacije bazaltnog agregata, postupci sinteze uzoraka procesima presovanja I sinterovanja, kao i procesi topljenja, livenja i termičkog tretmana. S obzirom na rigorozne uslove eksploatacije u metalurškim i rudarskim procesima u cilju ispitivanja kvaliteta i izbora materijala primenjeno je više metoda karakterizacije -rendgenska difrakciona analiza, optička i skenirajuća elektronska mikroskopija, ultrazvučna vibraciona metoda sa stacionarnim uzorkom, kompjuterska analiza slike. Dobra tehnička svojstva čini bazalt važnom sirovinom za primenu u različitim granama industrije. U radu su prikazani i rezultati istraživanja primene bazalta za izradu vatrostalnih premaza za zaštitu metalnih i nemetalnih konstrukcija, kao i ispitivanje primene ojačivača na bazi bazalta u kompozitima tipa polimerna osnova/bazaltni prah za specifične uslove primenu u mašinstvu I građevinarstvu. Srbija raspolaže kvalitetnim bazaltom (stenama bazalta) za istraživanja sinteze novih materijala i široku primenu u industriji. Primena ove vrste sirovina može da doprinese poboljšanju ekonomskih, energetskih i ekoloških aspekata poslovanja metalurških i rudarskih pogona, kao i pogona za reciklažu otpada.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020",
title = "Mogućnost razvoja tehnologije prerade bazalta",
pages = "84-78"
}

Pavlović, M., Andrić, L., Dojčinović, M., Grigorov, I., Tanasković, Z., Radulović, D.,& Petrov, M.. (2020). Mogućnost razvoja tehnologije prerade bazalta. in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 78-84.

Pavlović M, Andrić L, Dojčinović M, Grigorov I, Tanasković Z, Radulović D, Petrov M. Mogućnost razvoja tehnologije prerade bazalta. in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020. 2020;:78-84..

Pavlović, Marko, Andrić, Ljubiša, Dojčinović, Marina, Grigorov, Irena, Tanasković, Zorica, Radulović, Dragan, Petrov, Milan, "Mogućnost razvoja tehnologije prerade bazalta" in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020 (2020):78-84.

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Petrov, Milan
AU  - Tanasković, Zorica
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1157
AB  - U radu je istraživano dobijanje vatrostalnih punioca na bazi različitih mineralnih sirovina, a pre svega pirofilita, mulita, kordijerita i cirkona. U cilju dobijanja vatrostalnih punioca visokih svojstava I primene u sintezi novih oblikovanih i neoblikovanih vatrostalnih materijala, vršena su sistematična istraživanja procesa pripreme mineralnih sirovina postupcima prečišćavanja, mlevenja i mehaničke aktivacije. Mlevenje i mehanička aktivacija punioca vršena je u visokoenergetskim mlinovima sa polazne veličine zrna 100μm do veličine zrna 15 μm. Posebna pažnja tokom istraživanja posvećena je ispitivanju uticaja mehaničke akrivacije punioca na reološka svojstva dobijenih vatrostalnih premaza za primenu u livarstvu. Karakterizacija dobijenih punioca vršena je primenom rendgenske difrakcione analize i skenirajuće elektronske mikroskopije, a kvalitativna mineraloška analiza i analiza oblika I veličine zrna punioca urađena je pod polarizacionim mikroskopom primenom imerzione metode I kompjuterskog programskog paketa Ozaria 2.5. Rezultati ispitivanja mogućnosti primene dobijenih vatrostalnih punioca za izradu livačkih premaza pokazali su da je veličina zrna punioca 15-20μm optimalana za postizanje zadovoljavajuće reologije primene premaza. Zadovoljavajuća svojstva premaza postignuta su primenom optimalnih sastava premaza i procesa njihove izrade.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''
T1  - Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona
EP  - 243
SP  - 238
ER  - 

@conference{
author = "Andrić, Ljubiša and Radulović, Dragan and Pavlović, Marko and Dojčinović, Marina and Petrov, Milan and Tanasković, Zorica",
year = "2020",
abstract = "U radu je istraživano dobijanje vatrostalnih punioca na bazi različitih mineralnih sirovina, a pre svega pirofilita, mulita, kordijerita i cirkona. U cilju dobijanja vatrostalnih punioca visokih svojstava I primene u sintezi novih oblikovanih i neoblikovanih vatrostalnih materijala, vršena su sistematična istraživanja procesa pripreme mineralnih sirovina postupcima prečišćavanja, mlevenja i mehaničke aktivacije. Mlevenje i mehanička aktivacija punioca vršena je u visokoenergetskim mlinovima sa polazne veličine zrna 100μm do veličine zrna 15 μm. Posebna pažnja tokom istraživanja posvećena je ispitivanju uticaja mehaničke akrivacije punioca na reološka svojstva dobijenih vatrostalnih premaza za primenu u livarstvu. Karakterizacija dobijenih punioca vršena je primenom rendgenske difrakcione analize i skenirajuće elektronske mikroskopije, a kvalitativna mineraloška analiza i analiza oblika I veličine zrna punioca urađena je pod polarizacionim mikroskopom primenom imerzione metode I kompjuterskog programskog paketa Ozaria 2.5. Rezultati ispitivanja mogućnosti primene dobijenih vatrostalnih punioca za izradu livačkih premaza pokazali su da je veličina zrna punioca 15-20μm optimalana za postizanje zadovoljavajuće reologije primene premaza. Zadovoljavajuća svojstva premaza postignuta su primenom optimalnih sastava premaza i procesa njihove izrade.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''",
title = "Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona",
pages = "243-238"
}

Andrić, L., Radulović, D., Pavlović, M., Dojčinović, M., Petrov, M.,& Tanasković, Z.. (2020). Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 238-243.

Andrić L, Radulović D, Pavlović M, Dojčinović M, Petrov M, Tanasković Z. Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''. 2020;:238-243..

Andrić, Ljubiša, Radulović, Dragan, Pavlović, Marko, Dojčinović, Marina, Petrov, Milan, Tanasković, Zorica, "Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona" in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020'' (2020):238-243.

