TY  - CONF
AU  - Radulović, Dragan
AU  - Jovanović, Ivana
AU  - Todorović, Dejan
AU  - Jovanović, Vladimir
AU  - Ivošević, Branislav
AU  - Conić, Vesna
PY  - 2023
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1072
AB  - This paper describes a part of the experimental procedure for testing the performance of grinding media (steel balls) during the smelting slag milling, as well as the modeling procedure and model results that predict the consumption of balls under given experimental conditions. Firstly, the most suitable mineral raw material for testing the durability of the grinding media was defined. In laboratory conditions, it was determined that it is most expedient to use slag from the melting process of Pb-Zn concentrate for testing. The coarse moisture content was determined on the initial slag sample, while the particle size composition and Bond work index were determined on the crushed slag samples. In accordance with the characteristics of the raw material, the technical-technological parameters of the system for wet grinding of slag were defined, in which the balls durability test was performed. The obtained results showed that the consumption of grinding media is about 1 kg/t of slag. Six ANN models, developed on the basis of experimental results, showed good predictive abilities when it comes to stel balls consumption. As a result of modeling, high correlation coefficients were obtained, the value of which was about R = 0.99.
PB  - Belgrade : University of Belgrade, Faculty of Mining and Geology
C3  - IX International Conference Mining and Environmental Protection (MEP 23)
T1  - Testing of grinding media performances at the conditions of Pb-Zn smelting slag wet milling and prediction of balls consumption by ann-based models
EP  - 176
SP  - 170
ER  - 

@conference{
author = "Radulović, Dragan and Jovanović, Ivana and Todorović, Dejan and Jovanović, Vladimir and Ivošević, Branislav and Conić, Vesna",
year = "2023",
abstract = "This paper describes a part of the experimental procedure for testing the performance of grinding media (steel balls) during the smelting slag milling, as well as the modeling procedure and model results that predict the consumption of balls under given experimental conditions. Firstly, the most suitable mineral raw material for testing the durability of the grinding media was defined. In laboratory conditions, it was determined that it is most expedient to use slag from the melting process of Pb-Zn concentrate for testing. The coarse moisture content was determined on the initial slag sample, while the particle size composition and Bond work index were determined on the crushed slag samples. In accordance with the characteristics of the raw material, the technical-technological parameters of the system for wet grinding of slag were defined, in which the balls durability test was performed. The obtained results showed that the consumption of grinding media is about 1 kg/t of slag. Six ANN models, developed on the basis of experimental results, showed good predictive abilities when it comes to stel balls consumption. As a result of modeling, high correlation coefficients were obtained, the value of which was about R = 0.99.",
publisher = "Belgrade : University of Belgrade, Faculty of Mining and Geology",
journal = "IX International Conference Mining and Environmental Protection (MEP 23)",
title = "Testing of grinding media performances at the conditions of Pb-Zn smelting slag wet milling and prediction of balls consumption by ann-based models",
pages = "176-170"
}

Radulović, D., Jovanović, I., Todorović, D., Jovanović, V., Ivošević, B.,& Conić, V.. (2023). Testing of grinding media performances at the conditions of Pb-Zn smelting slag wet milling and prediction of balls consumption by ann-based models. in IX International Conference Mining and Environmental Protection (MEP 23)
Belgrade : University of Belgrade, Faculty of Mining and Geology., 170-176.

Radulović D, Jovanović I, Todorović D, Jovanović V, Ivošević B, Conić V. Testing of grinding media performances at the conditions of Pb-Zn smelting slag wet milling and prediction of balls consumption by ann-based models. in IX International Conference Mining and Environmental Protection (MEP 23). 2023;:170-176..

Radulović, Dragan, Jovanović, Ivana, Todorović, Dejan, Jovanović, Vladimir, Ivošević, Branislav, Conić, Vesna, "Testing of grinding media performances at the conditions of Pb-Zn smelting slag wet milling and prediction of balls consumption by ann-based models" in IX International Conference Mining and Environmental Protection (MEP 23) (2023):170-176.

