TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Todorović, Dejan
AU  - Čeganjac, Zoran
AU  - Aćimović, Zagorka
PY  - 2022
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1064
AB  - The paper investigates the composition and procedures for the production of refractory coatings based on cordierite for the protection of parts of equipment in metallurgy and mining. An ultrasonic vibration method with a stationary sample according to the ASTM G32 standard was used to determine the resistance properties of the obtained protective coatings. The aim of the study was to determine the quality of coatings and the possibility of application for the protection of metal surfaces in conditions of cavitation, wear and corrosion. The change in the mass of the samples as a function of cavitation time was monitored. Cavitation velocity was determined as an indicator of coating resistance under cavitation loads. The occurrence and development of coating surface damage were monitored using a scanning electron microscope. Based on the value of cavitation velocity and analysis of surface damage morphology, cavitation resistance of the coating was determined. The results showed a satisfactory degree of resistance to cavitation of the tested refractory coatings based on cordierite and the possibility of their application for the protection of parts of equipment that will be exposed to cavitation loads during exploitation.
PB  - Belgrade : Serbian Ceramic Society
C3  - Conference Advanced Ceramics and Application: X New Frontiers in Multifunctional Material Science and Processing
T1  - Synthesis and characterisation of cordierite - based protective coating
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Todorović, Dejan and Čeganjac, Zoran and Aćimović, Zagorka",
year = "2022",
abstract = "The paper investigates the composition and procedures for the production of refractory coatings based on cordierite for the protection of parts of equipment in metallurgy and mining. An ultrasonic vibration method with a stationary sample according to the ASTM G32 standard was used to determine the resistance properties of the obtained protective coatings. The aim of the study was to determine the quality of coatings and the possibility of application for the protection of metal surfaces in conditions of cavitation, wear and corrosion. The change in the mass of the samples as a function of cavitation time was monitored. Cavitation velocity was determined as an indicator of coating resistance under cavitation loads. The occurrence and development of coating surface damage were monitored using a scanning electron microscope. Based on the value of cavitation velocity and analysis of surface damage morphology, cavitation resistance of the coating was determined. The results showed a satisfactory degree of resistance to cavitation of the tested refractory coatings based on cordierite and the possibility of their application for the protection of parts of equipment that will be exposed to cavitation loads during exploitation.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Conference Advanced Ceramics and Application: X New Frontiers in Multifunctional Material Science and Processing",
title = "Synthesis and characterisation of cordierite - based protective coating"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D., Todorović, D., Čeganjac, Z.,& Aćimović, Z.. (2022). Synthesis and characterisation of cordierite - based protective coating. in Conference Advanced Ceramics and Application: X New Frontiers in Multifunctional Material Science and Processing
Belgrade : Serbian Ceramic Society..

Pavlović M, Dojčinović M, Andrić L, Radulović D, Todorović D, Čeganjac Z, Aćimović Z. Synthesis and characterisation of cordierite - based protective coating. in Conference Advanced Ceramics and Application: X New Frontiers in Multifunctional Material Science and Processing. 2022;..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Todorović, Dejan, Čeganjac, Zoran, Aćimović, Zagorka, "Synthesis and characterisation of cordierite - based protective coating" in Conference Advanced Ceramics and Application: X New Frontiers in Multifunctional Material Science and Processing (2022).

TY  - JOUR
AU  - Pavlović, Marko
AU  - Nikolić, Jasmina
AU  - Andrić, Ljubiša
AU  - Todorović, Dejan
AU  - Bozić, Katarina
AU  - Drmanić, Saša
PY  - 2022
UR  - https://ritnms.itnms.ac.rs/handle/123456789/628
AB  - This paper is focused on the preparation procedures, using a talc-based filler, to improve the rheologic properties of the lost foam refractory coatings. Talc, with grain size of 40 .m, was mechanically activated in a vibration mill over the following times: 10, 20 and 30 min. Depending on the time required for the mechanical activation, the change in the filler grain size and shape was analysed along their effects on the talc-filled lost foam coating dispersion ability and stability. In order to characterize the filler, the following methods were used: X-ray diffraction, scanning electron microscopy and optic microscopy. The coating composition was tuned by choosing the suitable grain size and shape factor of the activated filler. In addition, different coating components (additives, solvent) were applied to alter the coating generation procedure. It was shown that the application of this type of the lost foam refractory coatings - water-based coatings - have a positive influence on quality of the aluminium alloy castings, which contributes to reducing the cost of cleaning and processing of the castings. Also, alcohol-based refractory coatings with talc-based activated fillers were tested and used to have the castings produced in the sand moulds.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - Synthesis of the new lost foam refractory coatings based on talc
EP  - 503
IS  - 4
SP  - 491
VL  - 87
DO  - 10.2298/JSC211019111P
UR  - conv_935
ER  - 

