TY  - JOUR
AU  - Mombelli, Davide
AU  - Mapelli, Carlo
AU  - Dall’Osto, Gianluca
AU  - Tavčar, Gašper
AU  - Kocijančić, Robert
AU  - Radulović, Dragan
AU  - Ristović, Ivica
AU  - Ciszewski, Mateusz
AU  - Kastivnik, Jasna
AU  - Mladenovič, Ana
AU  - Mauko Pranjić, Alenka
AU  - Košir, Mateja
PY  - 2024
UR  - https://www.aimnet.it/la_metallurgia_italiana/2024/marzo/01.pdf
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1247
AB  - Every year around 1.2 Mt of Electric Arc Furnace (EAF) dust and around 50 kt of Cupola Furnace (CF) dusts are generated
in Europe. Both materials are classified as hazardous waste due to significant concentration of Zn, Cd, Cr, Ni and Pb, which burden the metallurgical industry, albeit their possibility to be considered as an alternative source of valuable metals. Around 30 steelworks in the East-Southeast European Regional Innovation Scheme (ESEE RIS) region exploit EAFs for scrap-based steelmaking. However, the dusts generated from the exhaust gases abatement cannot be profitably recycled due to the absence of recycling plants operating in these areas, which implies that the dust generators have additional costs due to the dust ransportation to the nearest Zn recovery plant, since presence of toxic substances prohibits their landfilling. Thanks to the extensive knowledge on the extraction of a wide range of compounds from steelmaking dusts, as well as the capacity of reutilisation of residues after extraction in the building and construction industry, the DustRec project aims at the recovery of all the economical compounds within the dusts (Zn, Pb, Cu, Fe and others) hence minimizing the final waste landfilling and generate an economically feasible process with improved environmental and societal impacts. The proposed approach includes several emerging techniques from innovative magnetic and gravity separation methods to new pyro- and hydro-metallurgical reprocessing technologies for the separated fractions. In this paper, eight different dusts from EAF and CF were collected all around the partners’ countries and chemically, thermally and physically characterized in order to select the most optimal samples to be reprocessed for improved valuable extractions. Due to their high concentration of ZnO and PbO, three EAF dusts were identified as promising raw materials while two CF dusts will be employed as co-adjuvant for magnetic
fraction reduction and smelting. Preliminary hints about the next reprocessing steps are also revealed.
PB  - Milano :  International Journal of the Italian Association for Metallurgy
T2  - La Metallurgia Italiana
T1  - EIT Raw Materials RIS-DUSTREC: investigation and selection of furnace dust samples for valuable metals recovery
EP  - 23
IS  - 3
SP  - 8
VL  - 115
ER  - 

@article{
author = "Mombelli, Davide and Mapelli, Carlo and Dall’Osto, Gianluca and Tavčar, Gašper and Kocijančić, Robert and Radulović, Dragan and Ristović, Ivica and Ciszewski, Mateusz and Kastivnik, Jasna and Mladenovič, Ana and Mauko Pranjić, Alenka and Košir, Mateja",
year = "2024",
abstract = "Every year around 1.2 Mt of Electric Arc Furnace (EAF) dust and around 50 kt of Cupola Furnace (CF) dusts are generated
in Europe. Both materials are classified as hazardous waste due to significant concentration of Zn, Cd, Cr, Ni and Pb, which burden the metallurgical industry, albeit their possibility to be considered as an alternative source of valuable metals. Around 30 steelworks in the East-Southeast European Regional Innovation Scheme (ESEE RIS) region exploit EAFs for scrap-based steelmaking. However, the dusts generated from the exhaust gases abatement cannot be profitably recycled due to the absence of recycling plants operating in these areas, which implies that the dust generators have additional costs due to the dust ransportation to the nearest Zn recovery plant, since presence of toxic substances prohibits their landfilling. Thanks to the extensive knowledge on the extraction of a wide range of compounds from steelmaking dusts, as well as the capacity of reutilisation of residues after extraction in the building and construction industry, the DustRec project aims at the recovery of all the economical compounds within the dusts (Zn, Pb, Cu, Fe and others) hence minimizing the final waste landfilling and generate an economically feasible process with improved environmental and societal impacts. The proposed approach includes several emerging techniques from innovative magnetic and gravity separation methods to new pyro- and hydro-metallurgical reprocessing technologies for the separated fractions. In this paper, eight different dusts from EAF and CF were collected all around the partners’ countries and chemically, thermally and physically characterized in order to select the most optimal samples to be reprocessed for improved valuable extractions. Due to their high concentration of ZnO and PbO, three EAF dusts were identified as promising raw materials while two CF dusts will be employed as co-adjuvant for magnetic
fraction reduction and smelting. Preliminary hints about the next reprocessing steps are also revealed.",
publisher = "Milano :  International Journal of the Italian Association for Metallurgy",
journal = "La Metallurgia Italiana",
title = "EIT Raw Materials RIS-DUSTREC: investigation and selection of furnace dust samples for valuable metals recovery",
pages = "23-8",
number = "3",
volume = "115"
}

Mombelli, D., Mapelli, C., Dall’Osto, G., Tavčar, G., Kocijančić, R., Radulović, D., Ristović, I., Ciszewski, M., Kastivnik, J., Mladenovič, A., Mauko Pranjić, A.,& Košir, M.. (2024). EIT Raw Materials RIS-DUSTREC: investigation and selection of furnace dust samples for valuable metals recovery. in La Metallurgia Italiana
Milano :  International Journal of the Italian Association for Metallurgy., 115(3), 8-23.