TY  - JOUR
AU  - Milićević, Sonja
AU  - Vlahović, Milica
AU  - Kragović, Milan
AU  - Martinović, Sanja
AU  - Milošević, Vladan
AU  - Jovanović, Ivana
AU  - Stojmenović, Marija
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/536
AB  - The intent in this paper is to define how the batch equilibrium results of copper removal from a synthetic solution on natural zeolite can be used for prediction of the breakthrough curves in the fixed-bed system for both a synthetic solution and wastewater. Natural zeolite from the Vranjska Banja deposit, Serbia, has been fully characterized (XRD, chemical composition, DTA/TG, SEM/EDS) as a clinoptilolite with cation exchange capacity of 146 meq/100 g. The maximum adsorption capacity (q(m)) in the batch of the mono-component system (synthetic copper solution) obtained using the Langmuir isotherm model was 7.30 and 6.10 mg/g for particle size below 0.043 and 0.6-0.8 mm, respectively. Using the flow-through system with the 0.6-0.8 mm zeolite fixed-bed, almost double the adsorption capacity (11.2-12.2 mg/g) has been achieved in a saturation point for the copper removal from the synthetic solution, compared to the batch. Better results are attributed to the constant high concentration gradient in flow-through systems compared to the batch. The complex composition of wastewater and large amounts of earth alkaline metals disturb free adsorption sights on the zeolite surface. This results in a less effective adsorption in flow-through systems with adsorption capacity in breakthrough point of 5.84 mg/g (similar to 0.95 x qm) and in a saturation point of 7.10 mg/g (similar to 1.15 x qm).
PB  - MDPI, Basel
T2  - Minerals
T1  - Removal of Copper from Mining Wastewater Using Natural Raw Material-Comparative Study between the Synthetic and Natural Wastewater Samples
IS  - 9
VL  - 10
DO  - 10.3390/min10090753
UR  - conv_894
ER  - 

@article{
author = "Milićević, Sonja and Vlahović, Milica and Kragović, Milan and Martinović, Sanja and Milošević, Vladan and Jovanović, Ivana and Stojmenović, Marija",
year = "2020",
abstract = "The intent in this paper is to define how the batch equilibrium results of copper removal from a synthetic solution on natural zeolite can be used for prediction of the breakthrough curves in the fixed-bed system for both a synthetic solution and wastewater. Natural zeolite from the Vranjska Banja deposit, Serbia, has been fully characterized (XRD, chemical composition, DTA/TG, SEM/EDS) as a clinoptilolite with cation exchange capacity of 146 meq/100 g. The maximum adsorption capacity (q(m)) in the batch of the mono-component system (synthetic copper solution) obtained using the Langmuir isotherm model was 7.30 and 6.10 mg/g for particle size below 0.043 and 0.6-0.8 mm, respectively. Using the flow-through system with the 0.6-0.8 mm zeolite fixed-bed, almost double the adsorption capacity (11.2-12.2 mg/g) has been achieved in a saturation point for the copper removal from the synthetic solution, compared to the batch. Better results are attributed to the constant high concentration gradient in flow-through systems compared to the batch. The complex composition of wastewater and large amounts of earth alkaline metals disturb free adsorption sights on the zeolite surface. This results in a less effective adsorption in flow-through systems with adsorption capacity in breakthrough point of 5.84 mg/g (similar to 0.95 x qm) and in a saturation point of 7.10 mg/g (similar to 1.15 x qm).",
publisher = "MDPI, Basel",
journal = "Minerals",
title = "Removal of Copper from Mining Wastewater Using Natural Raw Material-Comparative Study between the Synthetic and Natural Wastewater Samples",
number = "9",
volume = "10",
doi = "10.3390/min10090753",
url = "conv_894"
}

Milićević, S., Vlahović, M., Kragović, M., Martinović, S., Milošević, V., Jovanović, I.,& Stojmenović, M.. (2020). Removal of Copper from Mining Wastewater Using Natural Raw Material-Comparative Study between the Synthetic and Natural Wastewater Samples. in Minerals
MDPI, Basel., 10(9).
https://doi.org/10.3390/min10090753
conv_894

Milićević S, Vlahović M, Kragović M, Martinović S, Milošević V, Jovanović I, Stojmenović M. Removal of Copper from Mining Wastewater Using Natural Raw Material-Comparative Study between the Synthetic and Natural Wastewater Samples. in Minerals. 2020;10(9).
doi:10.3390/min10090753
conv_894 .

Milićević, Sonja, Vlahović, Milica, Kragović, Milan, Martinović, Sanja, Milošević, Vladan, Jovanović, Ivana, Stojmenović, Marija, "Removal of Copper from Mining Wastewater Using Natural Raw Material-Comparative Study between the Synthetic and Natural Wastewater Samples" in Minerals, 10, no. 9 (2020),
https://doi.org/10.3390/min10090753 .,
conv_894 .

