TY  - JOUR
AU  - Guzsvany, Valeria
AU  - Petrović, Jelena
AU  - Krstić, Jugoslav
AU  - Papp, Zsigmond
AU  - Putek, Maria
AU  - Bjelica, Luka
AU  - Bobrowski, Andrzej
AU  - Abramović, Biljana
PY  - 2013
UR  - https://ritnms.itnms.ac.rs/handle/123456789/250
AB  - A rapid and sensitive voltammetric method has been developed for the characterization and determination of the imidacloprid insecticide by means of square-wave voltammetry (SWV) with a silver-amalgam film electrode (Hg(Ag)FE) in the aqueous Britton-Robinson buffer solution as the supporting electrolyte. In the investigated pH range between 2.0 and 9.0 two reduction peaks of imidacloprid were observed, and they were both obtained in a fairly negative potential range, (approximately from -0.8 to -1.5 V). Their shape strongly depended on the pH of the supporting electrolyte. The analytical measurements, based on the first peak, were performed at the pH of 7.0, and imidacloprid was determined in the concentration range of 0.91-47.48 mu g cm(-3). The reproducibility of the analytical signal was characterized by a relative standard deviation smaller than 1.0%, and the calculated values of detection and quantitation limits were 0.27 mu g cm(-3) and 0.91 mu g cm(-3), respectively. The applicability of the elaborated SWV method was tested by monitoring imidacloprid concentration during its solar photolytic and photocatalytic degradation in the presence of two heterogeneous catalysts: TiO2 and TiO2 modified with 1.9% w/w Fe (1.9% Fe/TiO2). Under photolytic conditions, imidacloprid degraded very slowly, and the presence of TiO2 as a catalyst accelerated the process, while 1.9% Fe/TiO2 showed a remarkable efficiency in the removal of imidacloprid under natural insolation. In all investigated cases the results obtained using the Hg(Ag)FE-SWV method were in agreement with those obtained by means of the comparative HPLC-DAD method, which confirmed that the developed voltammetric method can be used to monitor the degradation of imidacloprid.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Electroanalytical Chemistry
T1  - Renewable silver-amalgam film electrode for voltammetric monitoring of solar photodegradation of imidacloprid in the presence of Fe/TiO2 and TiO2 catalysts
EP  - 39
SP  - 33
VL  - 699
DO  - 10.1016/j.jelechem.2013.04.003
UR  - conv_658
ER  - 

@article{
author = "Guzsvany, Valeria and Petrović, Jelena and Krstić, Jugoslav and Papp, Zsigmond and Putek, Maria and Bjelica, Luka and Bobrowski, Andrzej and Abramović, Biljana",
year = "2013",
abstract = "A rapid and sensitive voltammetric method has been developed for the characterization and determination of the imidacloprid insecticide by means of square-wave voltammetry (SWV) with a silver-amalgam film electrode (Hg(Ag)FE) in the aqueous Britton-Robinson buffer solution as the supporting electrolyte. In the investigated pH range between 2.0 and 9.0 two reduction peaks of imidacloprid were observed, and they were both obtained in a fairly negative potential range, (approximately from -0.8 to -1.5 V). Their shape strongly depended on the pH of the supporting electrolyte. The analytical measurements, based on the first peak, were performed at the pH of 7.0, and imidacloprid was determined in the concentration range of 0.91-47.48 mu g cm(-3). The reproducibility of the analytical signal was characterized by a relative standard deviation smaller than 1.0%, and the calculated values of detection and quantitation limits were 0.27 mu g cm(-3) and 0.91 mu g cm(-3), respectively. The applicability of the elaborated SWV method was tested by monitoring imidacloprid concentration during its solar photolytic and photocatalytic degradation in the presence of two heterogeneous catalysts: TiO2 and TiO2 modified with 1.9% w/w Fe (1.9% Fe/TiO2). Under photolytic conditions, imidacloprid degraded very slowly, and the presence of TiO2 as a catalyst accelerated the process, while 1.9% Fe/TiO2 showed a remarkable efficiency in the removal of imidacloprid under natural insolation. In all investigated cases the results obtained using the Hg(Ag)FE-SWV method were in agreement with those obtained by means of the comparative HPLC-DAD method, which confirmed that the developed voltammetric method can be used to monitor the degradation of imidacloprid.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Electroanalytical Chemistry",
title = "Renewable silver-amalgam film electrode for voltammetric monitoring of solar photodegradation of imidacloprid in the presence of Fe/TiO2 and TiO2 catalysts",
pages = "39-33",
volume = "699",
doi = "10.1016/j.jelechem.2013.04.003",
url = "conv_658"
}

Guzsvany, V., Petrović, J., Krstić, J., Papp, Z., Putek, M., Bjelica, L., Bobrowski, A.,& Abramović, B.. (2013). Renewable silver-amalgam film electrode for voltammetric monitoring of solar photodegradation of imidacloprid in the presence of Fe/TiO2 and TiO2 catalysts. in Journal of Electroanalytical Chemistry
Elsevier Science Sa, Lausanne., 699, 33-39.
https://doi.org/10.1016/j.jelechem.2013.04.003
conv_658

Guzsvany V, Petrović J, Krstić J, Papp Z, Putek M, Bjelica L, Bobrowski A, Abramović B. Renewable silver-amalgam film electrode for voltammetric monitoring of solar photodegradation of imidacloprid in the presence of Fe/TiO2 and TiO2 catalysts. in Journal of Electroanalytical Chemistry. 2013;699:33-39.
doi:10.1016/j.jelechem.2013.04.003
conv_658 .

Guzsvany, Valeria, Petrović, Jelena, Krstić, Jugoslav, Papp, Zsigmond, Putek, Maria, Bjelica, Luka, Bobrowski, Andrzej, Abramović, Biljana, "Renewable silver-amalgam film electrode for voltammetric monitoring of solar photodegradation of imidacloprid in the presence of Fe/TiO2 and TiO2 catalysts" in Journal of Electroanalytical Chemistry, 699 (2013):33-39,
https://doi.org/10.1016/j.jelechem.2013.04.003 .,
conv_658 .