Trumić, M., Trumić, M., Radulović, D., Terzić, A., Andrić, L.,& Petrov, M.. (2018). Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje. 
Bor : University of Belgrade, Technical Faculty in Bor..

Trumić M, Trumić M, Radulović D, Terzić A, Andrić L, Petrov M. Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje. 2018;..

Trumić, Milan, Trumić, Maja, Radulović, Dragan, Terzić, Anja, Andrić, Ljubiša, Petrov, Milan, "Uticaj smanjenja sadržaja metala u ulaznoj rudi na vrednost Bondovog radnog indexa Pb-Zn rude iz rudnika “Grot”-Kriva Feja -Vranje" (2018).

Radulović, D., Andrić, L., Terzić, A., Petrov, M., Stojanović, J., Trumić, M.,& Trumić, M.. (2018). Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Radulović D, Andrić L, Terzić A, Petrov M, Stojanović J, Trumić M, Trumić M. Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot. 2018;..

Radulović, Dragan, Andrić, Ljubiša, Terzić, Anja, Petrov, Milan, Stojanović, Jovica, Trumić, Milan, Trumić, Maja, "Dobijanje koncentrata K/Pb i K/Zn tržišnog kvaliteta postupkom gravitacijske koncentracije bogate rude sa povećanim sadržajem metaličnih minerala iz “Pb-Zn” Rudnika Grot" (2018).

TY  - CONF
AU  - Trumić, Maja
AU  - Munćan, Nevena
AU  - Trumić, Milan
AU  - Radulović, Dragan
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1065
AB  - Flotation is the process of separation based on the different physical-chemical characteristics of surfaces and their ability to wet with water. The process can be used for separation the primary and secondary materials. This paper presents the results of a laboratory study separation of plastic waste. The aim is to extract the PS plastics from the PS/ABS mixture. Experiments were carried out in a Denver cell at the pH 7 in presence of the Tannic acid as a depressant, and MIBC as a frother. The results showed that the PS plastics has a higher flotation rate constant value and high quality value fover 90%). The results indicate that the ABS and PS could be successfully separated by the froth flotation under the certain conditions. The obtained results were represented by the classical model of the first-order trying to describe the kinetics of plastics flotation with a good correlation coefficient.
PB  - Bor : Mining and Metallurgy Institute Bor
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 50th International October Conference on Mining and Metallurgy
T1  - Separation of the Ps/Abs plastics using the Froth flotation
EP  - 62
SP  - 59
ER  - 

@conference{
author = "Trumić, Maja and Munćan, Nevena and Trumić, Milan and Radulović, Dragan",
year = "2018",
abstract = "Flotation is the process of separation based on the different physical-chemical characteristics of surfaces and their ability to wet with water. The process can be used for separation the primary and secondary materials. This paper presents the results of a laboratory study separation of plastic waste. The aim is to extract the PS plastics from the PS/ABS mixture. Experiments were carried out in a Denver cell at the pH 7 in presence of the Tannic acid as a depressant, and MIBC as a frother. The results showed that the PS plastics has a higher flotation rate constant value and high quality value fover 90%). The results indicate that the ABS and PS could be successfully separated by the froth flotation under the certain conditions. The obtained results were represented by the classical model of the first-order trying to describe the kinetics of plastics flotation with a good correlation coefficient.",
publisher = "Bor : Mining and Metallurgy Institute Bor, Bor : University of Belgrade, Technical Faculty in Bor",
journal = "50th International October Conference on Mining and Metallurgy",
title = "Separation of the Ps/Abs plastics using the Froth flotation",
pages = "62-59"
}

Trumić, M., Munćan, N., Trumić, M.,& Radulović, D.. (2018). Separation of the Ps/Abs plastics using the Froth flotation. in 50th International October Conference on Mining and Metallurgy
Bor : Mining and Metallurgy Institute Bor., 59-62.

Trumić M, Munćan N, Trumić M, Radulović D. Separation of the Ps/Abs plastics using the Froth flotation. in 50th International October Conference on Mining and Metallurgy. 2018;:59-62..

Trumić, Maja, Munćan, Nevena, Trumić, Milan, Radulović, Dragan, "Separation of the Ps/Abs plastics using the Froth flotation" in 50th International October Conference on Mining and Metallurgy (2018):59-62.