Mombelli D, Mapelli C, Dall’Osto G, Tavčar G, Kocijančić R, Radulović D, Ristović I, Ciszewski M, Kastivnik J, Mladenovič A, Mauko Pranjić A, Košir M. EIT Raw Materials RIS-DUSTREC: investigation and selection of furnace dust samples for valuable metals recovery. in La Metallurgia Italiana. 2024;115(3):8-23..

Mombelli, Davide, Mapelli, Carlo, Dall’Osto, Gianluca, Tavčar, Gašper, Kocijančić, Robert, Radulović, Dragan, Ristović, Ivica, Ciszewski, Mateusz, Kastivnik, Jasna, Mladenovič, Ana, Mauko Pranjić, Alenka, Košir, Mateja, "EIT Raw Materials RIS-DUSTREC: investigation and selection of furnace dust samples for valuable metals recovery" in La Metallurgia Italiana, 115, no. 3 (2024):8-23.

TY  - CONF
AU  - Radulović, Dragan
AU  - Ristović, Ivica
AU  - Tavčar, Gašper
AU  - Mombelli, Davide
AU  - Jovanović, Vladimir
AU  - Todorović, Dejan
AU  - Ivošević, Branislav
PY  - 2023
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1192
AB  - Velike količine prašine iz EAF peći se stvaraju u Evropi (1,3Mt), kao i u svetu (8,764Mt). Zbog visokog sadržaja Fe i Zn, čiji sadržaj često dostiže ukupno između 50 i 60 tež.%, EAF prašina je oduvek bila interesantna za reciklažu. Do sada, najčešće primenjivana metoda prerade EAF prašine je pirometalurški proces ekstrakcije Zn u Waelz pećima (85% tržišnog učešća). U radu je predstavlјen EIT Raw Materials projekat: RIS-DustRec-II, koji ima za cilј razvoj inovativnih tehnologija za odvajanje, ponovnu obradu i korisnu upotrebu svih komponenti EAF i CF prašine iz peći, kako bi se smanjila količina toksičnog otpada i postigla nulta vrednost. –što je cilj za otpad u EU. Urađene su I predstavlјene hemijske, XRD i SEM analize na dva odabrana uzorka prašine EAF i CF peći iz Italije.
PB  - Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet
C3  - X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina
T1  - EU pojekti - Mogućnost i šansa za uključivanje i angažman naučnih kadrova iz geologije i rudarstva (posebno PMS-struke). sa osvrtom na projekat RIS-DUSTREC-II NO 22009 iz oblasti Eit Raw Materials (sekundarnih sirovina)
EP  - 179
SP  - 168
ER  - 

@conference{
author = "Radulović, Dragan and Ristović, Ivica and Tavčar, Gašper and Mombelli, Davide and Jovanović, Vladimir and Todorović, Dejan and Ivošević, Branislav",
year = "2023",
abstract = "Velike količine prašine iz EAF peći se stvaraju u Evropi (1,3Mt), kao i u svetu (8,764Mt). Zbog visokog sadržaja Fe i Zn, čiji sadržaj često dostiže ukupno između 50 i 60 tež.%, EAF prašina je oduvek bila interesantna za reciklažu. Do sada, najčešće primenjivana metoda prerade EAF prašine je pirometalurški proces ekstrakcije Zn u Waelz pećima (85% tržišnog učešća). U radu je predstavlјen EIT Raw Materials projekat: RIS-DustRec-II, koji ima za cilј razvoj inovativnih tehnologija za odvajanje, ponovnu obradu i korisnu upotrebu svih komponenti EAF i CF prašine iz peći, kako bi se smanjila količina toksičnog otpada i postigla nulta vrednost. –što je cilj za otpad u EU. Urađene su I predstavlјene hemijske, XRD i SEM analize na dva odabrana uzorka prašine EAF i CF peći iz Italije.",
publisher = "Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet",
journal = "X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina",
title = "EU pojekti - Mogućnost i šansa za uključivanje i angažman naučnih kadrova iz geologije i rudarstva (posebno PMS-struke). sa osvrtom na projekat RIS-DUSTREC-II NO 22009 iz oblasti Eit Raw Materials (sekundarnih sirovina)",
pages = "179-168"
}

Radulović, D., Ristović, I., Tavčar, G., Mombelli, D., Jovanović, V., Todorović, D.,& Ivošević, B.. (2023). EU pojekti - Mogućnost i šansa za uključivanje i angažman naučnih kadrova iz geologije i rudarstva (posebno PMS-struke). sa osvrtom na projekat RIS-DUSTREC-II NO 22009 iz oblasti Eit Raw Materials (sekundarnih sirovina). in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina
Beograd : Univerzitet u Beogradu, Rudarsko-geološki fakultet., 168-179.

