TY  - CONF
AU  - Marković, Branislav
AU  - Manasijević, Dragan
AU  - Sokić, Miroslav
AU  - Talijan, Nadežda
AU  - Štrbac, Nada
AU  - Manojlović, Vaso
AU  - Janjušević, Zoran
AU  - Bugarčić, Mladen
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/951
AB  - High toxicity of lead and damaging effects on the environment resulted in its prohibited
use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great
effort has been made on the development of new Pb-free soldering and brazing materials
[1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based
advanced lead-free solder materials for high temperature application [6-8]. The results of
phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from
bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations
were performed using DTA/DSC experimental methods, while thermodynamic calculation
was done according to the CALPHAD method using PANDAT software. The results of the
DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section,
including liquidus temperatures and other phase transition temperatures are presented in
graphical abstract. The phase diagram of the investigated Bi-CuNi section has been
calculated using PANDAT software and is presented in graphical abstract, together with
experimentally determined DTA/DSC points. It could be noticed that calculated phase
diagram is in good agreement with DTA/DSC experiments.
PB  - Kosovska Mitrovica : Fakultet Tehničkih nauka
C3  - Osmi simpozijum o termodinamici i faznim dijagramima
T1  - Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system
EP  - 83
SP  - 81
ER  - 

@conference{
author = "Marković, Branislav and Manasijević, Dragan and Sokić, Miroslav and Talijan, Nadežda and Štrbac, Nada and Manojlović, Vaso and Janjušević, Zoran and Bugarčić, Mladen",
year = "2017",
abstract = "High toxicity of lead and damaging effects on the environment resulted in its prohibited
use in electronic materials (RoHS Directive from 1 July 2006 in the EU). Therefore, great
effort has been made on the development of new Pb-free soldering and brazing materials
[1-5]. The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based
advanced lead-free solder materials for high temperature application [6-8]. The results of
phase equilibria investigation of the alloys selected in the Bi-Cu0.75Ni0.25 section from
bismuth corner with molar ratio Cu:Ni = 3:1, are presented in this paper. The investigations
were performed using DTA/DSC experimental methods, while thermodynamic calculation
was done according to the CALPHAD method using PANDAT software. The results of the
DTA/DSC heating measurements of the chosen samples in the Bi-Cu0.75Ni0.25 section,
including liquidus temperatures and other phase transition temperatures are presented in
graphical abstract. The phase diagram of the investigated Bi-CuNi section has been
calculated using PANDAT software and is presented in graphical abstract, together with
experimentally determined DTA/DSC points. It could be noticed that calculated phase
diagram is in good agreement with DTA/DSC experiments.",
publisher = "Kosovska Mitrovica : Fakultet Tehničkih nauka",
journal = "Osmi simpozijum o termodinamici i faznim dijagramima",
title = "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system",
pages = "83-81"
}

Marković, B., Manasijević, D., Sokić, M., Talijan, N., Štrbac, N., Manojlović, V., Janjušević, Z.,& Bugarčić, M.. (2017). Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima
Kosovska Mitrovica : Fakultet Tehničkih nauka., 81-83.

Marković B, Manasijević D, Sokić M, Talijan N, Štrbac N, Manojlović V, Janjušević Z, Bugarčić M. Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system. in Osmi simpozijum o termodinamici i faznim dijagramima. 2017;:81-83..

Marković, Branislav, Manasijević, Dragan, Sokić, Miroslav, Talijan, Nadežda, Štrbac, Nada, Manojlović, Vaso, Janjušević, Zoran, Bugarčić, Mladen, "Thermal analysis application on the phase equilibria investigation of the alloys in the Bi- Cu0.75Ni0.25 section of the Bi-Cu-Ni system" in Osmi simpozijum o termodinamici i faznim dijagramima (2017):81-83.

