Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.
TY - CONF
AU - Trumić, Maja
AU - Trumić, Milan
AU - Munćan, Nevena
AU - Radulović, Dragan
PY - 2017
UR - https://ritnms.itnms.ac.rs/handle/123456789/1066
AB - Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.
PB - Bor : University of Belgrade, Technical Faculty in Bor
C3 - XII International Symposium on recycling technologies and sustainable development
T1 - Flotation separation of thermal heat treated ABS and PS plastics
EP - 134
SP - 128
ER -
@conference{
author = "Trumić, Maja and Trumić, Milan and Munćan, Nevena and Radulović, Dragan",
year = "2017",
abstract = "Flotation is a process that can be used for separation primary and secondary materials. The paper presents the results of a laboratory study separation of plastics waste. The aim is to extract the PS plastic from the PS/ABS mixture. Experiments were carried out in Denver cell at pH 7 in presence of MIBC as frother. The plastics were thermal threated at 100ᵒ C in order to increase the hidrophilicity of ABS surface. The results showed that PS plastics has higher flotation rate constant value, but low quality value (under 90 %) for both plastics, indicates that ABS and PS could not be successfully separated by froth flotation and which is not the case in other manuscript. Obtained results were represent by the classical model of first-order to try to describe the kinetics of plastics flotation with good correlation coefficient.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Flotation separation of thermal heat treated ABS and PS plastics",
pages = "134-128"
}
Trumić, M., Trumić, M., Munćan, N.,& Radulović, D.. (2017). Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 128-134.
Trumić M, Trumić M, Munćan N, Radulović D. Flotation separation of thermal heat treated ABS and PS plastics. in XII International Symposium on recycling technologies and sustainable development. 2017;:128-134..
Trumić, Maja, Trumić, Milan, Munćan, Nevena, Radulović, Dragan, "Flotation separation of thermal heat treated ABS and PS plastics" in XII International Symposium on recycling technologies and sustainable development (2017):128-134.