TY  - JOUR
AU  - Jovanović, Ivana
AU  - Ljubojev, Milenko
AU  - Milošević, Vladan
AU  - Todorović, Dejan
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/391
AB  - This paper presents the results of a part of technological tests, whose aim was to determine the optimum techno-economic conditions for the flotation concentration of ore from the deposit Tenka-3 - North Mining District, Copper Mine Majdanpek. The given view refers to testing the effects of collectors NaIPX, 3418 A and 5500 AP, as well as the pulp pH value on the quality of concentrate from the primary flotation process. It was found that the majority of copper, gold and silver in the primary concentrate is obtained using the collector AP 5500. In addition, a better quality of primary concentrate was obtained at higher pH values of pulp in the tested pH range (10.0 - 11.5).
PB  - Institut za rudarstvo i metalurgiju, Bor
T2  - Mining and Metallurgy Engineering Bor
T1  - The effect of different collectors on the quality of basic copper concentrate of the ore body Tenka
EP  - 30
IS  - 2
SP  - 25
DO  - 10.5937/MMEB1602025J
UR  - conv_422
ER  - 

@article{
author = "Jovanović, Ivana and Ljubojev, Milenko and Milošević, Vladan and Todorović, Dejan",
year = "2016",
abstract = "This paper presents the results of a part of technological tests, whose aim was to determine the optimum techno-economic conditions for the flotation concentration of ore from the deposit Tenka-3 - North Mining District, Copper Mine Majdanpek. The given view refers to testing the effects of collectors NaIPX, 3418 A and 5500 AP, as well as the pulp pH value on the quality of concentrate from the primary flotation process. It was found that the majority of copper, gold and silver in the primary concentrate is obtained using the collector AP 5500. In addition, a better quality of primary concentrate was obtained at higher pH values of pulp in the tested pH range (10.0 - 11.5).",
publisher = "Institut za rudarstvo i metalurgiju, Bor",
journal = "Mining and Metallurgy Engineering Bor",
title = "The effect of different collectors on the quality of basic copper concentrate of the ore body Tenka",
pages = "30-25",
number = "2",
doi = "10.5937/MMEB1602025J",
url = "conv_422"
}

Jovanović, I., Ljubojev, M., Milošević, V.,& Todorović, D.. (2016). The effect of different collectors on the quality of basic copper concentrate of the ore body Tenka. in Mining and Metallurgy Engineering Bor
Institut za rudarstvo i metalurgiju, Bor.(2), 25-30.
https://doi.org/10.5937/MMEB1602025J
conv_422

Jovanović I, Ljubojev M, Milošević V, Todorović D. The effect of different collectors on the quality of basic copper concentrate of the ore body Tenka. in Mining and Metallurgy Engineering Bor. 2016;(2):25-30.
doi:10.5937/MMEB1602025J
conv_422 .

Jovanović, Ivana, Ljubojev, Milenko, Milošević, Vladan, Todorović, Dejan, "The effect of different collectors on the quality of basic copper concentrate of the ore body Tenka" in Mining and Metallurgy Engineering Bor, no. 2 (2016):25-30,
https://doi.org/10.5937/MMEB1602025J .,
conv_422 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Andrić, Ljubiša
AU  - Milošević, Vladan
AU  - Todorović, Dejan
AU  - Bartulović, Zoran
AU  - Mikić, Miomir
PY  - 2015
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1112
AB  - The results shown in this paper represent a part of technological testings performed to evaluate the possibility of copper and precious metals valorization from ore deposit Tenka 3. Concentration of useful minerals was achieved through flotation method including rougher and scavenger circuits. During the experimental procedure AEROPHINE 3418A Promoter (phosphine- based collector) and AERO 5500 Promoter (ethoxycarbonyl thiourea based collector) were used for the hydrophobization of mineral surfaces. pH value of flotation pulp was 10.5 in every experiment. Grinding fineness varied from 56% to 65% of class –0.074 mm. The highest recoveries of copper and precious metals are obtained at grinding fineness of 60% –0.074 mm, while the highest grades are obtained at grinding fineness of 56% –0.074 mm.
PB  - Belgrade : Mining Institute Belgrade
C3  - XVI Balkan Mineral Processing Congress
T1  - Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness
EP  - 468
SP  - 465
ER  - 