@article{
author = "Pavlović, Marko and Nikolić, Jasmina and Andrić, Ljubiša and Todorović, Dejan and Bozić, Katarina and Drmanić, Saša",
year = "2022",
abstract = "This paper is focused on the preparation procedures, using a talc-based filler, to improve the rheologic properties of the lost foam refractory coatings. Talc, with grain size of 40 .m, was mechanically activated in a vibration mill over the following times: 10, 20 and 30 min. Depending on the time required for the mechanical activation, the change in the filler grain size and shape was analysed along their effects on the talc-filled lost foam coating dispersion ability and stability. In order to characterize the filler, the following methods were used: X-ray diffraction, scanning electron microscopy and optic microscopy. The coating composition was tuned by choosing the suitable grain size and shape factor of the activated filler. In addition, different coating components (additives, solvent) were applied to alter the coating generation procedure. It was shown that the application of this type of the lost foam refractory coatings - water-based coatings - have a positive influence on quality of the aluminium alloy castings, which contributes to reducing the cost of cleaning and processing of the castings. Also, alcohol-based refractory coatings with talc-based activated fillers were tested and used to have the castings produced in the sand moulds.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "Synthesis of the new lost foam refractory coatings based on talc",
pages = "503-491",
number = "4",
volume = "87",
doi = "10.2298/JSC211019111P",
url = "conv_935"
}

Pavlović, M., Nikolić, J., Andrić, L., Todorović, D., Bozić, K.,& Drmanić, S.. (2022). Synthesis of the new lost foam refractory coatings based on talc. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 87(4), 491-503.
https://doi.org/10.2298/JSC211019111P
conv_935

Pavlović M, Nikolić J, Andrić L, Todorović D, Bozić K, Drmanić S. Synthesis of the new lost foam refractory coatings based on talc. in Journal of the Serbian Chemical Society. 2022;87(4):491-503.
doi:10.2298/JSC211019111P
conv_935 .

Pavlović, Marko, Nikolić, Jasmina, Andrić, Ljubiša, Todorović, Dejan, Bozić, Katarina, Drmanić, Saša, "Synthesis of the new lost foam refractory coatings based on talc" in Journal of the Serbian Chemical Society, 87, no. 4 (2022):491-503,
https://doi.org/10.2298/JSC211019111P .,
conv_935 .

TY  - JOUR
AU  - Andrić, Ljubiša
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Radulović, Dragan
PY  - 2021
UR  - https://ritnms.itnms.ac.rs/handle/123456789/577
AB  - U radu je ispitivana otpornost pod dejstvom kavitacije uzoraka sinterovanog pirofilita. Polazni uzorak pirofilita iz ležišta Parsović-BiH mleven je u vibracionom mlinu na granulaciju 20mm, presovan je i sinterovan na temperaturama (ºC): 1000; 1100; 1200. Za procenu kavitacione otpornosti praćena je promena mase uzorka u funkciji vremena delovanja kavitacije. Primenjena je ultrazvučna vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Izračunate su kavitacione brzine za sve uzorke, kao osnovni pokazatelj otpornosti materijala pod dejstvom kavitacije. Promena morfologije površine uzorka sa vremenom ispitivanja praćena je primenom skenirajuće elektronske mikroskopije. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je kavitaciona otpornost ispitivanih uzoraka na bazi pirofilita. Dobijeni rezultati ukazuju da uzorci sinterovanog pirofilita imaju zadovoljavajuću otpornost na dejstvo kavitacije i mogu se primeniti u uslovima manjih kavitacionih opterećenja.
AB  - The resistance under the action of cavitation of sintered pyrophillite samples was investigated. The initial sample of pyrophillite from the Parsovic-BiH deposit was ground a vibrating mill to a granulation of 20 mm, pressed and sintered at temperatures (⁰C): 100; 1100; 1200. To assess cavitation resistance, the change in sample mass as a function of cavitation time was monitored. The cavitation erosion test was performed using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. Cavitation velocites were calculated for all samples, as a basic indicator of the resistance of the material under the action of cavitation. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. Based on the values of cavitation velocity and analysis of the surface damage morphology, the cavitation resistance of the tested samples based on pyrophillite was determined. The obtained results indicate that the samples of sintered pyrophillite have satisfactory resistance to the action of cavitation and be applied in conditions of lower cavitation loads.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita
T1  - Determination of resistance to cavitation of pyrophyllite samples
EP  - 134
IS  - 2
SP  - 126
VL  - 62
DO  - 10.5937/zasmat2102126A
UR  - conv_162
ER  - 