Radulović D, Ristović I, Tavčar G, Mombelli D, Jovanović V, Todorović D, Ivošević B. EU pojekti - Mogućnost i šansa za uključivanje i angažman naučnih kadrova iz geologije i rudarstva (posebno PMS-struke). sa osvrtom na projekat RIS-DUSTREC-II NO 22009 iz oblasti Eit Raw Materials (sekundarnih sirovina). in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina. 2023;:168-179..

Radulović, Dragan, Ristović, Ivica, Tavčar, Gašper, Mombelli, Davide, Jovanović, Vladimir, Todorović, Dejan, Ivošević, Branislav, "EU pojekti - Mogućnost i šansa za uključivanje i angažman naučnih kadrova iz geologije i rudarstva (posebno PMS-struke). sa osvrtom na projekat RIS-DUSTREC-II NO 22009 iz oblasti Eit Raw Materials (sekundarnih sirovina)" in X Kolokvijum o pripremi mineralnih sirovina, Katedra za pripremu mineralnih sirovina (2023):168-179.

TY  - CONF
AU  - Tavčar, Gašper
AU  - Mombelli, Davide
AU  - Ristović, Ivica
AU  - Radulović, Dragan
PY  - 2023
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1111
AB  - Large amounts of EAF furnace dust are generated in Europe (1.3Mt), as well as in the world (8,764Mt). Due to the high content of Fe and Zn, whose content often reaches a total of between 50 and 60 wt.%, EAF dust has always been interesting for recycling. So far, the most commonly applied method of processing EAF dust is the pyrometallurgical Waelz kiln process of Zn extraction (85% market share). The paper presents EIT Raw Materials Project: RIS-DustRec-II, which aims to develop innovative technologies for the separation, reprocessing, and beneficial use of all components of EAF and CF furnace dust, to reduce the amount of toxic waste and achieve the zero-waste target in the EU. Preliminary chemical, XRD, and SEM analyses on two samples of EAF and CF furnace dust from Italy were performed and presented.
PB  - Belgrade : University of Belgrade, Faculty of Mining and Geology
C3  - IX International Conference Mining and Environmental Protection (MEP 23)
T1  - Preliminary physical-chemical and mineralogical characterization of furnace dust samples, the basis for the selection of samples for research within the project EIT Raw Materials ris-dustrec-ii no 22009
EP  - 29
SP  - 21
ER  - 

@conference{
author = "Tavčar, Gašper and Mombelli, Davide and Ristović, Ivica and Radulović, Dragan",
year = "2023",
abstract = "Large amounts of EAF furnace dust are generated in Europe (1.3Mt), as well as in the world (8,764Mt). Due to the high content of Fe and Zn, whose content often reaches a total of between 50 and 60 wt.%, EAF dust has always been interesting for recycling. So far, the most commonly applied method of processing EAF dust is the pyrometallurgical Waelz kiln process of Zn extraction (85% market share). The paper presents EIT Raw Materials Project: RIS-DustRec-II, which aims to develop innovative technologies for the separation, reprocessing, and beneficial use of all components of EAF and CF furnace dust, to reduce the amount of toxic waste and achieve the zero-waste target in the EU. Preliminary chemical, XRD, and SEM analyses on two samples of EAF and CF furnace dust from Italy were performed and presented.",
publisher = "Belgrade : University of Belgrade, Faculty of Mining and Geology",
journal = "IX International Conference Mining and Environmental Protection (MEP 23)",
title = "Preliminary physical-chemical and mineralogical characterization of furnace dust samples, the basis for the selection of samples for research within the project EIT Raw Materials ris-dustrec-ii no 22009",
pages = "29-21"
}

Tavčar, G., Mombelli, D., Ristović, I.,& Radulović, D.. (2023). Preliminary physical-chemical and mineralogical characterization of furnace dust samples, the basis for the selection of samples for research within the project EIT Raw Materials ris-dustrec-ii no 22009. in IX International Conference Mining and Environmental Protection (MEP 23)
Belgrade : University of Belgrade, Faculty of Mining and Geology., 21-29.

Tavčar G, Mombelli D, Ristović I, Radulović D. Preliminary physical-chemical and mineralogical characterization of furnace dust samples, the basis for the selection of samples for research within the project EIT Raw Materials ris-dustrec-ii no 22009. in IX International Conference Mining and Environmental Protection (MEP 23). 2023;:21-29..

Tavčar, Gašper, Mombelli, Davide, Ristović, Ivica, Radulović, Dragan, "Preliminary physical-chemical and mineralogical characterization of furnace dust samples, the basis for the selection of samples for research within the project EIT Raw Materials ris-dustrec-ii no 22009" in IX International Conference Mining and Environmental Protection (MEP 23) (2023):21-29.