@conference{
author = "Jovanović, Ivana and Andrić, Ljubiša and Milošević, Vladan and Todorović, Dejan and Bartulović, Zoran and Mikić, Miomir",
year = "2015",
abstract = "The results shown in this paper represent a part of technological testings performed to evaluate the possibility of copper and precious metals valorization from ore deposit Tenka 3. Concentration of useful minerals was achieved through flotation method including rougher and scavenger circuits. During the experimental procedure AEROPHINE 3418A Promoter (phosphine- based collector) and AERO 5500 Promoter (ethoxycarbonyl thiourea based collector) were used for the hydrophobization of mineral surfaces. pH value of flotation pulp was 10.5 in every experiment. Grinding fineness varied from 56% to 65% of class –0.074 mm. The highest recoveries of copper and precious metals are obtained at grinding fineness of 60% –0.074 mm, while the highest grades are obtained at grinding fineness of 56% –0.074 mm.",
publisher = "Belgrade : Mining Institute Belgrade",
journal = "XVI Balkan Mineral Processing Congress",
title = "Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness",
pages = "468-465"
}

Jovanović, I., Andrić, L., Milošević, V., Todorović, D., Bartulović, Z.,& Mikić, M.. (2015). Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness. in XVI Balkan Mineral Processing Congress
Belgrade : Mining Institute Belgrade., 465-468.

Jovanović I, Andrić L, Milošević V, Todorović D, Bartulović Z, Mikić M. Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness. in XVI Balkan Mineral Processing Congress. 2015;:465-468..

Jovanović, Ivana, Andrić, Ljubiša, Milošević, Vladan, Todorović, Dejan, Bartulović, Zoran, Mikić, Miomir, "Recovery of copper, gold and silver from ore deposit Tenka-3 in dependence on grinding fineness" in XVI Balkan Mineral Processing Congress (2015):465-468.

TY  - JOUR
AU  - Jovanović, Ivana
AU  - Todorović, Dejan
AU  - Miljanović, Igor
AU  - Urošević, Daniela
AU  - Magdalinović, Srđana
AU  - Krstić, Slađana
PY  - 2013
UR  - https://ritnms.itnms.ac.rs/handle/123456789/282
AB  - Cilj istraživanja čiji su rezultati prikazani u ovom radu bio je da se utvrdi zavisnost tehnoloških pokazatelja flotacijske koncentracije bakra od finoće mlevenja rude iz ležišta 'Veliki Krivelj', kao i da se ustanovi korelacija između iskorišćenja i sadržaja bakra u koncentratu. U toku ispitivanja procentualna masena učešća klase -0,074 mm iznosila su 58%, 60% i 65%. Na osnovu dobijenih rezultata utvrđeno je da se najveća iskorišćenja postižu pri finoći mlevenja od 65% -0,074 mm, dok je najbolji kvalitet koncentrata ostvaren pri finoći mlevenja od 60% -0,074mm. Međusobna zavisnost iskorišćenja i sadržaja bakra u koncentratu koji su dobijeni u ovim ispitivanjima može se prikazati polinomnom funkcijom trećeg stepena.
AB  - The aim of the research whose results are presented in this paper was to determine the dependence of technological indicators of copper flotation on grinding fineness of ore from the deposit 'Veliki Krivelj', as well as to establish concentrate grade-recovery correlation. During this testing, the percentage mass share of class -0.074 mm was 58%, 60% and 65%, respectively. On the basis of the obtained results, it was found that the highest recovery of copper was achieved at grinding fineness of 65% -0.074 mm, and the best quality of concentrate at grinding fineness of 60% -0.074 mm. Interdependence of copper concentrate grade and recovery can be presented by polynomial function of the third degree, in this case.
PB  - Institut za bakar, Bor
T2  - Bakar
T1  - Korelacija između sadržaja i iskorišćenja bakra u flotacijskom koncentratu iz pogona 'Veliki Krivelj' u funkciji finoće mlevenja
T1  - Correlation between grade and recovery of copper concentrate from 'Veliki Krivelj' flotation plant in the function of grinding fineness
EP  - 54
IS  - 2
SP  - 45
VL  - 38
UR  - conv_119
ER  - 