TY  - CONF
AU  - Trumić, Milan
AU  - Trumić, Maja
AU  - Radulović, Dragan
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1099
AB  - An experimental investigation has been made into the effects of different factors on the results of screening efficiency of polymer samples. The used polyvinyl chloride (PVC) samples have equal content of `small`, `large` and `small-to large` particles and filled the whole area of the sieve in one, two and four characteristic layers during the screening. Visual examination showed that the particle shape was similar in whole particle size distribution in the one sample tested. In addition to the aforementioned variable, the other factors studied included samples shape, vibrating amplitude and the duration of screening. Analysis of the obtained results of the screening rate in laboratory conditions was performed by applying the classical and modified model of the first order screening kinetics. The results showed that high loading of the sieve requires a larger vibrating amplitude for good classification and that the high layer reduction of sample is a more effective remedy for good efficiency than prolongation of sieving time. It has also been shown that the particles shape has a significant impact on the screening rate. The modified kinetics model (Magdalinović–Trumić) of the first order describes polymer screening kinetics with very good correlation coefficient in all cases. The application of the classical model is not adequate for determining a screening rate constant since the correlation coefficients are smaller than the minimum correlation coefficient.
PB  - Miskolci : Miskolci University Hungary
C3  - International V4 Waste Recycling XXI Conference
T1  - The effect of sieve loading and particles shape on the results of polymer sieve kinetics
EP  - 114
SP  - 105
ER  - 

@conference{
author = "Trumić, Milan and Trumić, Maja and Radulović, Dragan",
year = "2018",
abstract = "An experimental investigation has been made into the effects of different factors on the results of screening efficiency of polymer samples. The used polyvinyl chloride (PVC) samples have equal content of `small`, `large` and `small-to large` particles and filled the whole area of the sieve in one, two and four characteristic layers during the screening. Visual examination showed that the particle shape was similar in whole particle size distribution in the one sample tested. In addition to the aforementioned variable, the other factors studied included samples shape, vibrating amplitude and the duration of screening. Analysis of the obtained results of the screening rate in laboratory conditions was performed by applying the classical and modified model of the first order screening kinetics. The results showed that high loading of the sieve requires a larger vibrating amplitude for good classification and that the high layer reduction of sample is a more effective remedy for good efficiency than prolongation of sieving time. It has also been shown that the particles shape has a significant impact on the screening rate. The modified kinetics model (Magdalinović–Trumić) of the first order describes polymer screening kinetics with very good correlation coefficient in all cases. The application of the classical model is not adequate for determining a screening rate constant since the correlation coefficients are smaller than the minimum correlation coefficient.",
publisher = "Miskolci : Miskolci University Hungary",
journal = "International V4 Waste Recycling XXI Conference",
title = "The effect of sieve loading and particles shape on the results of polymer sieve kinetics",
pages = "114-105"
}

Trumić, M., Trumić, M.,& Radulović, D.. (2018). The effect of sieve loading and particles shape on the results of polymer sieve kinetics. in International V4 Waste Recycling XXI Conference
Miskolci : Miskolci University Hungary., 105-114.

Trumić M, Trumić M, Radulović D. The effect of sieve loading and particles shape on the results of polymer sieve kinetics. in International V4 Waste Recycling XXI Conference. 2018;:105-114..

Trumić, Milan, Trumić, Maja, Radulović, Dragan, "The effect of sieve loading and particles shape on the results of polymer sieve kinetics" in International V4 Waste Recycling XXI Conference (2018):105-114.

TY  - CONF
AU  - Trumić, Maja
AU  - Trumić, Milan
AU  - Munćan, Nevena
AU  - Radulović, Dragan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1066
AB  - Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Flotation separation of thermal heat treated ABS and PS plastics
EP  - 134
SP  - 128
ER  - 

@conference{
author = "Trumić, Maja and Trumić, Milan and Munćan, Nevena and Radulović, Dragan",
year = "2017",
abstract = "Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Flotation separation of thermal heat treated ABS and PS plastics",
pages = "134-128"
}

Trumić, M., Trumić, M., Munćan, N.,& Radulović, D.. (2017). Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 128-134.

Trumić M, Trumić M, Munćan N, Radulović D. Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development. 2017;:128-134..

Trumić, Maja, Trumić, Milan, Munćan, Nevena, Radulović, Dragan, "Flotation separation of thermal heat treated ABS and PS plastics" in XII International Symposium on recycling technologies and sustainable development (2017):128-134.