TY  - JOUR
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Pavlović, Marko
AU  - Petrov, Milan
AU  - Stojanović, Jovica
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/552
AB  - U radu su istraživani postupci pripreme punioca na bazi pirofilita za dobijanje vatrostalnih premaza sa kontrolisanim reološkim svojstvima. Polazni uzorci pirofilita dobijeni su iz ležišta Parsović-BiH. Istraživan je uticaj procesa mikronizirajućeg mlevenja na promenu svojstava vatrostalnog punioca, promenu veličine i oblika zrna punioca, disperznost i stabilnost suspenzije premaza. Za karakterizaciju dobijenih punioca korišćene su metode XRD, SEM i optička mikroskopija. U drugoj fazi istraživanja punioci su podvrgnuti procesu mikronizirajućeg mlevenja u mlinu sa keramičkim kuglama. Gornja granica krupnoće ulaznog materijala bila je 100% -2,00 mm. Vremena mikronizirajućeg mlevenja (min): 15; 20;25. Cilj je bio optimizacija svojstava punioca na bazi pirofilita, definisanje sastava premaza i postupaka njihove izrade. Kvalitet dobijenih premaza kontrolisan je u skladu sa standardom za ovu vrstu vatrostalnih proizvoda.
AB  - The paper investigates the procedures for the preparation of fillers based on pyrophyllite for obtaining refractory coatings with controlled rheological properties. Starting samples of pyrophyllite were obtained from the Parsović-B&H deposit. The influence of the micronizing ginding process on the change in the properties of the refractory filler, the change in the size and shape of filler grain, the dispersion and stability of the coating suspension was investigation. To characterize the obtained fillers XRD, SEM and optical microscopy were used. In the second phase of the research, the fillers were subjected to the process of micronizing grinding in the mill with ceramic balls. The upper limit of the size of the input material was 100% -2,00 mm. Micronizing grinding time (min): 15; 20; 25. The aim was to optimize the properties of fillers based on pyrophyllite, to define the composition of coatings and the procedures for their production. The quality of the obtained coatings was controlled in accordance with the standard for this type of refractory products.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Mogućnost primene pirofilita kao punioca u vatrostalnim premazima
T1  - Possibility of applying pyrophylite as filler in refractory coatings
EP  - 219
IS  - 3
SP  - 210
VL  - 61
DO  - 10.5937/zasmat2003210A
UR  - conv_161
ER  - 

@article{
author = "Andrić, Ljubiša and Radulović, Dragan and Pavlović, Marko and Petrov, Milan and Stojanović, Jovica",
year = "2020",
abstract = "U radu su istraživani postupci pripreme punioca na bazi pirofilita za dobijanje vatrostalnih premaza sa kontrolisanim reološkim svojstvima. Polazni uzorci pirofilita dobijeni su iz ležišta Parsović-BiH. Istraživan je uticaj procesa mikronizirajućeg mlevenja na promenu svojstava vatrostalnog punioca, promenu veličine i oblika zrna punioca, disperznost i stabilnost suspenzije premaza. Za karakterizaciju dobijenih punioca korišćene su metode XRD, SEM i optička mikroskopija. U drugoj fazi istraživanja punioci su podvrgnuti procesu mikronizirajućeg mlevenja u mlinu sa keramičkim kuglama. Gornja granica krupnoće ulaznog materijala bila je 100% -2,00 mm. Vremena mikronizirajućeg mlevenja (min): 15; 20;25. Cilj je bio optimizacija svojstava punioca na bazi pirofilita, definisanje sastava premaza i postupaka njihove izrade. Kvalitet dobijenih premaza kontrolisan je u skladu sa standardom za ovu vrstu vatrostalnih proizvoda., The paper investigates the procedures for the preparation of fillers based on pyrophyllite for obtaining refractory coatings with controlled rheological properties. Starting samples of pyrophyllite were obtained from the Parsović-B&H deposit. The influence of the micronizing ginding process on the change in the properties of the refractory filler, the change in the size and shape of filler grain, the dispersion and stability of the coating suspension was investigation. To characterize the obtained fillers XRD, SEM and optical microscopy were used. In the second phase of the research, the fillers were subjected to the process of micronizing grinding in the mill with ceramic balls. The upper limit of the size of the input material was 100% -2,00 mm. Micronizing grinding time (min): 15; 20; 25. The aim was to optimize the properties of fillers based on pyrophyllite, to define the composition of coatings and the procedures for their production. The quality of the obtained coatings was controlled in accordance with the standard for this type of refractory products.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Mogućnost primene pirofilita kao punioca u vatrostalnim premazima, Possibility of applying pyrophylite as filler in refractory coatings",
pages = "219-210",
number = "3",
volume = "61",
doi = "10.5937/zasmat2003210A",
url = "conv_161"
}

Andrić, L., Radulović, D., Pavlović, M., Petrov, M.,& Stojanović, J.. (2020). Mogućnost primene pirofilita kao punioca u vatrostalnim premazima. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 61(3), 210-219.
https://doi.org/10.5937/zasmat2003210A
conv_161

Andrić L, Radulović D, Pavlović M, Petrov M, Stojanović J. Mogućnost primene pirofilita kao punioca u vatrostalnim premazima. in Zaštita materijala. 2020;61(3):210-219.
doi:10.5937/zasmat2003210A
conv_161 .

Andrić, Ljubiša, Radulović, Dragan, Pavlović, Marko, Petrov, Milan, Stojanović, Jovica, "Mogućnost primene pirofilita kao punioca u vatrostalnim premazima" in Zaštita materijala, 61, no. 3 (2020):210-219,
https://doi.org/10.5937/zasmat2003210A .,
conv_161 .

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Harbinja, Muhamed
AU  - Petrov, Milan
AU  - Marković, Marija
AU  - Stojanović, Jovica
AU  - Pavlović, Marko
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1158
AB  - Mikronizacija pirofilita je veliki tehnološko-tehnički problem, iz razloga što klasične mašine za usitnjavanje, ne mogu, svojim procesnim uslovima, da ga mikroniziraju do finog i posebno veoma finog granulometrijskog sastava, koji je neophodan za nove savremene domene industrijke primene. Iz ovih razloga, neophodno je dobro poznavanje njihovih fizičko-hemijskih, mineraloških, mehaničkih osobina, i posebno mehanizama procesa njihovog finog usitnjavanja (mikronizacije).Detaljnim istraživanjima kinetike mikronizirajućeg mlevenja pirofilita, dobijeni su elementi za određivanje efikasnosti rada vibracionih i ultra-centrifugalnih mlinova, a samim tim stečeni su uslovi za definisanje kako tehnoloških parametara mikronizacije, tako i parametara proizvoda mikronizacije. U isto vreme, na osnovu detaljne fizičko-hemijske, mineraloške i rentgenske karakterizacije mikroniziranih proizvoda pirofilita, uočene su određene fizičko-hemijske promene u njihovoj strukturi (prelaz pirofilita u amorfno stanje), što je sigurno posledica rada pomenutih mlinova.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”
T1  - Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)
EP  - 113
SP  - 103
ER  - 