@article{
author = "Jovanović, Ivana and Todorović, Dejan and Miljanović, Igor and Urošević, Daniela and Magdalinović, Srđana and Krstić, Slađana",
year = "2013",
abstract = "Cilj istraživanja čiji su rezultati prikazani u ovom radu bio je da se utvrdi zavisnost tehnoloških pokazatelja flotacijske koncentracije bakra od finoće mlevenja rude iz ležišta 'Veliki Krivelj', kao i da se ustanovi korelacija između iskorišćenja i sadržaja bakra u koncentratu. U toku ispitivanja procentualna masena učešća klase -0,074 mm iznosila su 58%, 60% i 65%. Na osnovu dobijenih rezultata utvrđeno je da se najveća iskorišćenja postižu pri finoći mlevenja od 65% -0,074 mm, dok je najbolji kvalitet koncentrata ostvaren pri finoći mlevenja od 60% -0,074mm. Međusobna zavisnost iskorišćenja i sadržaja bakra u koncentratu koji su dobijeni u ovim ispitivanjima može se prikazati polinomnom funkcijom trećeg stepena., The aim of the research whose results are presented in this paper was to determine the dependence of technological indicators of copper flotation on grinding fineness of ore from the deposit 'Veliki Krivelj', as well as to establish concentrate grade-recovery correlation. During this testing, the percentage mass share of class -0.074 mm was 58%, 60% and 65%, respectively. On the basis of the obtained results, it was found that the highest recovery of copper was achieved at grinding fineness of 65% -0.074 mm, and the best quality of concentrate at grinding fineness of 60% -0.074 mm. Interdependence of copper concentrate grade and recovery can be presented by polynomial function of the third degree, in this case.",
publisher = "Institut za bakar, Bor",
journal = "Bakar",
title = "Korelacija između sadržaja i iskorišćenja bakra u flotacijskom koncentratu iz pogona 'Veliki Krivelj' u funkciji finoće mlevenja, Correlation between grade and recovery of copper concentrate from 'Veliki Krivelj' flotation plant in the function of grinding fineness",
pages = "54-45",
number = "2",
volume = "38",
url = "conv_119"
}

Jovanović, I., Todorović, D., Miljanović, I., Urošević, D., Magdalinović, S.,& Krstić, S.. (2013). Korelacija između sadržaja i iskorišćenja bakra u flotacijskom koncentratu iz pogona 'Veliki Krivelj' u funkciji finoće mlevenja. in Bakar
Institut za bakar, Bor., 38(2), 45-54.
conv_119

Jovanović I, Todorović D, Miljanović I, Urošević D, Magdalinović S, Krstić S. Korelacija između sadržaja i iskorišćenja bakra u flotacijskom koncentratu iz pogona 'Veliki Krivelj' u funkciji finoće mlevenja. in Bakar. 2013;38(2):45-54.
conv_119 .

Jovanović, Ivana, Todorović, Dejan, Miljanović, Igor, Urošević, Daniela, Magdalinović, Srđana, Krstić, Slađana, "Korelacija između sadržaja i iskorišćenja bakra u flotacijskom koncentratu iz pogona 'Veliki Krivelj' u funkciji finoće mlevenja" in Bakar, 38, no. 2 (2013):45-54,
conv_119 .

TY  - JOUR
AU  - Jovanović, Ivana
AU  - Todorović, Dejan
AU  - Andrić, Ljubiša
PY  - 2012
UR  - https://ritnms.itnms.ac.rs/handle/123456789/243
AB  - U ovom radu prikazan je deo tehnoloških ispitivanja koja su obavljena sa ciljem definisanja optimalnih uslova flotacijske koncentracije rude ležišta Tenka 3 - Severni revir, rudnika bakra Majdanpek. Dati prikaz odnosi se na ispitivanje uticaja kolektora NaIPX, 3418A i AP5500 kao i pH vrednosti pulpe na pojedine tehnološke pokazatelje (iskorišćenja bakra i plemenitih metala) procesa osnovnog flotiranja. Utvrđeno je da se generalno najbolja iskorišćenja bakra i zlata u osnovnom koncentratu bakra postižu primenom kombinacije kolektora 3418A i AP5500, dok se najbolja iskorišćenja srebra u osnovnom koncentratu bakra postižu primenom natrijum izopropil ksantata. Pored toga, veća iskorišćenja zlata i srebra dobijena su pri nižim pH vrednostima pulpe, dok, s druge strane, nije uočena jasna zavisnost iskorišćenja bakra od pH vrednosti pulpe u ispitivanom opsegu pH (10,0 - 11,5).
AB  - This work presents a part of technological testing that were conducted in order to define the optimum conditions of flotation concentration of the ore from the deposit Tenka 3 - North Mining District, Majdanpek copper mine. Provided description refers to testing the effect of collectors NaIPX, 3418 and AP5500 as well as the pH value of pulp to the certain technical indicators (recovery of copper and precious metals) of the rough flotation process. It was found that generally the best recoveries of copper and gold in the basic copper concentrate are obtained using a combination of collectors 3418 and AP5500, while the best silver recovery in the basic copper concentrate is obtained using the sodium isopropyl xanthate. In addition, higher recoveries of gold and silver were obtained at lower pH value of pulp, while, on the other hand, a clear dependence of copper recovery on pH value was not observed in tested pH range (10.0 to 11.5).
PB  - Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica
T2  - Rudarski radovi, Bor
T1  - Uticaj različitih kolektora na iskorišćenje bakra i plemenitih metala rudnog tela Tenka 3
T1  - The effect of different collectors on recovery of copper and precious metals of the ore body Tenka 3
EP  - 234
IS  - 3
SP  - 223
DO  - 10.5937/rudrad1203223J
UR  - conv_366
ER  - 