@article{
author = "Andrić, Ljubiša and Pavlović, Marko and Dojčinović, Marina and Radulović, Dragan",
year = "2021",
abstract = "U radu je ispitivana otpornost pod dejstvom kavitacije uzoraka sinterovanog pirofilita. Polazni uzorak pirofilita iz ležišta Parsović-BiH mleven je u vibracionom mlinu na granulaciju 20mm, presovan je i sinterovan na temperaturama (ºC): 1000; 1100; 1200. Za procenu kavitacione otpornosti praćena je promena mase uzorka u funkciji vremena delovanja kavitacije. Primenjena je ultrazvučna vibraciona metoda sa stacionarnim uzorkom prema standardu ASTM G32. Izračunate su kavitacione brzine za sve uzorke, kao osnovni pokazatelj otpornosti materijala pod dejstvom kavitacije. Promena morfologije površine uzorka sa vremenom ispitivanja praćena je primenom skenirajuće elektronske mikroskopije. Na osnovu vrednosti kavitacione brzine i analize morfologije oštećenja površine određena je kavitaciona otpornost ispitivanih uzoraka na bazi pirofilita. Dobijeni rezultati ukazuju da uzorci sinterovanog pirofilita imaju zadovoljavajuću otpornost na dejstvo kavitacije i mogu se primeniti u uslovima manjih kavitacionih opterećenja., The resistance under the action of cavitation of sintered pyrophillite samples was investigated. The initial sample of pyrophillite from the Parsovic-BiH deposit was ground a vibrating mill to a granulation of 20 mm, pressed and sintered at temperatures (⁰C): 100; 1100; 1200. To assess cavitation resistance, the change in sample mass as a function of cavitation time was monitored. The cavitation erosion test was performed using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. Cavitation velocites were calculated for all samples, as a basic indicator of the resistance of the material under the action of cavitation. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. Based on the values of cavitation velocity and analysis of the surface damage morphology, the cavitation resistance of the tested samples based on pyrophillite was determined. The obtained results indicate that the samples of sintered pyrophillite have satisfactory resistance to the action of cavitation and be applied in conditions of lower cavitation loads.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita, Determination of resistance to cavitation of pyrophyllite samples",
pages = "134-126",
number = "2",
volume = "62",
doi = "10.5937/zasmat2102126A",
url = "conv_162"
}

Andrić, L., Pavlović, M., Dojčinović, M.,& Radulović, D.. (2021). Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 62(2), 126-134.
https://doi.org/10.5937/zasmat2102126A
conv_162

Andrić L, Pavlović M, Dojčinović M, Radulović D. Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita. in Zaštita materijala. 2021;62(2):126-134.
doi:10.5937/zasmat2102126A
conv_162 .

Andrić, Ljubiša, Pavlović, Marko, Dojčinović, Marina, Radulović, Dragan, "Određivanje otpornosti na dejstvo kavitacije uzoraka pirofilita" in Zaštita materijala, 62, no. 2 (2021):126-134,
https://doi.org/10.5937/zasmat2102126A .,
conv_162 .

TY  - CONF
AU  - Dojčinović, Marina
AU  - Grigorov, Irena
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1155
AB  - Mikrolegirani čelici se primenjuju za izradu različitih elemenata opreme u metalurgiji i rudarstvu. Zbog zahteva koje oprema treba da ispuni i sigurnosti koju treba da obezbedi, vrše se različita ispitivanja ove vrste konstrukcionih materijala. U radu je ispitivano ponašanje mikrolegiranog čelika S355M u uslovima dejstva kavitacije. Za ispitivanje je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćena je promena mase uzoraka u funkciji vremena dejstva kavitacije. Morfologija oštećenja površine analizirana je primenom skenirajuće elektronske mikroskopije. Utvrđen je mehanizam nastajanja i razvoja oštećenja površine uzoraka pod dejstvom kavitacije. Procenjena je mogućnost primene ove vrste materijala u rigoroznim uslovima eksploatacije koji su prisutni u metalurškim procesima.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020
T1  - Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije
EP  - 249
SP  - 244
ER  - 

@conference{
author = "Dojčinović, Marina and Grigorov, Irena and Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2020",
abstract = "Mikrolegirani čelici se primenjuju za izradu različitih elemenata opreme u metalurgiji i rudarstvu. Zbog zahteva koje oprema treba da ispuni i sigurnosti koju treba da obezbedi, vrše se različita ispitivanja ove vrste konstrukcionih materijala. U radu je ispitivano ponašanje mikrolegiranog čelika S355M u uslovima dejstva kavitacije. Za ispitivanje je primenjena ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Praćena je promena mase uzoraka u funkciji vremena dejstva kavitacije. Morfologija oštećenja površine analizirana je primenom skenirajuće elektronske mikroskopije. Utvrđen je mehanizam nastajanja i razvoja oštećenja površine uzoraka pod dejstvom kavitacije. Procenjena je mogućnost primene ove vrste materijala u rigoroznim uslovima eksploatacije koji su prisutni u metalurškim procesima.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020",
title = "Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije",
pages = "249-244"
}

Dojčinović, M., Grigorov, I., Pavlović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2020). Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 244-249.