TY  - JOUR
AU  - Marković, Branislav
AU  - Manasijević, Dragan
AU  - Talijan, Nadežda
AU  - Sokić, Miroslav
AU  - Štrbac, Nada
AU  - Patarić, Aleksandra
AU  - Bugarčić, Mladen
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/457
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution model along the line with the molar ratio of Cu: Ni = 1:1. The experimental part shows thermal, structural, electrical and mechanical properties based on differential scanning calorimetry (DSC), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), electroconductivity and hardness measurements of the alloys selected in the section from bismuth corner with molar ratio Cu: Ni = 1:1, Cu: Ni = 3:1, and Cu: Ni = 1:3.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties
EP  - 254
IS  - 3
SP  - 241
VL  - 23
DO  - 10.30544/316
UR  - conv_1218
ER  - 

@article{
author = "Marković, Branislav and Manasijević, Dragan and Talijan, Nadežda and Sokić, Miroslav and Štrbac, Nada and Patarić, Aleksandra and Bugarčić, Mladen",
year = "2017",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution model along the line with the molar ratio of Cu: Ni = 1:1. The experimental part shows thermal, structural, electrical and mechanical properties based on differential scanning calorimetry (DSC), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), electroconductivity and hardness measurements of the alloys selected in the section from bismuth corner with molar ratio Cu: Ni = 1:1, Cu: Ni = 3:1, and Cu: Ni = 1:3.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties",
pages = "254-241",
number = "3",
volume = "23",
doi = "10.30544/316",
url = "conv_1218"
}

Marković, B., Manasijević, D., Talijan, N., Sokić, M., Štrbac, N., Patarić, A.,& Bugarčić, M.. (2017). Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 23(3), 241-254.
https://doi.org/10.30544/316
conv_1218

Marković B, Manasijević D, Talijan N, Sokić M, Štrbac N, Patarić A, Bugarčić M. Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties. in Metallurgical & Materials Engineering. 2017;23(3):241-254.
doi:10.30544/316
conv_1218 .

Marković, Branislav, Manasijević, Dragan, Talijan, Nadežda, Sokić, Miroslav, Štrbac, Nada, Patarić, Aleksandra, Bugarčić, Mladen, "Ternary bi-cu-ni alloys - thermodynamics, characterization, mechanical and electrical properties" in Metallurgical & Materials Engineering, 23, no. 3 (2017):241-254,
https://doi.org/10.30544/316 .,
conv_1218 .

TY  - JOUR
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
AU  - Mitovski, Aleksandra
AU  - Talijan, Nadežda
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/386
AB  - Uredništvo časopisa 'Reciklaža i održivi razvoj' je u dogovoru sa autorskim timom preglednog rada pod nazivom ' EKološki rizici i reciklaža nanomaterijala - aktuelna pitanja ' (D. Živković, Lj. Balanović, A. Mitovski, N. Talijan, N. Štrbac, M. Sokić, D. Manasijević, D. Minić, V. Ćosović), koji je publikovan u ovom časopisu vol.7 iz 2014. godine (str.1-8), donelo odluku da se zbog uočenog ozbiljnog previda (na osnovu provere CEON-a), koji se ogleda u neadekvatnom citiranju jedne reference, odnosno izostavljanju reference iz koje su korišćeni pojedini tekstualni navodi, kao i dupliranja pojedinih referenci, izvrši neophodna ispravka onih delova rada u kome pomenuti referentni izvor nije adekvatno naveden, kao i ispravke u listi referenci, a u skladu sa propisanom procedurom.
AB  - Editorial board of the 'Recycling and Sustainable Development' Journal in agreement with the authors of the article titled 'Nanomaterials environmental risks and recycling - actual issues' (D. Zivkovic, Lj. Balanović, A. Mitovski, N. Talijan, N. Strbac , M. Sokić, D. Manasijević, D. Minić, V. Ćosović), which was published in this journal vol. 7 in 2014 (p. 1-8), made the decision to do correction of article because of a perceived serious oversights (based on check out by CEON). Oversight is reflected in inadequate citing a reference, or omission of reference from which the text used by individual states, as well as the duplication of certain references. The necessary correction refers to the parts of the article which reference source is not adequately specified and updates the list of references, in accordance with prescribed procedure.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Recycling and Sustainable Development
T1  - Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1)
T1  - Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1)
EP  - 4
IS  - 1
SP  - 1
VL  - 9
DO  - 10.5937/ror1601001Z
UR  - conv_403
ER  - 