@article{
author = "Jovanović, Ivana and Todorović, Dejan and Andrić, Ljubiša",
year = "2012",
abstract = "U ovom radu prikazan je deo tehnoloških ispitivanja koja su obavljena sa ciljem definisanja optimalnih uslova flotacijske koncentracije rude ležišta Tenka 3 - Severni revir, rudnika bakra Majdanpek. Dati prikaz odnosi se na ispitivanje uticaja kolektora NaIPX, 3418A i AP5500 kao i pH vrednosti pulpe na pojedine tehnološke pokazatelje (iskorišćenja bakra i plemenitih metala) procesa osnovnog flotiranja. Utvrđeno je da se generalno najbolja iskorišćenja bakra i zlata u osnovnom koncentratu bakra postižu primenom kombinacije kolektora 3418A i AP5500, dok se najbolja iskorišćenja srebra u osnovnom koncentratu bakra postižu primenom natrijum izopropil ksantata. Pored toga, veća iskorišćenja zlata i srebra dobijena su pri nižim pH vrednostima pulpe, dok, s druge strane, nije uočena jasna zavisnost iskorišćenja bakra od pH vrednosti pulpe u ispitivanom opsegu pH (10,0 - 11,5)., This work presents a part of technological testing that were conducted in order to define the optimum conditions of flotation concentration of the ore from the deposit Tenka 3 - North Mining District, Majdanpek copper mine. Provided description refers to testing the effect of collectors NaIPX, 3418 and AP5500 as well as the pH value of pulp to the certain technical indicators (recovery of copper and precious metals) of the rough flotation process. It was found that generally the best recoveries of copper and gold in the basic copper concentrate are obtained using a combination of collectors 3418 and AP5500, while the best silver recovery in the basic copper concentrate is obtained using the sodium isopropyl xanthate. In addition, higher recoveries of gold and silver were obtained at lower pH value of pulp, while, on the other hand, a clear dependence of copper recovery on pH value was not observed in tested pH range (10.0 to 11.5).",
publisher = "Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica",
journal = "Rudarski radovi, Bor",
title = "Uticaj različitih kolektora na iskorišćenje bakra i plemenitih metala rudnog tela Tenka 3, The effect of different collectors on recovery of copper and precious metals of the ore body Tenka 3",
pages = "234-223",
number = "3",
doi = "10.5937/rudrad1203223J",
url = "conv_366"
}

Jovanović, I., Todorović, D.,& Andrić, L.. (2012). Uticaj različitih kolektora na iskorišćenje bakra i plemenitih metala rudnog tela Tenka 3. in Rudarski radovi, Bor
Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica.(3), 223-234.
https://doi.org/10.5937/rudrad1203223J
conv_366

Jovanović I, Todorović D, Andrić L. Uticaj različitih kolektora na iskorišćenje bakra i plemenitih metala rudnog tela Tenka 3. in Rudarski radovi, Bor. 2012;(3):223-234.
doi:10.5937/rudrad1203223J
conv_366 .

Jovanović, Ivana, Todorović, Dejan, Andrić, Ljubiša, "Uticaj različitih kolektora na iskorišćenje bakra i plemenitih metala rudnog tela Tenka 3" in Rudarski radovi, Bor, no. 3 (2012):223-234,
https://doi.org/10.5937/rudrad1203223J .,
conv_366 .