Dojčinović M, Grigorov I, Pavlović M, Andrić L, Radulović D, Petrov M. Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020. 2020;:244-249..

Dojčinović, Marina, Grigorov, Irena, Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Ponašanje mikrolegiranog čelika u uslovima dejstva kavitacije" in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020 (2020):244-249.

TY  - CONF
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Dojčinović, Marina
AU  - Grigorov, Irena
AU  - Tanasković, Zorica
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1148
AB  - U radu je ispitivana mogućnost primene bazalta iz ležišta Vrelo - Kopaonik, za dobijanje proizvoda staklo-keramike poboljšanih svojstava za primenu u proizvodnji konstrukcionih elemenata opreme u metalurgiji i rudarstvu. Jedan od ciljeva bio je i proširenje primene ispitivanih keramičkih materijala u inženjerskoj praksi kao zamena za metalne materijale. Istraženi su postupci prečišćavanja, mlevenja I mehaničke aktivacije bazaltnog agregata, postupci sinteze uzoraka procesima presovanja I sinterovanja, kao i procesi topljenja, livenja i termičkog tretmana. S obzirom na rigorozne uslove eksploatacije u metalurškim i rudarskim procesima u cilju ispitivanja kvaliteta i izbora materijala primenjeno je više metoda karakterizacije -rendgenska difrakciona analiza, optička i skenirajuća elektronska mikroskopija, ultrazvučna vibraciona metoda sa stacionarnim uzorkom, kompjuterska analiza slike. Dobra tehnička svojstva čini bazalt važnom sirovinom za primenu u različitim granama industrije. U radu su prikazani i rezultati istraživanja primene bazalta za izradu vatrostalnih premaza za zaštitu metalnih i nemetalnih konstrukcija, kao i ispitivanje primene ojačivača na bazi bazalta u kompozitima tipa polimerna osnova/bazaltni prah za specifične uslove primenu u mašinstvu I građevinarstvu. Srbija raspolaže kvalitetnim bazaltom (stenama bazalta) za istraživanja sinteze novih materijala i široku primenu u industriji. Primena ove vrste sirovina može da doprinese poboljšanju ekonomskih, energetskih i ekoloških aspekata poslovanja metalurških i rudarskih pogona, kao i pogona za reciklažu otpada.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020
T1  - Mogućnost razvoja tehnologije prerade bazalta
EP  - 84
SP  - 78
ER  - 

@conference{
author = "Pavlović, Marko and Andrić, Ljubiša and Dojčinović, Marina and Grigorov, Irena and Tanasković, Zorica and Radulović, Dragan and Petrov, Milan",
year = "2020",
abstract = "U radu je ispitivana mogućnost primene bazalta iz ležišta Vrelo - Kopaonik, za dobijanje proizvoda staklo-keramike poboljšanih svojstava za primenu u proizvodnji konstrukcionih elemenata opreme u metalurgiji i rudarstvu. Jedan od ciljeva bio je i proširenje primene ispitivanih keramičkih materijala u inženjerskoj praksi kao zamena za metalne materijale. Istraženi su postupci prečišćavanja, mlevenja I mehaničke aktivacije bazaltnog agregata, postupci sinteze uzoraka procesima presovanja I sinterovanja, kao i procesi topljenja, livenja i termičkog tretmana. S obzirom na rigorozne uslove eksploatacije u metalurškim i rudarskim procesima u cilju ispitivanja kvaliteta i izbora materijala primenjeno je više metoda karakterizacije -rendgenska difrakciona analiza, optička i skenirajuća elektronska mikroskopija, ultrazvučna vibraciona metoda sa stacionarnim uzorkom, kompjuterska analiza slike. Dobra tehnička svojstva čini bazalt važnom sirovinom za primenu u različitim granama industrije. U radu su prikazani i rezultati istraživanja primene bazalta za izradu vatrostalnih premaza za zaštitu metalnih i nemetalnih konstrukcija, kao i ispitivanje primene ojačivača na bazi bazalta u kompozitima tipa polimerna osnova/bazaltni prah za specifične uslove primenu u mašinstvu I građevinarstvu. Srbija raspolaže kvalitetnim bazaltom (stenama bazalta) za istraživanja sinteze novih materijala i široku primenu u industriji. Primena ove vrste sirovina može da doprinese poboljšanju ekonomskih, energetskih i ekoloških aspekata poslovanja metalurških i rudarskih pogona, kao i pogona za reciklažu otpada.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020",
title = "Mogućnost razvoja tehnologije prerade bazalta",
pages = "84-78"
}

Pavlović, M., Andrić, L., Dojčinović, M., Grigorov, I., Tanasković, Z., Radulović, D.,& Petrov, M.. (2020). Mogućnost razvoja tehnologije prerade bazalta. in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 78-84.