@conference{
author = "Andrić, Ljubiša and Radulović, Dragan and Harbinja, Muhamed and Petrov, Milan and Marković, Marija and Stojanović, Jovica and Pavlović, Marko",
year = "2019",
abstract = "Mikronizacija pirofilita je veliki tehnološko-tehnički problem, iz razloga što klasične mašine za usitnjavanje, ne mogu, svojim procesnim uslovima, da ga mikroniziraju do finog i posebno veoma finog granulometrijskog sastava, koji je neophodan za nove savremene domene industrijke primene. Iz ovih razloga, neophodno je dobro poznavanje njihovih fizičko-hemijskih, mineraloških, mehaničkih osobina, i posebno mehanizama procesa njihovog finog usitnjavanja (mikronizacije).Detaljnim istraživanjima kinetike mikronizirajućeg mlevenja pirofilita, dobijeni su elementi za određivanje efikasnosti rada vibracionih i ultra-centrifugalnih mlinova, a samim tim stečeni su uslovi za definisanje kako tehnoloških parametara mikronizacije, tako i parametara proizvoda mikronizacije. U isto vreme, na osnovu detaljne fizičko-hemijske, mineraloške i rentgenske karakterizacije mikroniziranih proizvoda pirofilita, uočene su određene fizičko-hemijske promene u njihovoj strukturi (prelaz pirofilita u amorfno stanje), što je sigurno posledica rada pomenutih mlinova.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”",
title = "Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)",
pages = "113-103"
}

Andrić, L., Radulović, D., Harbinja, M., Petrov, M., Marković, M., Stojanović, J.,& Pavlović, M.. (2019). Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH). in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 103-113.

Andrić L, Radulović D, Harbinja M, Petrov M, Marković M, Stojanović J, Pavlović M. Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH). in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”. 2019;:103-113..

Andrić, Ljubiša, Radulović, Dragan, Harbinja, Muhamed, Petrov, Milan, Marković, Marija, Stojanović, Jovica, Pavlović, Marko, "Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)" in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019” (2019):103-113.

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1061
AB  - The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
T1  - Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy
EP  - 429
SP  - 423
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2019",
abstract = "The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling (XIII IMPRC) Conference",
title = "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy",
pages = "429-423"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2019). Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
Bor : University of Belgrade, Technical Faculty in Bor., 423-429.

Pavlović M, Dojčinović M, Andrić L, Radulović D, Petrov M. Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference. 2019;:423-429..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy" in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference (2019):423-429.

TY  - CONF
AU  - Radulović, Dragan
AU  - Đorđević, Dragan
AU  - Andrić, Ljubiša
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1083
AB  - U ovom radu prikazani su rezulati rada Rudnika-Grot. Pre svega su prikazani stanje, tehnologija I način rada na rudi olova i cinka koja se eksploatisala i prerađivala u prethodnom periodu. Prikazano je osnovno eksploataciono polje Rudnika Blagodat do 2018., geološke karakteristike ležišta, mineralni sastva i ostale fizičko-hemijske osobine rude. Osim toga u radu je prikazana tehnološka inovacija iz 2017. kojom je izmenjena šema tehnološkog postupka u pogonu za flotiranje olovo- cinkane rude Rudnika Grot. U okviru ovoga dati su svi tehnološki parametri, tehničko-tehnološki efekti izvedene inovacije, kao i postignute uštede u postupku flotiranja u pogonu.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - X Simpozijum sa međunarodnim učešćem -“Rudarstvo 2019”
T1  - Izmene Tehnološkog Postupka Flotacijske Koncentracije Pb-Zn Rude "Rudnika –Grot A.D." (Blagodat)- Kriva Feja (Vranje)
EP  - 48
SP  - 36
ER  - 

@conference{
author = "Radulović, Dragan and Đorđević, Dragan and Andrić, Ljubiša and Petrov, Milan",
year = "2019",
abstract = "U ovom radu prikazani su rezulati rada Rudnika-Grot. Pre svega su prikazani stanje, tehnologija I način rada na rudi olova i cinka koja se eksploatisala i prerađivala u prethodnom periodu. Prikazano je osnovno eksploataciono polje Rudnika Blagodat do 2018., geološke karakteristike ležišta, mineralni sastva i ostale fizičko-hemijske osobine rude. Osim toga u radu je prikazana tehnološka inovacija iz 2017. kojom je izmenjena šema tehnološkog postupka u pogonu za flotiranje olovo- cinkane rude Rudnika Grot. U okviru ovoga dati su svi tehnološki parametri, tehničko-tehnološki efekti izvedene inovacije, kao i postignute uštede u postupku flotiranja u pogonu.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "X Simpozijum sa međunarodnim učešćem -“Rudarstvo 2019”",
title = "Izmene Tehnološkog Postupka Flotacijske Koncentracije Pb-Zn Rude "Rudnika –Grot A.D." (Blagodat)- Kriva Feja (Vranje)",
pages = "48-36"
}

Radulović, D., Đorđević, D., Andrić, L.,& Petrov, M.. (2019). Izmene Tehnološkog Postupka Flotacijske Koncentracije Pb-Zn Rude "Rudnika –Grot A.D." (Blagodat)- Kriva Feja (Vranje). in X Simpozijum sa međunarodnim učešćem -“Rudarstvo 2019”
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 36-48.

Radulović D, Đorđević D, Andrić L, Petrov M. Izmene Tehnološkog Postupka Flotacijske Koncentracije Pb-Zn Rude "Rudnika –Grot A.D." (Blagodat)- Kriva Feja (Vranje). in X Simpozijum sa međunarodnim učešćem -“Rudarstvo 2019”. 2019;:36-48..

Radulović, Dragan, Đorđević, Dragan, Andrić, Ljubiša, Petrov, Milan, "Izmene Tehnološkog Postupka Flotacijske Koncentracije Pb-Zn Rude "Rudnika –Grot A.D." (Blagodat)- Kriva Feja (Vranje)" in X Simpozijum sa međunarodnim učešćem -“Rudarstvo 2019” (2019):36-48.