@article{
author = "Živković, Dragana and Balanović, Ljubiša and Mitovski, Aleksandra and Talijan, Nadežda and Štrbac, Nada and Sokić, Miroslav and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan",
year = "2016",
abstract = "Uredništvo časopisa 'Reciklaža i održivi razvoj' je u dogovoru sa autorskim timom preglednog rada pod nazivom ' EKološki rizici i reciklaža nanomaterijala - aktuelna pitanja ' (D. Živković, Lj. Balanović, A. Mitovski, N. Talijan, N. Štrbac, M. Sokić, D. Manasijević, D. Minić, V. Ćosović), koji je publikovan u ovom časopisu vol.7 iz 2014. godine (str.1-8), donelo odluku da se zbog uočenog ozbiljnog previda (na osnovu provere CEON-a), koji se ogleda u neadekvatnom citiranju jedne reference, odnosno izostavljanju reference iz koje su korišćeni pojedini tekstualni navodi, kao i dupliranja pojedinih referenci, izvrši neophodna ispravka onih delova rada u kome pomenuti referentni izvor nije adekvatno naveden, kao i ispravke u listi referenci, a u skladu sa propisanom procedurom., Editorial board of the 'Recycling and Sustainable Development' Journal in agreement with the authors of the article titled 'Nanomaterials environmental risks and recycling - actual issues' (D. Zivkovic, Lj. Balanović, A. Mitovski, N. Talijan, N. Strbac , M. Sokić, D. Manasijević, D. Minić, V. Ćosović), which was published in this journal vol. 7 in 2014 (p. 1-8), made the decision to do correction of article because of a perceived serious oversights (based on check out by CEON). Oversight is reflected in inadequate citing a reference, or omission of reference from which the text used by individual states, as well as the duplication of certain references. The necessary correction refers to the parts of the article which reference source is not adequately specified and updates the list of references, in accordance with prescribed procedure.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Recycling and Sustainable Development",
title = "Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1), Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1)",
pages = "4-1",
number = "1",
volume = "9",
doi = "10.5937/ror1601001Z",
url = "conv_403"
}

Živković, D., Balanović, L., Mitovski, A., Talijan, N., Štrbac, N., Sokić, M., Manasijević, D., Minić, D.,& Ćosović, V.. (2016). Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1). in Recycling and Sustainable Development
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 9(1), 1-4.
https://doi.org/10.5937/ror1601001Z
conv_403

Živković D, Balanović L, Mitovski A, Talijan N, Štrbac N, Sokić M, Manasijević D, Minić D, Ćosović V. Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1). in Recycling and Sustainable Development. 2016;9(1):1-4.
doi:10.5937/ror1601001Z
conv_403 .

Živković, Dragana, Balanović, Ljubiša, Mitovski, Aleksandra, Talijan, Nadežda, Štrbac, Nada, Sokić, Miroslav, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, "Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1)" in Recycling and Sustainable Development, 9, no. 1 (2016):1-4,
https://doi.org/10.5937/ror1601001Z .,
conv_403 .

TY  - JOUR
AU  - Marković, Branislav
AU  - Živković, D.
AU  - Manasijević, Dragan
AU  - Sokić, Miroslav
AU  - Minić, Duško
AU  - Talijan, Nadežda
AU  - Stajić-Trosić, Jasna
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/325
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB  - Polish Acad Sciences Committee Metallurgy, Krakow
T2  - Archives of Metallurgy and Materials
T1  - Thermal, structural and electrical properties of some bi-cu-ni alloys
EP  - 120
IS  - 1
SP  - 117
VL  - 59
DO  - 10.2478/amm-2014-0018
UR  - conv_689
ER  - 

@article{
author = "Marković, Branislav and Živković, D. and Manasijević, Dragan and Sokić, Miroslav and Minić, Duško and Talijan, Nadežda and Stajić-Trosić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
pages = "120-117",
number = "1",
volume = "59",
doi = "10.2478/amm-2014-0018",
url = "conv_689"
}

Marković, B., Živković, D., Manasijević, D., Sokić, M., Minić, D., Talijan, N.,& Stajić-Trosić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018
conv_689

Marković B, Živković D, Manasijević D, Sokić M, Minić D, Talijan N, Stajić-Trosić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018
conv_689 .