Pavlović M, Andrić L, Dojčinović M, Grigorov I, Tanasković Z, Radulović D, Petrov M. Mogućnost razvoja tehnologije prerade bazalta. in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020. 2020;:78-84..

Pavlović, Marko, Andrić, Ljubiša, Dojčinović, Marina, Grigorov, Irena, Tanasković, Zorica, Radulović, Dragan, Petrov, Milan, "Mogućnost razvoja tehnologije prerade bazalta" in XI Simpozijum sa međunarodnim učešćem, Rudarstvo 2020 (2020):78-84.

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Petrov, Milan
AU  - Tanasković, Zorica
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1157
AB  - U radu je istraživano dobijanje vatrostalnih punioca na bazi različitih mineralnih sirovina, a pre svega pirofilita, mulita, kordijerita i cirkona. U cilju dobijanja vatrostalnih punioca visokih svojstava I primene u sintezi novih oblikovanih i neoblikovanih vatrostalnih materijala, vršena su sistematična istraživanja procesa pripreme mineralnih sirovina postupcima prečišćavanja, mlevenja i mehaničke aktivacije. Mlevenje i mehanička aktivacija punioca vršena je u visokoenergetskim mlinovima sa polazne veličine zrna 100μm do veličine zrna 15 μm. Posebna pažnja tokom istraživanja posvećena je ispitivanju uticaja mehaničke akrivacije punioca na reološka svojstva dobijenih vatrostalnih premaza za primenu u livarstvu. Karakterizacija dobijenih punioca vršena je primenom rendgenske difrakcione analize i skenirajuće elektronske mikroskopije, a kvalitativna mineraloška analiza i analiza oblika I veličine zrna punioca urađena je pod polarizacionim mikroskopom primenom imerzione metode I kompjuterskog programskog paketa Ozaria 2.5. Rezultati ispitivanja mogućnosti primene dobijenih vatrostalnih punioca za izradu livačkih premaza pokazali su da je veličina zrna punioca 15-20μm optimalana za postizanje zadovoljavajuće reologije primene premaza. Zadovoljavajuća svojstva premaza postignuta su primenom optimalnih sastava premaza i procesa njihove izrade.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''
T1  - Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona
EP  - 243
SP  - 238
ER  - 

@conference{
author = "Andrić, Ljubiša and Radulović, Dragan and Pavlović, Marko and Dojčinović, Marina and Petrov, Milan and Tanasković, Zorica",
year = "2020",
abstract = "U radu je istraživano dobijanje vatrostalnih punioca na bazi različitih mineralnih sirovina, a pre svega pirofilita, mulita, kordijerita i cirkona. U cilju dobijanja vatrostalnih punioca visokih svojstava I primene u sintezi novih oblikovanih i neoblikovanih vatrostalnih materijala, vršena su sistematična istraživanja procesa pripreme mineralnih sirovina postupcima prečišćavanja, mlevenja i mehaničke aktivacije. Mlevenje i mehanička aktivacija punioca vršena je u visokoenergetskim mlinovima sa polazne veličine zrna 100μm do veličine zrna 15 μm. Posebna pažnja tokom istraživanja posvećena je ispitivanju uticaja mehaničke akrivacije punioca na reološka svojstva dobijenih vatrostalnih premaza za primenu u livarstvu. Karakterizacija dobijenih punioca vršena je primenom rendgenske difrakcione analize i skenirajuće elektronske mikroskopije, a kvalitativna mineraloška analiza i analiza oblika I veličine zrna punioca urađena je pod polarizacionim mikroskopom primenom imerzione metode I kompjuterskog programskog paketa Ozaria 2.5. Rezultati ispitivanja mogućnosti primene dobijenih vatrostalnih punioca za izradu livačkih premaza pokazali su da je veličina zrna punioca 15-20μm optimalana za postizanje zadovoljavajuće reologije primene premaza. Zadovoljavajuća svojstva premaza postignuta su primenom optimalnih sastava premaza i procesa njihove izrade.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''",
title = "Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona",
pages = "243-238"
}

Andrić, L., Radulović, D., Pavlović, M., Dojčinović, M., Petrov, M.,& Tanasković, Z.. (2020). Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 238-243.

Andrić L, Radulović D, Pavlović M, Dojčinović M, Petrov M, Tanasković Z. Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona. in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020''. 2020;:238-243..

Andrić, Ljubiša, Radulović, Dragan, Pavlović, Marko, Dojčinović, Marina, Petrov, Milan, Tanasković, Zorica, "Efekti primene mikronizirajućeg mlevenja na kvalitet vatrostalnih punioca na bazi pirofilita, mulita, kordijerita i cirkona" in XI Simpozijum sa međunarodnim učešćem, “Rudarstvo 2020'' (2020):238-243.