TY  - CONF
AU  - Radulović, Dragan
AU  - Andrić, Ljubiša
AU  - Petrov, Milan
AU  - Božović, Darko
AU  - Pavlović, Marko
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1043
AB  - Paper presents results of investigations of the possibility of using “Brijeg”-Ulcinj limestone as filler in various industries. Micronization, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses were performed. Physico-chemical properties of this sample classify it among high quality carbonate raw materials with high CaCO3 content of 98.21%, with low contents of MgCO3 0.88 % and SiO2 0.16 %. Its quality satisfies requirements of standards on using of calcium carbonate as filler in next industries: paints and coatings; rubber and PVC; glass; foundry ; sugar industry production of mineral fertilizers and metallurgy.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
T1  - Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries
EP  - 126
SP  - 119
ER  - 

@conference{
author = "Radulović, Dragan and Andrić, Ljubiša and Petrov, Milan and Božović, Darko and Pavlović, Marko",
year = "2019",
abstract = "Paper presents results of investigations of the possibility of using “Brijeg”-Ulcinj limestone as filler in various industries. Micronization, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses were performed. Physico-chemical properties of this sample classify it among high quality carbonate raw materials with high CaCO3 content of 98.21%, with low contents of MgCO3 0.88 % and SiO2 0.16 %. Its quality satisfies requirements of standards on using of calcium carbonate as filler in next industries: paints and coatings; rubber and PVC; glass; foundry ; sugar industry production of mineral fertilizers and metallurgy.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling (XIII IMPRC) Conference",
title = "Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries",
pages = "126-119"
}

Radulović, D., Andrić, L., Petrov, M., Božović, D.,& Pavlović, M.. (2019). Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
Bor : University of Belgrade, Technical Faculty in Bor., 119-126.

Radulović D, Andrić L, Petrov M, Božović D, Pavlović M. Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference. 2019;:119-126..

Radulović, Dragan, Andrić, Ljubiša, Petrov, Milan, Božović, Darko, Pavlović, Marko, "Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries" in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference (2019):119-126.

TY  - JOUR
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Drmanić, Saša
AU  - Đorđević, Nataša
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/488
AB  - For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings
EP  - 25
IS  - 1
SP  - 15
VL  - 51
DO  - 10.2298/SOS1901015P
UR  - conv_864
ER  - 

@article{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Drmanić, Saša and Đorđević, Nataša and Petrov, Milan",
year = "2019",
abstract = "For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings",
pages = "25-15",
number = "1",
volume = "51",
doi = "10.2298/SOS1901015P",
url = "conv_864"
}

Pavlović, M., Andrić, L., Radulović, D., Drmanić, S., Đorđević, N.,& Petrov, M.. (2019). Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 51(1), 15-25.
https://doi.org/10.2298/SOS1901015P
conv_864

Pavlović M, Andrić L, Radulović D, Drmanić S, Đorđević N, Petrov M. Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering. 2019;51(1):15-25.
doi:10.2298/SOS1901015P
conv_864 .

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Drmanić, Saša, Đorđević, Nataša, Petrov, Milan, "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings" in Science of Sintering, 51, no. 1 (2019):15-25,
https://doi.org/10.2298/SOS1901015P .,
conv_864 .

Trumić, M., Trumić, M., Radulović, D., Terzić, A., Andrić, L.,& Petrov, M.. (2018). Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje. 
Bor : University of Belgrade, Technical Faculty in Bor..

Trumić M, Trumić M, Radulović D, Terzić A, Andrić L, Petrov M. Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje. 2018;..

Trumić, Milan, Trumić, Maja, Radulović, Dragan, Terzić, Anja, Andrić, Ljubiša, Petrov, Milan, "Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje" (2018).

Radulović, D., Andrić, L., Terzić, A., Petrov, M., Stojanović, J., Trumić, M.,& Trumić, M.. (2018). Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Radulović D, Andrić L, Terzić A, Petrov M, Stojanović J, Trumić M, Trumić M. Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot. 2018;..

Radulović, Dragan, Andrić, Ljubiša, Terzić, Anja, Petrov, Milan, Stojanović, Jovica, Trumić, Milan, Trumić, Maja, "Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot" (2018).

Radulović, D., Andrić, L., Terzić, A., Stojanović, J., Marković, M.,& Petrov, M.. (2018). Definisanje uslova razdvajanja (separacije), posle mlevenja, u mineralnom sistemu pirofilita-kvarca u zasebne proizvode, ležišta „Parsović“ – Konjic (BiH). 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Radulović D, Andrić L, Terzić A, Stojanović J, Marković M, Petrov M. Definisanje uslova razdvajanja (separacije), posle mlevenja, u mineralnom sistemu pirofilita-kvarca u zasebne proizvode, ležišta „Parsović“ – Konjic (BiH). 2018;..

Radulović, Dragan, Andrić, Ljubiša, Terzić, Anja, Stojanović, Jovica, Marković, Marija, Petrov, Milan, "Definisanje uslova razdvajanja (separacije), posle mlevenja, u mineralnom sistemu pirofilita-kvarca u zasebne proizvode, ležišta „Parsović“ – Konjic (BiH)" (2018).

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Blagojev, Marina
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1060
AB  - This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
PB  - Bor : Mining and Metallurgy Institute Bor
C3  - 50th International October Conference on Mining and Metallurgy
T1  - Influence of the basalt structure and properties on development the cavitation damage
EP  - 158
SP  - 155
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Stojanović, Jovica and Radulović, Dragan and Petrov, Milan and Blagojev, Marina",
year = "2018",
abstract = "This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor, Bor : Mining and Metallurgy Institute Bor",
journal = "50th International October Conference on Mining and Metallurgy",
title = "Influence of the basalt structure and properties on development the cavitation damage",
pages = "158-155"
}

Pavlović, M., Dojčinović, M., Andrić, L., Stojanović, J., Radulović, D., Petrov, M.,& Blagojev, M.. (2018). Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 155-158.

Pavlović M, Dojčinović M, Andrić L, Stojanović J, Radulović D, Petrov M, Blagojev M. Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy. 2018;:155-158..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Stojanović, Jovica, Radulović, Dragan, Petrov, Milan, Blagojev, Marina, "Influence of the basalt structure and properties on development the cavitation damage" in 50th International October Conference on Mining and Metallurgy (2018):155-158.

TY  - CONF
AU  - Sokić, Miroslav
AU  - Petrov, Milan
AU  - Matković, Vladislav
AU  - Andrić, Ljubiša
AU  - Manojlović, Vaso
AU  - Marković, Branislav
AU  - Stojanović, Jovica
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/970
AB  - Mechanochemical and thermal treatment of metal oxides (Chromium, Cobalt, Zinc,
Titanium, Magnesium, and Aluminum oxides) results in the formation of compound spinel with
a formula Co0.51Zn0.29Mg0.41Cr1.24Al0.24Ti0.31O4 - used as masking pigment. Such treatment of
metallic oxides initiates a complex series of transformation using mechanical energy disturbing
the arrangement of the crystal and molecular structure, as chemical and thermodynamic balance.
With optical and scanning electron microscopy with EDX analysis. X-ray and chemical analysis
of the resulting spinel - the quality, structure, grain size and color of the obtained spinel were
determined. Also, the reaction surfaces, the resulting phase transformations, and the degree of
formed dislocations and defects in the crystal lattice of the obtained spinel were determined. By
the obtained results, the optimal conditions of the mechanochemical process have been designed,
which involve the design the vibration mill (geometry, ceramic balls, and other), grinding time,
the temperature in the mill, and rpm of the mill.
PB  - Macedonian union of Metallurgists
C3  - VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT”
T1  - Compound spinel as a masking pigment obtained by mechanochemical treatment
EP  - 34
SP  - 34
ER  - 

