TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1061
AB  - The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
T1  - Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy
EP  - 429
SP  - 423
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2019",
abstract = "The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling (XIII IMPRC) Conference",
title = "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy",
pages = "429-423"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2019). Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
Bor : University of Belgrade, Technical Faculty in Bor., 423-429.

Pavlović M, Dojčinović M, Andrić L, Radulović D, Petrov M. Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference. 2019;:423-429..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy" in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference (2019):423-429.

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Čeganjac, Zoran
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1062
AB  - The paper examines the cavitation resistance of the sintered basalt samples. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. Analyzing the progression of erosion samples of sintered basalt, it can be concluded that the mass loss is small, for 120 min exposure is 2,26 mg, with a cavitation rate of 0.02 mg/min and total surface damage of the sample surface of 15%. It has been shown that sintered basalt samples can be applied in conditions in which high cavitation loads are expected.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 51th International October Conference on Mining and Metallurgy
T1  - Determination of cavitation resistance of sintered basalt samples
EP  - 218
SP  - 215
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Čeganjac, Zoran",
year = "2019",
abstract = "The paper examines the cavitation resistance of the sintered basalt samples. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. Analyzing the progression of erosion samples of sintered basalt, it can be concluded that the mass loss is small, for 120 min exposure is 2,26 mg, with a cavitation rate of 0.02 mg/min and total surface damage of the sample surface of 15%. It has been shown that sintered basalt samples can be applied in conditions in which high cavitation loads are expected.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "51th International October Conference on Mining and Metallurgy",
title = "Determination of cavitation resistance of sintered basalt samples",
pages = "218-215"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Čeganjac, Z.. (2019). Determination of cavitation resistance of sintered basalt samples. in 51th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 215-218.

Pavlović M, Dojčinović M, Andrić L, Radulović D, Čeganjac Z. Determination of cavitation resistance of sintered basalt samples. in 51th International October Conference on Mining and Metallurgy. 2019;:215-218..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Čeganjac, Zoran, "Determination of cavitation resistance of sintered basalt samples" in 51th International October Conference on Mining and Metallurgy (2019):215-218.