Marković, Branislav, Živković, D., Manasijević, Dragan, Sokić, Miroslav, Minić, Duško, Talijan, Nadežda, Stajić-Trosić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 .,
conv_689 .

TY  - JOUR
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
AU  - Mitovski, Aleksandra
AU  - Talijan, Nadežda
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
PY  - 2014
UR  - https://ritnms.itnms.ac.rs/handle/123456789/301
AB  - Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu.
AB  - Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Recycling and Sustainable Development
T1  - Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja
T1  - Nanomaterials environmental risks and recycling: Actual issues
EP  - 8
IS  - 1
SP  - 1
VL  - 7
DO  - 10.5937/ror1401001Z
UR  - conv_402
ER  - 

@article{
author = "Živković, Dragana and Balanović, Ljubiša and Mitovski, Aleksandra and Talijan, Nadežda and Štrbac, Nada and Sokić, Miroslav and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan",
year = "2014",
abstract = "Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu., Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Recycling and Sustainable Development",
title = "Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja, Nanomaterials environmental risks and recycling: Actual issues",
pages = "8-1",
number = "1",
volume = "7",
doi = "10.5937/ror1401001Z",
url = "conv_402"
}

Živković, D., Balanović, L., Mitovski, A., Talijan, N., Štrbac, N., Sokić, M., Manasijević, D., Minić, D.,& Ćosović, V.. (2014). Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja. in Recycling and Sustainable Development
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 7(1), 1-8.
https://doi.org/10.5937/ror1401001Z
conv_402

Živković D, Balanović L, Mitovski A, Talijan N, Štrbac N, Sokić M, Manasijević D, Minić D, Ćosović V. Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja. in Recycling and Sustainable Development. 2014;7(1):1-8.
doi:10.5937/ror1401001Z
conv_402 .

Živković, Dragana, Balanović, Ljubiša, Mitovski, Aleksandra, Talijan, Nadežda, Štrbac, Nada, Sokić, Miroslav, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, "Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja" in Recycling and Sustainable Development, 7, no. 1 (2014):1-8,
https://doi.org/10.5937/ror1401001Z .,
conv_402 .

TY  - JOUR
AU  - Živković, D.
AU  - Ćosović, Vladan
AU  - Živković, Z.
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Talijan, Nadežda
AU  - Boyanov, B.
AU  - Mitovski, Aleksandra
PY  - 2013
UR  - https://ritnms.itnms.ac.rs/handle/123456789/278
AB  - The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials Science in Semiconductor Processing
T1  - Kinetic investigation of silver sulfide phase transformations
EP  - 220
IS  - 1
SP  - 217
VL  - 16
DO  - 10.1016/j.mssp.2012.06.023
UR  - conv_639
ER  - 

@article{
author = "Živković, D. and Ćosović, Vladan and Živković, Z. and Štrbac, Nada and Sokić, Miroslav and Talijan, Nadežda and Boyanov, B. and Mitovski, Aleksandra",
year = "2013",
abstract = "The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials Science in Semiconductor Processing",
title = "Kinetic investigation of silver sulfide phase transformations",
pages = "220-217",
number = "1",
volume = "16",
doi = "10.1016/j.mssp.2012.06.023",
url = "conv_639"
}

Živković, D., Ćosović, V., Živković, Z., Štrbac, N., Sokić, M., Talijan, N., Boyanov, B.,& Mitovski, A.. (2013). Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing
Elsevier Sci Ltd, Oxford., 16(1), 217-220.
https://doi.org/10.1016/j.mssp.2012.06.023
conv_639

Živković D, Ćosović V, Živković Z, Štrbac N, Sokić M, Talijan N, Boyanov B, Mitovski A. Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing. 2013;16(1):217-220.
doi:10.1016/j.mssp.2012.06.023
conv_639 .