@conference{
author = "Sokić, Miroslav and Petrov, Milan and Matković, Vladislav and Andrić, Ljubiša and Manojlović, Vaso and Marković, Branislav and Stojanović, Jovica",
year = "2018",
abstract = "Mechanochemical and thermal treatment of metal oxides (Chromium, Cobalt, Zinc,
Titanium, Magnesium, and Aluminum oxides) results in the formation of compound spinel with
a formula Co0.51Zn0.29Mg0.41Cr1.24Al0.24Ti0.31O4 - used as masking pigment. Such treatment of
metallic oxides initiates a complex series of transformation using mechanical energy disturbing
the arrangement of the crystal and molecular structure, as chemical and thermodynamic balance.
With optical and scanning electron microscopy with EDX analysis. X-ray and chemical analysis
of the resulting spinel - the quality, structure, grain size and color of the obtained spinel were
determined. Also, the reaction surfaces, the resulting phase transformations, and the degree of
formed dislocations and defects in the crystal lattice of the obtained spinel were determined. By
the obtained results, the optimal conditions of the mechanochemical process have been designed,
which involve the design the vibration mill (geometry, ceramic balls, and other), grinding time,
the temperature in the mill, and rpm of the mill.",
publisher = "Macedonian union of Metallurgists",
journal = "VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT”",
title = "Compound spinel as a masking pigment obtained by mechanochemical treatment",
pages = "34-34"
}

Sokić, M., Petrov, M., Matković, V., Andrić, L., Manojlović, V., Marković, B.,& Stojanović, J.. (2018). Compound spinel as a masking pigment obtained by mechanochemical treatment. in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT”
Macedonian union of Metallurgists., 34-34.

Sokić M, Petrov M, Matković V, Andrić L, Manojlović V, Marković B, Stojanović J. Compound spinel as a masking pigment obtained by mechanochemical treatment. in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT”. 2018;:34-34..

Sokić, Miroslav, Petrov, Milan, Matković, Vladislav, Andrić, Ljubiša, Manojlović, Vaso, Marković, Branislav, Stojanović, Jovica, "Compound spinel as a masking pigment obtained by mechanochemical treatment" in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT” (2018):34-34.

TY  - CONF
AU  - Petrov, Milan
AU  - Radulović, Dragan
AU  - Andrić, Ljubiša
AU  - Blagojev, Marina
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1068
AB  - Hydrogen is considered to be be the fuel of the future. Fuel cells allow that the change of Gibbs function can provide maximum electrical work. Activation with mechanochemical treatment of mineral matter represents a technology that enables us to get fuel with high heat of combustion. The hydrogen generator represents a mechanochemical reactor or a mill with balls in whose operating cylinder is the metal creator in view of grinding bodies, water and abrasive. It is interesting to notice the fact that we calculated the work of the mill (reactor) in the dimension A(=) Jmol-1. It is also important the fact that one of the balls in a mill (reactor) mass m = 6.5 g, in the process of MH treatment, with its operation on the mineral grain size d = 100 um creates the pressure of 0.65 MPa.
PB  - Belgrade : University of Belgrade, Vinča Institute of Nuclear Sciences
C3  - 3rd International Symposium on Materials for Energy Storage and Conversion- mESC- IS 2018
T1  - Hydrogen genaration in mechanocemical reactor
ER  - 

@conference{
author = "Petrov, Milan and Radulović, Dragan and Andrić, Ljubiša and Blagojev, Marina",
year = "2018",
abstract = "Hydrogen is considered to be be the fuel of the future. Fuel cells allow that the change of Gibbs function can provide maximum electrical work. Activation with mechanochemical treatment of mineral matter represents a technology that enables us to get fuel with high heat of combustion. The hydrogen generator represents a mechanochemical reactor or a mill with balls in whose operating cylinder is the metal creator in view of grinding bodies, water and abrasive. It is interesting to notice the fact that we calculated the work of the mill (reactor) in the dimension A(=) Jmol-1. It is also important the fact that one of the balls in a mill (reactor) mass m = 6.5 g, in the process of MH treatment, with its operation on the mineral grain size d = 100 um creates the pressure of 0.65 MPa.",
publisher = "Belgrade : University of Belgrade, Vinča Institute of Nuclear Sciences",
journal = "3rd International Symposium on Materials for Energy Storage and Conversion- mESC- IS 2018",
title = "Hydrogen genaration in mechanocemical reactor"
}

Petrov, M., Radulović, D., Andrić, L.,& Blagojev, M.. (2018). Hydrogen genaration in mechanocemical reactor. in 3rd International Symposium on Materials for Energy Storage and Conversion- mESC- IS 2018
Belgrade : University of Belgrade, Vinča Institute of Nuclear Sciences..

Petrov M, Radulović D, Andrić L, Blagojev M. Hydrogen genaration in mechanocemical reactor. in 3rd International Symposium on Materials for Energy Storage and Conversion- mESC- IS 2018. 2018;..

Petrov, Milan, Radulović, Dragan, Andrić, Ljubiša, Blagojev, Marina, "Hydrogen genaration in mechanocemical reactor" in 3rd International Symposium on Materials for Energy Storage and Conversion- mESC- IS 2018 (2018).

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1069
AB  - U Srbiji radi oko 200 rudnika u eksploataciji nemetaličnih mineralnih sirovina. Nemetalične mineralne sirovine su zastupljene u svim područjima Srbije i zauzimaju značajno mesto u privrednom razvoju, bilo da služe kao finalni proizvodi ili kao sirovine kod proizvodnje u prerađivačkoj i drugim industrijskim granama. Po raspoloživim količinama, kao i raznovrsnosti, ove sirovine su jedan od najznačajnijih domaćih prirodnih resursa. Skoro da ne postoje privredne grane koje ne koriste nemetalične mineralne sirovine.
 Osnovni cilj ovog referata je da se kroz sintezu raspoloživih podataka i dosadašnjih saznanja prikaže dostignuti nivo i potencijalne mogućnosti domaćih ležišta nemetaličnih mineralnih sirovina. Takođe, osnovni cilj je, da se sa raspoloživim podacima korišćenim u ovom tekstu dokumentuje određena zapostavljenost sirovinske baze nemetaličnih mineralnih sirovina u privrednom razvoju Srbije.
PB  - Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet
C3  - IX Kolokvijum o pripremi mineralnih sirovina
T1  - Nemetalične mineralne sirovine kao osnov dugoročnog razvoja privrede Srbije
EP  - 92
SP  - 50
ER  - 