TY  - JOUR
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Pavlović, Marko
AU  - Petrov, Milan
AU  - Stojanović, Jovica
PY  - 2020
UR  - https://ritnms.itnms.ac.rs/handle/123456789/552
AB  - U radu su istraživani postupci pripreme punioca na bazi pirofilita za dobijanje vatrostalnih premaza sa kontrolisanim reološkim svojstvima. Polazni uzorci pirofilita dobijeni su iz ležišta Parsović-BiH. Istraživan je uticaj procesa mikronizirajućeg mlevenja na promenu svojstava vatrostalnog punioca, promenu veličine i oblika zrna punioca, disperznost i stabilnost suspenzije premaza. Za karakterizaciju dobijenih punioca korišćene su metode XRD, SEM i optička mikroskopija. U drugoj fazi istraživanja punioci su podvrgnuti procesu mikronizirajućeg mlevenja u mlinu sa keramičkim kuglama. Gornja granica krupnoće ulaznog materijala bila je 100% -2,00 mm. Vremena mikronizirajućeg mlevenja (min): 15; 20;25. Cilj je bio optimizacija svojstava punioca na bazi pirofilita, definisanje sastava premaza i postupaka njihove izrade. Kvalitet dobijenih premaza kontrolisan je u skladu sa standardom za ovu vrstu vatrostalnih proizvoda.
AB  - The paper investigates the procedures for the preparation of fillers based on pyrophyllite for obtaining refractory coatings with controlled rheological properties. Starting samples of pyrophyllite were obtained from the Parsović-B&H deposit. The influence of the micronizing ginding process on the change in the properties of the refractory filler, the change in the size and shape of filler grain, the dispersion and stability of the coating suspension was investigation. To characterize the obtained fillers XRD, SEM and optical microscopy were used. In the second phase of the research, the fillers were subjected to the process of micronizing grinding in the mill with ceramic balls. The upper limit of the size of the input material was 100% -2,00 mm. Micronizing grinding time (min): 15; 20; 25. The aim was to optimize the properties of fillers based on pyrophyllite, to define the composition of coatings and the procedures for their production. The quality of the obtained coatings was controlled in accordance with the standard for this type of refractory products.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Mogućnost primene pirofilita kao punioca u vatrostalnim premazima
T1  - Possibility of applying pyrophylite as filler in refractory coatings
EP  - 219
IS  - 3
SP  - 210
VL  - 61
DO  - 10.5937/zasmat2003210A
UR  - conv_161
ER  - 

@article{
author = "Andrić, Ljubiša and Radulović, Dragan and Pavlović, Marko and Petrov, Milan and Stojanović, Jovica",
year = "2020",
abstract = "U radu su istraživani postupci pripreme punioca na bazi pirofilita za dobijanje vatrostalnih premaza sa kontrolisanim reološkim svojstvima. Polazni uzorci pirofilita dobijeni su iz ležišta Parsović-BiH. Istraživan je uticaj procesa mikronizirajućeg mlevenja na promenu svojstava vatrostalnog punioca, promenu veličine i oblika zrna punioca, disperznost i stabilnost suspenzije premaza. Za karakterizaciju dobijenih punioca korišćene su metode XRD, SEM i optička mikroskopija. U drugoj fazi istraživanja punioci su podvrgnuti procesu mikronizirajućeg mlevenja u mlinu sa keramičkim kuglama. Gornja granica krupnoće ulaznog materijala bila je 100% -2,00 mm. Vremena mikronizirajućeg mlevenja (min): 15; 20;25. Cilj je bio optimizacija svojstava punioca na bazi pirofilita, definisanje sastava premaza i postupaka njihove izrade. Kvalitet dobijenih premaza kontrolisan je u skladu sa standardom za ovu vrstu vatrostalnih proizvoda., The paper investigates the procedures for the preparation of fillers based on pyrophyllite for obtaining refractory coatings with controlled rheological properties. Starting samples of pyrophyllite were obtained from the Parsović-B&H deposit. The influence of the micronizing ginding process on the change in the properties of the refractory filler, the change in the size and shape of filler grain, the dispersion and stability of the coating suspension was investigation. To characterize the obtained fillers XRD, SEM and optical microscopy were used. In the second phase of the research, the fillers were subjected to the process of micronizing grinding in the mill with ceramic balls. The upper limit of the size of the input material was 100% -2,00 mm. Micronizing grinding time (min): 15; 20; 25. The aim was to optimize the properties of fillers based on pyrophyllite, to define the composition of coatings and the procedures for their production. The quality of the obtained coatings was controlled in accordance with the standard for this type of refractory products.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Mogućnost primene pirofilita kao punioca u vatrostalnim premazima, Possibility of applying pyrophylite as filler in refractory coatings",
pages = "219-210",
number = "3",
volume = "61",
doi = "10.5937/zasmat2003210A",
url = "conv_161"
}

Andrić, L., Radulović, D., Pavlović, M., Petrov, M.,& Stojanović, J.. (2020). Mogućnost primene pirofilita kao punioca u vatrostalnim premazima. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 61(3), 210-219.
https://doi.org/10.5937/zasmat2003210A
conv_161

Andrić L, Radulović D, Pavlović M, Petrov M, Stojanović J. Mogućnost primene pirofilita kao punioca u vatrostalnim premazima. in Zaštita materijala. 2020;61(3):210-219.
doi:10.5937/zasmat2003210A
conv_161 .

