The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
TY - JOUR
AU - Marković, Branislav
AU - Živković, D.
AU - Manasijević, Dragan
AU - Sokić, Miroslav
AU - Minić, Duško
AU - Talijan, Nadežda
AU - Stajić-Trosić, Jasna
PY - 2014
UR - https://ritnms.itnms.ac.rs/handle/123456789/325
AB - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB - Polish Acad Sciences Committee Metallurgy, Krakow
T2 - Archives of Metallurgy and Materials
T1 - Thermal, structural and electrical properties of some bi-cu-ni alloys
EP - 120
IS - 1
SP - 117
VL - 59
DO - 10.2478/amm-2014-0018
UR - conv_689
ER -
@article{
author = "Marković, Branislav and Živković, D. and Manasijević, Dragan and Sokić, Miroslav and Minić, Duško and Talijan, Nadežda and Stajić-Trosić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
pages = "120-117",
number = "1",
volume = "59",
doi = "10.2478/amm-2014-0018",
url = "conv_689"
}
Marković, B., Živković, D., Manasijević, D., Sokić, M., Minić, D., Talijan, N.,& Stajić-Trosić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018
conv_689
Marković B, Živković D, Manasijević D, Sokić M, Minić D, Talijan N, Stajić-Trosić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018
conv_689 .
Marković, Branislav, Živković, D., Manasijević, Dragan, Sokić, Miroslav, Minić, Duško, Talijan, Nadežda, Stajić-Trosić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 .,
conv_689 .