@conference{
author = "Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2018",
abstract = "U Srbiji radi oko 200 rudnika u eksploataciji nemetaličnih mineralnih sirovina. Nemetalične mineralne sirovine su zastupljene u svim područjima Srbije i zauzimaju značajno mesto u privrednom razvoju, bilo da služe kao finalni proizvodi ili kao sirovine kod proizvodnje u prerađivačkoj i drugim industrijskim granama. Po raspoloživim količinama, kao i raznovrsnosti, ove sirovine su jedan od najznačajnijih domaćih prirodnih resursa. Skoro da ne postoje privredne grane koje ne koriste nemetalične mineralne sirovine.
 Osnovni cilj ovog referata je da se kroz sintezu raspoloživih podataka i dosadašnjih saznanja prikaže dostignuti nivo i potencijalne mogućnosti domaćih ležišta nemetaličnih mineralnih sirovina. Takođe, osnovni cilj je, da se sa raspoloživim podacima korišćenim u ovom tekstu dokumentuje određena zapostavljenost sirovinske baze nemetaličnih mineralnih sirovina u privrednom razvoju Srbije.",
publisher = "Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet",
journal = "IX Kolokvijum o pripremi mineralnih sirovina",
title = "Nemetalične mineralne sirovine kao osnov dugoročnog razvoja privrede Srbije",
pages = "92-50"
}

Andrić, L., Radulović, D.,& Petrov, M.. (2018). Nemetalične mineralne sirovine kao osnov dugoročnog razvoja privrede Srbije. in IX Kolokvijum o pripremi mineralnih sirovina
Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet., 50-92.

Andrić L, Radulović D, Petrov M. Nemetalične mineralne sirovine kao osnov dugoročnog razvoja privrede Srbije. in IX Kolokvijum o pripremi mineralnih sirovina. 2018;:50-92..

Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Nemetalične mineralne sirovine kao osnov dugoročnog razvoja privrede Srbije" in IX Kolokvijum o pripremi mineralnih sirovina (2018):50-92.

TY  - CONF
AU  - Sokić, Miroslav
AU  - Petrov, Milan
AU  - Matković, Vladislav
AU  - Andrić, Ljubiša
AU  - Manojlović, Vaso
AU  - Marković, Branislav
AU  - Stojanović, Jovica
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/677
AB  - Mechanochemical and thermal treatment of metal oxides (Chromium, Cobalt, Zinc,
Titanium, Magnesium, and Aluminum oxides) results in the formation of compound spinel with
a formula Co0.51Zn0.29Mg0.41Cr1.24Al0.24Ti0.31O4 - used as masking pigment. Such treatment of
metallic oxides initiates a complex series of transformation using mechanical energy disturbing
the arrangement of the crystal and molecular structure, as chemical and thermodynamic balance.
With optical and scanning electron microscopy with EDX analysis. X-ray and chemical analysis
of the resulting spinel - the quality, structure, grain size and color of the obtained spinel were
determined. Also, the reaction surfaces, the resulting phase transformations, and the degree of
formed dislocations and defects in the crystal lattice of the obtained spinel were determined. By
the obtained results, the optimal conditions of the mechanochemical process have been designed,
which involve the design the vibration mill (geometry, ceramic balls, and other), grinding time,
the temperature in the mill, and rpm of the mill.
PB  - Macedonian union of Metallurgists
C3  - VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT"
T1  - Compound spinel as a masking pigment obtained by mechanochemical treatment
EP  - 34
SP  - 34
ER  - 

@conference{
author = "Sokić, Miroslav and Petrov, Milan and Matković, Vladislav and Andrić, Ljubiša and Manojlović, Vaso and Marković, Branislav and Stojanović, Jovica",
year = "2018",
abstract = "Mechanochemical and thermal treatment of metal oxides (Chromium, Cobalt, Zinc,
Titanium, Magnesium, and Aluminum oxides) results in the formation of compound spinel with
a formula Co0.51Zn0.29Mg0.41Cr1.24Al0.24Ti0.31O4 - used as masking pigment. Such treatment of
metallic oxides initiates a complex series of transformation using mechanical energy disturbing
the arrangement of the crystal and molecular structure, as chemical and thermodynamic balance.
With optical and scanning electron microscopy with EDX analysis. X-ray and chemical analysis
of the resulting spinel - the quality, structure, grain size and color of the obtained spinel were
determined. Also, the reaction surfaces, the resulting phase transformations, and the degree of
formed dislocations and defects in the crystal lattice of the obtained spinel were determined. By
the obtained results, the optimal conditions of the mechanochemical process have been designed,
which involve the design the vibration mill (geometry, ceramic balls, and other), grinding time,
the temperature in the mill, and rpm of the mill.",
publisher = "Macedonian union of Metallurgists",
journal = "VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT"",
title = "Compound spinel as a masking pigment obtained by mechanochemical treatment",
pages = "34-34"
}

Sokić, M., Petrov, M., Matković, V., Andrić, L., Manojlović, V., Marković, B.,& Stojanović, J.. (2018). Compound spinel as a masking pigment obtained by mechanochemical treatment. in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT"
Macedonian union of Metallurgists., 34-34.

Sokić M, Petrov M, Matković V, Andrić L, Manojlović V, Marković B, Stojanović J. Compound spinel as a masking pigment obtained by mechanochemical treatment. in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT". 2018;:34-34..

Sokić, Miroslav, Petrov, Milan, Matković, Vladislav, Andrić, Ljubiša, Manojlović, Vaso, Marković, Branislav, Stojanović, Jovica, "Compound spinel as a masking pigment obtained by mechanochemical treatment" in VIII International Congress of Metallurgists of Macedonia “METALLURGY, MATERIALS AND ENVIRONMENT" (2018):34-34.