Andrić, Ljubiša, Radulović, Dragan, Pavlović, Marko, Petrov, Milan, Stojanović, Jovica, "Mogućnost primene pirofilita kao punioca u vatrostalnim premazima" in Zaštita materijala, 61, no. 3 (2020):210-219,
https://doi.org/10.5937/zasmat2003210A .,
conv_161 .

TY  - CONF
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Harbinja, Muhamed
AU  - Petrov, Milan
AU  - Marković, Marija
AU  - Stojanović, Jovica
AU  - Pavlović, Marko
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1158
AB  - Mikronizacija pirofilita je veliki tehnološko-tehnički problem, iz razloga što klasične mašine za usitnjavanje, ne mogu, svojim procesnim uslovima, da ga mikroniziraju do finog i posebno veoma finog granulometrijskog sastava, koji je neophodan za nove savremene domene industrijke primene. Iz ovih razloga, neophodno je dobro poznavanje njihovih fizičko-hemijskih, mineraloških, mehaničkih osobina, i posebno mehanizama procesa njihovog finog usitnjavanja (mikronizacije).Detaljnim istraživanjima kinetike mikronizirajućeg mlevenja pirofilita, dobijeni su elementi za određivanje efikasnosti rada vibracionih i ultra-centrifugalnih mlinova, a samim tim stečeni su uslovi za definisanje kako tehnoloških parametara mikronizacije, tako i parametara proizvoda mikronizacije. U isto vreme, na osnovu detaljne fizičko-hemijske, mineraloške i rentgenske karakterizacije mikroniziranih proizvoda pirofilita, uočene su određene fizičko-hemijske promene u njihovoj strukturi (prelaz pirofilita u amorfno stanje), što je sigurno posledica rada pomenutih mlinova.
PB  - Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina
C3  - X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”
T1  - Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)
EP  - 113
SP  - 103
ER  - 

@conference{
author = "Andrić, Ljubiša and Radulović, Dragan and Harbinja, Muhamed and Petrov, Milan and Marković, Marija and Stojanović, Jovica and Pavlović, Marko",
year = "2019",
abstract = "Mikronizacija pirofilita je veliki tehnološko-tehnički problem, iz razloga što klasične mašine za usitnjavanje, ne mogu, svojim procesnim uslovima, da ga mikroniziraju do finog i posebno veoma finog granulometrijskog sastava, koji je neophodan za nove savremene domene industrijke primene. Iz ovih razloga, neophodno je dobro poznavanje njihovih fizičko-hemijskih, mineraloških, mehaničkih osobina, i posebno mehanizama procesa njihovog finog usitnjavanja (mikronizacije).Detaljnim istraživanjima kinetike mikronizirajućeg mlevenja pirofilita, dobijeni su elementi za određivanje efikasnosti rada vibracionih i ultra-centrifugalnih mlinova, a samim tim stečeni su uslovi za definisanje kako tehnoloških parametara mikronizacije, tako i parametara proizvoda mikronizacije. U isto vreme, na osnovu detaljne fizičko-hemijske, mineraloške i rentgenske karakterizacije mikroniziranih proizvoda pirofilita, uočene su određene fizičko-hemijske promene u njihovoj strukturi (prelaz pirofilita u amorfno stanje), što je sigurno posledica rada pomenutih mlinova.",
publisher = "Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina",
journal = "X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”",
title = "Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)",
pages = "113-103"
}

Andrić, L., Radulović, D., Harbinja, M., Petrov, M., Marković, M., Stojanović, J.,& Pavlović, M.. (2019). Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH). in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”
Beograd : Institut za tehnologiju nuklearnih i drugih mineralnih sirovina., 103-113.

Andrić L, Radulović D, Harbinja M, Petrov M, Marković M, Stojanović J, Pavlović M. Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH). in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019”. 2019;:103-113..

Andrić, Ljubiša, Radulović, Dragan, Harbinja, Muhamed, Petrov, Milan, Marković, Marija, Stojanović, Jovica, Pavlović, Marko, "Mikronizirajuće mlevenje pirofilita-Parsović-Konjic (BiH)" in X Simpozijum sa međunarodnim učešćem-“Rudarstvo 2019” (2019):103-113.