TY  - CONF
AU  - Nikolić, Vladimir
AU  - Trumić, Milan
AU  - Trumić, Maja
AU  - Radulović, Dragan
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1095
AB  - The paper aims to show the wide application of micronized products that arise after micronization milling. Fine-tinted-micronized materials such as alumosilicates, lycones, non-metallic mineral raw materials, thanks to their physical-mechanical, physical and chemical properties (density, color, shape, reflection index, conductivity, size and structure of micro particles, etc.) production of modern new materials. They can be used as fillers, coatings, for dusting, used in processing, pharmaceutical and other industrial branches, and they are irreplaceable in the production and processing of many definite products. Micronized mineral resources represent a significant potential in remedying the harmful effects of environmental pollution, but also one of the crucial factors in preventing this same pollution.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 49th International October Conference on Mining and Metallurgy
T1  - New directions of the application of micronizing mineral raw materials
EP  - 581
SP  - 578
ER  - 

@conference{
author = "Nikolić, Vladimir and Trumić, Milan and Trumić, Maja and Radulović, Dragan and Andrić, Ljubiša",
year = "2017",
abstract = "The paper aims to show the wide application of micronized products that arise after micronization milling. Fine-tinted-micronized materials such as alumosilicates, lycones, non-metallic mineral raw materials, thanks to their physical-mechanical, physical and chemical properties (density, color, shape, reflection index, conductivity, size and structure of micro particles, etc.) production of modern new materials. They can be used as fillers, coatings, for dusting, used in processing, pharmaceutical and other industrial branches, and they are irreplaceable in the production and processing of many definite products. Micronized mineral resources represent a significant potential in remedying the harmful effects of environmental pollution, but also one of the crucial factors in preventing this same pollution.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "49th International October Conference on Mining and Metallurgy",
title = "New directions of the application of micronizing mineral raw materials",
pages = "581-578"
}

Nikolić, V., Trumić, M., Trumić, M., Radulović, D.,& Andrić, L.. (2017). New directions of the application of micronizing mineral raw materials. in 49th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 578-581.

Nikolić V, Trumić M, Trumić M, Radulović D, Andrić L. New directions of the application of micronizing mineral raw materials. in 49th International October Conference on Mining and Metallurgy. 2017;:578-581..

Nikolić, Vladimir, Trumić, Milan, Trumić, Maja, Radulović, Dragan, Andrić, Ljubiša, "New directions of the application of micronizing mineral raw materials" in 49th International October Conference on Mining and Metallurgy (2017):578-581.

TY  - CONF
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Trumić, Maja
AU  - Trumić, Milan
AU  - Bogdanović, Grozdanka
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1042
AB  - This paper presents results of investigations of the possibility of using “Gigovići”-Ulcinjlimestone (Republic Montenegro) as filler in various industry branches. Micronization methods, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses (DT/TG) were performed. Physico-chemical properties of this limestone classify it among high quality carbonate raw materials with relativelyhigh CaCO3 content of 98.16%, as well as low MgCO3 content of 1.53% and low silicate content (SiO2 0.30%). Its quality satisfies requirements of standards on using of calcium carbonate as filler in industry of paints and coatings; paper industry, rubber and PVC industry; glass industry; production of mineral fertilizers; foundry industry; sugar industry and metallurgy. Due to the low degree of whiteness (85,25%) “Gigovići” limestone cannot be used in pharmaceutical and cosmetics industry. Due to relatively high content of MgO (0,73%) and Fe (340ppm), as well as high content of heavy metals, Cu (18 ppm), Ni (24 ppm) and Cd (9 ppm), “Gigovići” limestone cannot be used, in production of cattle feed and for neutralization of acidic soils.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Possibility Of Using Limestone From “Gigovići”-Ulcinj Deposit As Filler In Various Industry Branches
EP  - 104
SP  - 97
ER  - 

@conference{
author = "Radulović, Dragan and Petrov, Milan and Trumić, Maja and Trumić, Milan and Bogdanović, Grozdanka and Andrić, Ljubiša",
year = "2017",
abstract = "This paper presents results of investigations of the possibility of using “Gigovići”-Ulcinjlimestone (Republic Montenegro) as filler in various industry branches. Micronization methods, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses (DT/TG) were performed. Physico-chemical properties of this limestone classify it among high quality carbonate raw materials with relativelyhigh CaCO3 content of 98.16%, as well as low MgCO3 content of 1.53% and low silicate content (SiO2 0.30%). Its quality satisfies requirements of standards on using of calcium carbonate as filler in industry of paints and coatings; paper industry, rubber and PVC industry; glass industry; production of mineral fertilizers; foundry industry; sugar industry and metallurgy. Due to the low degree of whiteness (85,25%) “Gigovići” limestone cannot be used in pharmaceutical and cosmetics industry. Due to relatively high content of MgO (0,73%) and Fe (340ppm), as well as high content of heavy metals, Cu (18 ppm), Ni (24 ppm) and Cd (9 ppm), “Gigovići” limestone cannot be used, in production of cattle feed and for neutralization of acidic soils.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Possibility Of Using Limestone From “Gigovići”-Ulcinj Deposit As Filler In Various Industry Branches",
pages = "104-97"
}

Radulović, D., Petrov, M., Trumić, M., Trumić, M., Bogdanović, G.,& Andrić, L.. (2017). Possibility Of Using Limestone From “Gigovići”-Ulcinj Deposit As Filler In Various Industry Branches. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 97-104.