TY  - JOUR
AU  - Jovanović, Vladimir
AU  - Knezević, Dinko N.
AU  - Sekulić, Živko
AU  - Kragović, Milan
AU  - Stojanović, Jovica
AU  - Mihajlović, Slavica
AU  - Nisić, Dragana
AU  - Radulović, Dragan
AU  - Ivošević, Branislav
AU  - Petrov, Milan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/453
AB  - This paper presents the results of tests carried out to determine how the dosage of bentonite added as binder, affects the properties of green pellets made of the limestone fines that originate from Lithothamnium limestone processing. Bentonite was added to limestone in different mass fractions (1, 2.5, 5 and 10%), whereas all the other parameters of the pelletizing process remained constant. The aim of pelletizing was to consolidate limestone fines and form mechanically stable pellets, provided that all the other properties of limestone remain unchanged. The pellets formed in this way were analysed applying DTA/TG analysis and FTIR and SEM analyses. The results showed uniform distribution of bentonite in the pellets, demonstrated that the pellets are compact and there is no formation of new compounds. The pellets were tested for resistance to impact, compressive strength and abrasion resistance. Also disintegration tests were performed to determine the time required for the pellet to disintegrate completely in water. These mechanical properties are essential for transport, handling, storage and general use of pellets. The values of most of the parameters established for pellets with 5% bentonite, meet the standards required for use in agriculture for liming acid soils, however their application is limited because their impact resistance is unsatisfactory and the time required for their complete disintegration in water is extremely short. It should be noted that further increase of bentonite content (over 10%) will not improve the quality of green pellets. In view of the results obtained, it is necessary to introduce drying into the pelletizing process in order to bring the green pellets into solid state.
PB  - Savez hemijskih inženjera, Beograd
T2  - Hemijska industrija
T1  - Effects of bentonite binder dosage on the properties of green limestone pellets
EP  - 144
IS  - 2
SP  - 135
VL  - 71
DO  - 10.2298/HEMIND160210023J
UR  - conv_793
ER  - 

@article{
author = "Jovanović, Vladimir and Knezević, Dinko N. and Sekulić, Živko and Kragović, Milan and Stojanović, Jovica and Mihajlović, Slavica and Nisić, Dragana and Radulović, Dragan and Ivošević, Branislav and Petrov, Milan",
year = "2017",
abstract = "This paper presents the results of tests carried out to determine how the dosage of bentonite added as binder, affects the properties of green pellets made of the limestone fines that originate from Lithothamnium limestone processing. Bentonite was added to limestone in different mass fractions (1, 2.5, 5 and 10%), whereas all the other parameters of the pelletizing process remained constant. The aim of pelletizing was to consolidate limestone fines and form mechanically stable pellets, provided that all the other properties of limestone remain unchanged. The pellets formed in this way were analysed applying DTA/TG analysis and FTIR and SEM analyses. The results showed uniform distribution of bentonite in the pellets, demonstrated that the pellets are compact and there is no formation of new compounds. The pellets were tested for resistance to impact, compressive strength and abrasion resistance. Also disintegration tests were performed to determine the time required for the pellet to disintegrate completely in water. These mechanical properties are essential for transport, handling, storage and general use of pellets. The values of most of the parameters established for pellets with 5% bentonite, meet the standards required for use in agriculture for liming acid soils, however their application is limited because their impact resistance is unsatisfactory and the time required for their complete disintegration in water is extremely short. It should be noted that further increase of bentonite content (over 10%) will not improve the quality of green pellets. In view of the results obtained, it is necessary to introduce drying into the pelletizing process in order to bring the green pellets into solid state.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Hemijska industrija",
title = "Effects of bentonite binder dosage on the properties of green limestone pellets",
pages = "144-135",
number = "2",
volume = "71",
doi = "10.2298/HEMIND160210023J",
url = "conv_793"
}

Jovanović, V., Knezević, D. N., Sekulić, Ž., Kragović, M., Stojanović, J., Mihajlović, S., Nisić, D., Radulović, D., Ivošević, B.,& Petrov, M.. (2017). Effects of bentonite binder dosage on the properties of green limestone pellets. in Hemijska industrija
Savez hemijskih inženjera, Beograd., 71(2), 135-144.
https://doi.org/10.2298/HEMIND160210023J
conv_793

Jovanović V, Knezević DN, Sekulić Ž, Kragović M, Stojanović J, Mihajlović S, Nisić D, Radulović D, Ivošević B, Petrov M. Effects of bentonite binder dosage on the properties of green limestone pellets. in Hemijska industrija. 2017;71(2):135-144.
doi:10.2298/HEMIND160210023J
conv_793 .

Jovanović, Vladimir, Knezević, Dinko N., Sekulić, Živko, Kragović, Milan, Stojanović, Jovica, Mihajlović, Slavica, Nisić, Dragana, Radulović, Dragan, Ivošević, Branislav, Petrov, Milan, "Effects of bentonite binder dosage on the properties of green limestone pellets" in Hemijska industrija, 71, no. 2 (2017):135-144,
https://doi.org/10.2298/HEMIND160210023J .,
conv_793 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1059
AB  - This study presents the results of an investigation of high temperature materials – refractory filler based on cordierite, mullite and zircon for the synthesis of new refractory pattern coating and application in foundry. In order to obtain better properties of refractory fillers, special attention in the research was devoted to the preparation of fillers by grinding and mechanical activation. The application of the fillers for the synthesis of refractory pattern coatings and use in the new EPC casting process for obtained aluminum alloys and steel casting was shown positive results.
C3  - XVII Balkan Mineral Processing Congress
T1  - Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon
EP  - 612
SP  - 607
ER  - 

@conference{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2017",
abstract = "This study presents the results of an investigation of high temperature materials – refractory filler based on cordierite, mullite and zircon for the synthesis of new refractory pattern coating and application in foundry. In order to obtain better properties of refractory fillers, special attention in the research was devoted to the preparation of fillers by grinding and mechanical activation. The application of the fillers for the synthesis of refractory pattern coatings and use in the new EPC casting process for obtained aluminum alloys and steel casting was shown positive results.",
journal = "XVII Balkan Mineral Processing Congress",
title = "Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon",
pages = "612-607"
}

Pavlović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2017). Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon. in XVII Balkan Mineral Processing Congress, 607-612.

Pavlović M, Andrić L, Radulović D, Petrov M. Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon. in XVII Balkan Mineral Processing Congress. 2017;:607-612..

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon" in XVII Balkan Mineral Processing Congress (2017):607-612.

