The results have shoun that the break force in the "wet" process increases with 1.51kN for PVC+C at 1.63 kN, in a sample of PVC+CS-3, which is a completely hydrophobized. In the "dry" process, the breaking force increases from 1.51kN in PVC+C to 1.55kN in PVC+CD-3. Breaking limit increases with degree of hydrophobization and the "wet" process from 36.72 MPa in PVC+C to38.17MPa in PVC+CS-1.5 and further to 39.89 MPa in a sample of PVC+CS-3. In the “dry” process, the breaking limit grows from 36.72 MPa for PVC+to 38.26MPa in a sample of PVC+CD-3 with coating degree of 99.90%. Strenght limit also changes with coating degree (hydrophobization), while the strength force remains almost unchanged in both procedures.
Keywords:
limestone / polyvinylchloride / hydrophobization
Source:
47th International October Conference on Mining and Metallurgy, 2015, 21-24
Publisher:
Bor : University of Belgrade, Technical Faculty in Bor
TY - CONF
AU - Mihajlović, Slavica
AU - Radulović, Dragan
AU - Sekulić, Živko
AU - Jovanović, Vladimir
AU - Kašić, Vladan
PY - 2015
UR - https://ritnms.itnms.ac.rs/handle/123456789/718
AB - The results have shoun that the break force in the "wet" process increases with 1.51kN for PVC+C at 1.63 kN, in a sample of PVC+CS-3, which is a completely hydrophobized. In the "dry" process, the breaking force increases from 1.51kN in PVC+C to 1.55kN in PVC+CD-3. Breaking limit increases with degree of hydrophobization and the "wet" process from 36.72 MPa in PVC+C to38.17MPa in PVC+CS-1.5 and further to 39.89 MPa in a sample of PVC+CS-3. In the “dry” process, the breaking limit grows from 36.72 MPa for PVC+to 38.26MPa in a sample of PVC+CD-3 with coating degree of 99.90%. Strenght limit also changes with coating degree (hydrophobization), while the strength force remains almost unchanged in both procedures.
PB - Bor : University of Belgrade, Technical Faculty in Bor
PB - Bor : Mining and Metallurgy Institute Bor
C3 - 47th International October Conference on Mining and Metallurgy
T1 - Influence of hidrofobized limestone as a filler on the mechanical properties of PVC
EP - 24
SP - 21
ER -
@conference{
author = "Mihajlović, Slavica and Radulović, Dragan and Sekulić, Živko and Jovanović, Vladimir and Kašić, Vladan",
year = "2015",
abstract = "The results have shoun that the break force in the "wet" process increases with 1.51kN for PVC+C at 1.63 kN, in a sample of PVC+CS-3, which is a completely hydrophobized. In the "dry" process, the breaking force increases from 1.51kN in PVC+C to 1.55kN in PVC+CD-3. Breaking limit increases with degree of hydrophobization and the "wet" process from 36.72 MPa in PVC+C to38.17MPa in PVC+CS-1.5 and further to 39.89 MPa in a sample of PVC+CS-3. In the “dry” process, the breaking limit grows from 36.72 MPa for PVC+to 38.26MPa in a sample of PVC+CD-3 with coating degree of 99.90%. Strenght limit also changes with coating degree (hydrophobization), while the strength force remains almost unchanged in both procedures.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor, Bor : Mining and Metallurgy Institute Bor",
journal = "47th International October Conference on Mining and Metallurgy",
title = "Influence of hidrofobized limestone as a filler on the mechanical properties of PVC",
pages = "24-21"
}
Mihajlović, S., Radulović, D., Sekulić, Ž., Jovanović, V.,& Kašić, V.. (2015). Influence of hidrofobized limestone as a filler on the mechanical properties of PVC. in 47th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 21-24.
Mihajlović S, Radulović D, Sekulić Ž, Jovanović V, Kašić V. Influence of hidrofobized limestone as a filler on the mechanical properties of PVC. in 47th International October Conference on Mining and Metallurgy. 2015;:21-24..
Mihajlović, Slavica, Radulović, Dragan, Sekulić, Živko, Jovanović, Vladimir, Kašić, Vladan, "Influence of hidrofobized limestone as a filler on the mechanical properties of PVC" in 47th International October Conference on Mining and Metallurgy (2015):21-24.