Živković, D., Ćosović, Vladan, Živković, Z., Štrbac, Nada, Sokić, Miroslav, Talijan, Nadežda, Boyanov, B., Mitovski, Aleksandra, "Kinetic investigation of silver sulfide phase transformations" in Materials Science in Semiconductor Processing, 16, no. 1 (2013):217-220,
https://doi.org/10.1016/j.mssp.2012.06.023 .,
conv_639 .

TY  - JOUR
AU  - Marković, Branislav
AU  - Živković, Dragana
AU  - Vrest'al, Jan
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Talijan, Nadežda
AU  - Stajić-Trosić, Jasna
AU  - Todorović, Radiša
PY  - 2010
UR  - https://ritnms.itnms.ac.rs/handle/123456789/172
AB  - Phase equilibria in the Bi-Cu-Ni ternary system have been studied using differential thermal analysis (DTA) as well as by using the calculation of the phase diagram (CALPHAD) method. Literature experimental phase equilibria data and DTA results from this study were used for thermodynamic modeling of the Bi-Cu-Ni ternary system. Isothermal sections at 300, 400, and 500 degrees C, vertical sections from bismuth corner with molar ratio Cu:Ni = 1/3, 1/1 and 3/1 and vertical section at 40 at.% Cu were calculated and compared with corresponding experimental results. Reasonable agreement between the calculated and experimental data was observed in all cases.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Calphad-Computer Coupling of Phase Diagrams and Thermochemistry
T1  - Experimental study and thermodynamic remodeling of the Bi-Cu-Ni system
EP  - 300
IS  - 3
SP  - 294
VL  - 34
DO  - 10.1016/j.calphad.2010.05.004
UR  - conv_590
ER  - 

@article{
author = "Marković, Branislav and Živković, Dragana and Vrest'al, Jan and Manasijević, Dragan and Minić, Duško and Talijan, Nadežda and Stajić-Trosić, Jasna and Todorović, Radiša",
year = "2010",
abstract = "Phase equilibria in the Bi-Cu-Ni ternary system have been studied using differential thermal analysis (DTA) as well as by using the calculation of the phase diagram (CALPHAD) method. Literature experimental phase equilibria data and DTA results from this study were used for thermodynamic modeling of the Bi-Cu-Ni ternary system. Isothermal sections at 300, 400, and 500 degrees C, vertical sections from bismuth corner with molar ratio Cu:Ni = 1/3, 1/1 and 3/1 and vertical section at 40 at.% Cu were calculated and compared with corresponding experimental results. Reasonable agreement between the calculated and experimental data was observed in all cases.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Calphad-Computer Coupling of Phase Diagrams and Thermochemistry",
title = "Experimental study and thermodynamic remodeling of the Bi-Cu-Ni system",
pages = "300-294",
number = "3",
volume = "34",
doi = "10.1016/j.calphad.2010.05.004",
url = "conv_590"
}

Marković, B., Živković, D., Vrest'al, J., Manasijević, D., Minić, D., Talijan, N., Stajić-Trosić, J.,& Todorović, R.. (2010). Experimental study and thermodynamic remodeling of the Bi-Cu-Ni system. in Calphad-Computer Coupling of Phase Diagrams and Thermochemistry
Pergamon-Elsevier Science Ltd, Oxford., 34(3), 294-300.
https://doi.org/10.1016/j.calphad.2010.05.004
conv_590

Marković B, Živković D, Vrest'al J, Manasijević D, Minić D, Talijan N, Stajić-Trosić J, Todorović R. Experimental study and thermodynamic remodeling of the Bi-Cu-Ni system. in Calphad-Computer Coupling of Phase Diagrams and Thermochemistry. 2010;34(3):294-300.
doi:10.1016/j.calphad.2010.05.004
conv_590 .

Marković, Branislav, Živković, Dragana, Vrest'al, Jan, Manasijević, Dragan, Minić, Duško, Talijan, Nadežda, Stajić-Trosić, Jasna, Todorović, Radiša, "Experimental study and thermodynamic remodeling of the Bi-Cu-Ni system" in Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 34, no. 3 (2010):294-300,
https://doi.org/10.1016/j.calphad.2010.05.004 .,
conv_590 .