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, M.
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/525
AB  - U radu je ispitivana otpornost na dejstvo kavitacije staklo-keramike na bazi bazalta. Ispitivane su dve vrste uzoraka: liveni i sinterovani uzorci na bazi bazalta. Kavitaciono erozioni test izveden je pomoću ultrazvučne vibracione metode sa stacionarnim uzorkom. Da bi se odredila kavitaciona otpornost praćena je promena mase uzoraka u funkciji vremena ispitivanja. Promena morfologije oštećenja površine uzoraka tokom ispitivanja praćena je skenirajućom elektronskom mikroskopijom. Nivo degradacije površine kvantifikovan je korišćenjem analize slike. Uzorci su ispitivani pod istim uslovima. Poređenje svojstava otpornosti na dejstvo kavitacije izvršeno je u odnosu na vrednosti kavitacionih brzina. Rezultati su pokazali visok stepen otpornosti ispitivanih uzoraka i mogućnost njihove primene u uslovima visokih kavitacionih opterećenja.
AB  - The paper examines the resistance to the effect of cavitation of glass-ceramics based on basalt. Two types of samples were investigated: cast and sintered samples based on basalt.The cavitation erosion test was performed using the ultrasonic vibratory method with a stationary sample. To measure the cavitation resistance, a change in sample mass in function of the cavitation time was monitored. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. The level of the surface degradation of the samples was quantified using the image analysis. Samples were tested under the same conditions. A comparison of the properties of the resistance to the effect of cavitation was performed in relation to the calculated cavitation rates. The results showed the high degree of cavitation resistance of the tested samples and the possibility of their application in conditions of high cavitation loads.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Journal of Mining and Metallurgy A: Mining
T1  - Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta
T1  - Comparison of the formation and development of cavitation damage on cast and sintered samples based on basalt
EP  - 44
IS  - 1
SP  - 37
VL  - 55
DO  - 10.5937/JMMA1901037P
UR  - conv_339
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, M. and Andrić, Ljubiša and Radulović, Dragan",
year = "2019",
abstract = "U radu je ispitivana otpornost na dejstvo kavitacije staklo-keramike na bazi bazalta. Ispitivane su dve vrste uzoraka: liveni i sinterovani uzorci na bazi bazalta. Kavitaciono erozioni test izveden je pomoću ultrazvučne vibracione metode sa stacionarnim uzorkom. Da bi se odredila kavitaciona otpornost praćena je promena mase uzoraka u funkciji vremena ispitivanja. Promena morfologije oštećenja površine uzoraka tokom ispitivanja praćena je skenirajućom elektronskom mikroskopijom. Nivo degradacije površine kvantifikovan je korišćenjem analize slike. Uzorci su ispitivani pod istim uslovima. Poređenje svojstava otpornosti na dejstvo kavitacije izvršeno je u odnosu na vrednosti kavitacionih brzina. Rezultati su pokazali visok stepen otpornosti ispitivanih uzoraka i mogućnost njihove primene u uslovima visokih kavitacionih opterećenja., The paper examines the resistance to the effect of cavitation of glass-ceramics based on basalt. Two types of samples were investigated: cast and sintered samples based on basalt.The cavitation erosion test was performed using the ultrasonic vibratory method with a stationary sample. To measure the cavitation resistance, a change in sample mass in function of the cavitation time was monitored. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. The level of the surface degradation of the samples was quantified using the image analysis. Samples were tested under the same conditions. A comparison of the properties of the resistance to the effect of cavitation was performed in relation to the calculated cavitation rates. The results showed the high degree of cavitation resistance of the tested samples and the possibility of their application in conditions of high cavitation loads.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Journal of Mining and Metallurgy A: Mining",
title = "Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta, Comparison of the formation and development of cavitation damage on cast and sintered samples based on basalt",
pages = "44-37",
number = "1",
volume = "55",
doi = "10.5937/JMMA1901037P",
url = "conv_339"
}

Pavlović, M., Dojčinović, M., Andrić, L.,& Radulović, D.. (2019). Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta. in Journal of Mining and Metallurgy A: Mining
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 55(1), 37-44.
https://doi.org/10.5937/JMMA1901037P
conv_339

Pavlović M, Dojčinović M, Andrić L, Radulović D. Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta. in Journal of Mining and Metallurgy A: Mining. 2019;55(1):37-44.
doi:10.5937/JMMA1901037P
conv_339 .

Pavlović, Marko, Dojčinović, M., Andrić, Ljubiša, Radulović, Dragan, "Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta" in Journal of Mining and Metallurgy A: Mining, 55, no. 1 (2019):37-44,
https://doi.org/10.5937/JMMA1901037P .,
conv_339 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Blagojev, Marina
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1060
AB  - This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
PB  - Bor : Mining and Metallurgy Institute Bor
C3  - 50th International October Conference on Mining and Metallurgy
T1  - Influence of the basalt structure and properties on development the cavitation damage
EP  - 158
SP  - 155
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Stojanović, Jovica and Radulović, Dragan and Petrov, Milan and Blagojev, Marina",
year = "2018",
abstract = "This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor, Bor : Mining and Metallurgy Institute Bor",
journal = "50th International October Conference on Mining and Metallurgy",
title = "Influence of the basalt structure and properties on development the cavitation damage",
pages = "158-155"
}

Pavlović, M., Dojčinović, M., Andrić, L., Stojanović, J., Radulović, D., Petrov, M.,& Blagojev, M.. (2018). Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 155-158.

Pavlović M, Dojčinović M, Andrić L, Stojanović J, Radulović D, Petrov M, Blagojev M. Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy. 2018;:155-158..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Stojanović, Jovica, Radulović, Dragan, Petrov, Milan, Blagojev, Marina, "Influence of the basalt structure and properties on development the cavitation damage" in 50th International October Conference on Mining and Metallurgy (2018):155-158.