TY  - CONF
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1067
AB  - Flotation of ions and molecules represents a promising method of separating components from the solution, or in our case, gelled copper salt from the blue waters. The method of flotation of ions and molecules is basicly flotation extraction process which produces different concentration gradients of more component phase system. Different concentration gradients in the flotation extraction are due to the driving forces of the participating molecules driven by molecular interactions. More component phase system i.e. flotation pulp consists of water molecules of the solute, and a suitable reagent which has the role of connection of the liquid and gaseous phases dispersed in a biphasic system. Such a system leads to the interaction of the solute with a reagent to the formation of coagulated component in water as solvent. Separation in the polyphased system is in accordance with Van't Hoff- th equation, and spontaneously occurs in two-phase systems like gaseous-fluid, such as the system of flotation pulp. By use of the osmotic pressure in the columnn flotation machine comes to the separation of the flotation pulp to the heavy and light phase. This allows the molecules of water to form their natural distances which are only valid for molecules of pure water, apropos for heavy phase. Also, the solute forms it’s light phase, copper – surfactant salt as insoluble product. For some poliphase systems such as colloidal systems like in flotation process are sufficient atmospheric pressure conditions and for others solutions should be applied overpressure while being aerated. The paper presents the results of the research of flotation extraction of blue water i.e. copper solution content of 0.2 g/l. From the results, it is concluded that there is a possibility of purifying of blue water from copper mine tailings using the flotation extraction technology.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Flotoextraction of blue water
EP  - 252
SP  - 243
ER  - 

@conference{
author = "Petrov, Milan and Andrić, Ljubiša and Radulović, Dragan",
year = "2017",
abstract = "Flotation of ions and molecules represents a promising method of separating components from the solution, or in our case, gelled copper salt from the blue waters. The method of flotation of ions and molecules is basicly flotation extraction process which produces different concentration gradients of more component phase system. Different concentration gradients in the flotation extraction are due to the driving forces of the participating molecules driven by molecular interactions. More component phase system i.e. flotation pulp consists of water molecules of the solute, and a suitable reagent which has the role of connection of the liquid and gaseous phases dispersed in a biphasic system. Such a system leads to the interaction of the solute with a reagent to the formation of coagulated component in water as solvent. Separation in the polyphased system is in accordance with Van't Hoff- th equation, and spontaneously occurs in two-phase systems like gaseous-fluid, such as the system of flotation pulp. By use of the osmotic pressure in the columnn flotation machine comes to the separation of the flotation pulp to the heavy and light phase. This allows the molecules of water to form their natural distances which are only valid for molecules of pure water, apropos for heavy phase. Also, the solute forms it’s light phase, copper – surfactant salt as insoluble product. For some poliphase systems such as colloidal systems like in flotation process are sufficient atmospheric pressure conditions and for others solutions should be applied overpressure while being aerated. The paper presents the results of the research of flotation extraction of blue water i.e. copper solution content of 0.2 g/l. From the results, it is concluded that there is a possibility of purifying of blue water from copper mine tailings using the flotation extraction technology.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Flotoextraction of blue water",
pages = "252-243"
}

Petrov, M., Andrić, L.,& Radulović, D.. (2017). Flotoextraction of blue water. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 243-252.

Petrov M, Andrić L, Radulović D. Flotoextraction of blue water. in XII International Symposium on recycling technologies and sustainable development. 2017;:243-252..

Petrov, Milan, Andrić, Ljubiša, Radulović, Dragan, "Flotoextraction of blue water" in XII International Symposium on recycling technologies and sustainable development (2017):243-252.

TY  - CONF
AU  - Trumbulović, Ljiljana
AU  - Pavlović, Marko
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1055
AB  - Hazardous products, although used in accordance with instructions, can become dangerous when people forget the warning that this is a dangerous product or when they unconsciously and irresponsibly handling. The aim of this paper is to highlight the problems and lack of knowledge and awareness of the harmful effects of these products on human health and environment.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Dangerous product in households
EP  - 269
SP  - 262
ER  - 

@conference{
author = "Trumbulović, Ljiljana and Pavlović, Marko and Radulović, Dragan and Petrov, Milan and Andrić, Ljubiša",
year = "2017",
abstract = "Hazardous products, although used in accordance with instructions, can become dangerous when people forget the warning that this is a dangerous product or when they unconsciously and irresponsibly handling. The aim of this paper is to highlight the problems and lack of knowledge and awareness of the harmful effects of these products on human health and environment.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Dangerous product in households",
pages = "269-262"
}

Trumbulović, L., Pavlović, M., Radulović, D., Petrov, M.,& Andrić, L.. (2017). Dangerous product in households. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 262-269.

Trumbulović L, Pavlović M, Radulović D, Petrov M, Andrić L. Dangerous product in households. in XII International Symposium on recycling technologies and sustainable development. 2017;:262-269..

Trumbulović, Ljiljana, Pavlović, Marko, Radulović, Dragan, Petrov, Milan, Andrić, Ljubiša, "Dangerous product in households" in XII International Symposium on recycling technologies and sustainable development (2017):262-269.

TY  - CONF
AU  - Trumbulović, Ljiljana
AU  - Pavlović, Marko
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1056
AB  - Pharmaceutical waste is hazardous waste generated in the production and trade of medicines and medical supplies (including pharmaceuticals, drugs and chemicals that are scattered prepared and unused or have expired expiration date or be rejected for any reason, as well as organic pollutants), as well as equipment used in handling. The pharmaceutical waste include medicines (finished, galenical and main medicines and pharmaceutical substances) which is out of date. Herbal, traditional and homeopathic remedies can also be considered as pharmaceutical waste, depending on their composition. Producer and owner of pharmaceutical waste shall be treated with pharmaceutical waste as hazardous waste. Waste Management aims to protect human health and the environment with handling and disposal of waste.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Pharmaceutical waste managment
EP  - 277
SP  - 270
ER  - 

@conference{
author = "Trumbulović, Ljiljana and Pavlović, Marko and Radulović, Dragan and Petrov, Milan and Andrić, Ljubiša",
year = "2017",
abstract = "Pharmaceutical waste is hazardous waste generated in the production and trade of medicines and medical supplies (including pharmaceuticals, drugs and chemicals that are scattered prepared and unused or have expired expiration date or be rejected for any reason, as well as organic pollutants), as well as equipment used in handling. The pharmaceutical waste include medicines (finished, galenical and main medicines and pharmaceutical substances) which is out of date. Herbal, traditional and homeopathic remedies can also be considered as pharmaceutical waste, depending on their composition. Producer and owner of pharmaceutical waste shall be treated with pharmaceutical waste as hazardous waste. Waste Management aims to protect human health and the environment with handling and disposal of waste.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Pharmaceutical waste managment",
pages = "277-270"
}

Trumbulović, L., Pavlović, M., Radulović, D., Petrov, M.,& Andrić, L.. (2017). Pharmaceutical waste managment. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 270-277.

Trumbulović L, Pavlović M, Radulović D, Petrov M, Andrić L. Pharmaceutical waste managment. in XII International Symposium on recycling technologies and sustainable development. 2017;:270-277..

Trumbulović, Ljiljana, Pavlović, Marko, Radulović, Dragan, Petrov, Milan, Andrić, Ljubiša, "Pharmaceutical waste managment" in XII International Symposium on recycling technologies and sustainable development (2017):270-277.