Radulović D, Petrov M, Trumić M, Trumić M, Bogdanović G, Andrić L. Possibility Of Using Limestone From “Gigovići”-Ulcinj Deposit As Filler In Various Industry Branches. in XII International Symposium on recycling technologies and sustainable development. 2017;:97-104..

Radulović, Dragan, Petrov, Milan, Trumić, Maja, Trumić, Milan, Bogdanović, Grozdanka, Andrić, Ljubiša, "Possibility Of Using Limestone From “Gigovići”-Ulcinj Deposit As Filler In Various Industry Branches" in XII International Symposium on recycling technologies and sustainable development (2017):97-104.

TY  - CONF
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Trumić, Milan
AU  - Bogdanović, Grozdanka
AU  - Trumić, Maja
AU  - Andrić, Ljubiša
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1041
AB  - This paper gives a review of results determining conditions of thickening and filtration of waste material from the flotation plant “Feldspar” – Bujanovac. This flotation plant last few years did not fuctiona as should be, and have many problems. Investigation of waste materials, should to enable recycling and re-use of flotation tailings. Tests of possibilities of thickening and filtration of the non-magnetic fraction of waste material sample of the class -0,063 mm after magnetic separation in laboratory conditions have been carried out within this research. Based on dewatering testing, time of thickening and calculated results have been determined.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XI International Symposium on Recycling Technologies and Sustainable Development
T1  - Utilization of waste materials from flotation plant „Feldspar“ Bujanovac
EP  - 261
SP  - 254
ER  - 

@conference{
author = "Radulović, Dragan and Petrov, Milan and Trumić, Milan and Bogdanović, Grozdanka and Trumić, Maja and Andrić, Ljubiša",
year = "2016",
abstract = "This paper gives a review of results determining conditions of thickening and filtration of waste material from the flotation plant “Feldspar” – Bujanovac. This flotation plant last few years did not fuctiona as should be, and have many problems. Investigation of waste materials, should to enable recycling and re-use of flotation tailings. Tests of possibilities of thickening and filtration of the non-magnetic fraction of waste material sample of the class -0,063 mm after magnetic separation in laboratory conditions have been carried out within this research. Based on dewatering testing, time of thickening and calculated results have been determined.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XI International Symposium on Recycling Technologies and Sustainable Development",
title = "Utilization of waste materials from flotation plant „Feldspar“ Bujanovac",
pages = "261-254"
}

Radulović, D., Petrov, M., Trumić, M., Bogdanović, G., Trumić, M.,& Andrić, L.. (2016). Utilization of waste materials from flotation plant „Feldspar“ Bujanovac. in XI International Symposium on Recycling Technologies and Sustainable Development
Bor : University of Belgrade, Technical Faculty in Bor., 254-261.

Radulović D, Petrov M, Trumić M, Bogdanović G, Trumić M, Andrić L. Utilization of waste materials from flotation plant „Feldspar“ Bujanovac. in XI International Symposium on Recycling Technologies and Sustainable Development. 2016;:254-261..

Radulović, Dragan, Petrov, Milan, Trumić, Milan, Bogdanović, Grozdanka, Trumić, Maja, Andrić, Ljubiša, "Utilization of waste materials from flotation plant „Feldspar“ Bujanovac" in XI International Symposium on Recycling Technologies and Sustainable Development (2016):254-261.

Milošević, V., Milićević, S., Trumić, M., Trumić, M., Bartulović, Z., Todorović, D., Jovanović, V., Ivošević, B., Čarapić, J., Jogrić, R.,& Adamović, V.. (2015). Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja. 
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina..

Milošević V, Milićević S, Trumić M, Trumić M, Bartulović Z, Todorović D, Jovanović V, Ivošević B, Čarapić J, Jogrić R, Adamović V. Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja. 2015;..

Milošević, Vladan, Milićević, Sonja, Trumić, Milan, Trumić, Maja, Bartulović, Zoran, Todorović, Dejan, Jovanović, Vladimir, Ivošević, Branislav, Čarapić, Jelena, Jogrić, Robert, Adamović, Vladimir, "Definisanje nove proizvodne linije flotacijske koncentracije minerala bakra, olova i cinka iz polimetalične rude ležišta „ Podvirovi i Conjev kamen“ – Bosilmetal primenom savremenijih tehničko-tehnoloških rešenja" (2015).