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1061
AB  - The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
T1  - Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy
EP  - 429
SP  - 423
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2019",
abstract = "The paper presents the results of the investigation of cavitation resistance of glass-ceramics based on basalt rocks from the Vrelo Kopaonik deposit and various waste industrial raw materials. The aim was to determine the possibility of using glass-ceramics as a substitute for metallic materials in the production of structural elements of mining and metallurgy equipment. The ultrasonic vibration method (with a stationary samples) was used for cavitation resistance testing, according to the ASTM G-32 standard. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling (XIII IMPRC) Conference",
title = "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy",
pages = "429-423"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2019). Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
Bor : University of Belgrade, Technical Faculty in Bor., 423-429.

Pavlović M, Dojčinović M, Andrić L, Radulović D, Petrov M. Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference. 2019;:423-429..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Determination of the cavitation resistance of glass-ceramic samples based on raw basalt and industrial waste raw materials for use in metallurgy" in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference (2019):423-429.

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Čeganjac, Zoran
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1063
AB  - Cavitation is a kind of wear and represents formation, growth and collaps of steam or vapor gas bubbles in a flowing fluid. Collaps of the bubble creates shock waves and micro–jet that are damaging materials in contact with the fluid that flows. It has been shown that the impact formed by collapsing cavitation bubbles cause damage and mass loss of the material, i.e., cavitation erosion. Basalt–based glass ceramics obtained by processes of melting, casting and thermal treatment of the basalt aggregate proved to be suitable for use in conditions of high cavitation loads. The experiment was conducted using an ultrasonic vibration method with stationary sample (ASTM G32 standard). A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the sample surface was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy. Analyzing the progression of erosion samples of glass-ceramics, it can be concluded that the mass loss is small, for 120 min exposure is 3.53 mg, with a cavitation rate of 0.03 mg/min and total surface damage of the sample of 12%. This technical ceramics shows high resistance to the effect of the cavitation.
PB  - Belgrade : Institute of Technical Sciences of SASA
PB  - Belgrade : Serbian ceramic society
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application VIII – New frontiers in multifunctional material science and processing”
T1  - Cavitation demage morphology of glass-ceramics based on basalt
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Čeganjac, Zoran",
year = "2019",
abstract = "Cavitation is a kind of wear and represents formation, growth and collaps of steam or vapor gas bubbles in a flowing fluid. Collaps of the bubble creates shock waves and micro–jet that are damaging materials in contact with the fluid that flows. It has been shown that the impact formed by collapsing cavitation bubbles cause damage and mass loss of the material, i.e., cavitation erosion. Basalt–based glass ceramics obtained by processes of melting, casting and thermal treatment of the basalt aggregate proved to be suitable for use in conditions of high cavitation loads. The experiment was conducted using an ultrasonic vibration method with stationary sample (ASTM G32 standard). A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the sample surface was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy. Analyzing the progression of erosion samples of glass-ceramics, it can be concluded that the mass loss is small, for 120 min exposure is 3.53 mg, with a cavitation rate of 0.03 mg/min and total surface damage of the sample of 12%. This technical ceramics shows high resistance to the effect of the cavitation.",
publisher = "Belgrade : Institute of Technical Sciences of SASA, Belgrade : Serbian ceramic society",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application VIII – New frontiers in multifunctional material science and processing”",
title = "Cavitation demage morphology of glass-ceramics based on basalt"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Čeganjac, Z.. (2019). Cavitation demage morphology of glass-ceramics based on basalt. in Serbian Ceramic Society Conference “Advanced Ceramic and Application VIII – New frontiers in multifunctional material science and processing”
Belgrade : Institute of Technical Sciences of SASA..

Pavlović M, Dojčinović M, Andrić L, Radulović D, Čeganjac Z. Cavitation demage morphology of glass-ceramics based on basalt. in Serbian Ceramic Society Conference “Advanced Ceramic and Application VIII – New frontiers in multifunctional material science and processing”. 2019;..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Čeganjac, Zoran, "Cavitation demage morphology of glass-ceramics based on basalt" in Serbian Ceramic Society Conference “Advanced Ceramic and Application VIII – New frontiers in multifunctional material science and processing” (2019).

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Čeganjac, Zoran
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1062
AB  - The paper examines the cavitation resistance of the sintered basalt samples. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. Analyzing the progression of erosion samples of sintered basalt, it can be concluded that the mass loss is small, for 120 min exposure is 2,26 mg, with a cavitation rate of 0.02 mg/min and total surface damage of the sample surface of 15%. It has been shown that sintered basalt samples can be applied in conditions in which high cavitation loads are expected.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 51th International October Conference on Mining and Metallurgy
T1  - Determination of cavitation resistance of sintered basalt samples
EP  - 218
SP  - 215
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Radulović, Dragan and Čeganjac, Zoran",
year = "2019",
abstract = "The paper examines the cavitation resistance of the sintered basalt samples. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. Analyzing the progression of erosion samples of sintered basalt, it can be concluded that the mass loss is small, for 120 min exposure is 2,26 mg, with a cavitation rate of 0.02 mg/min and total surface damage of the sample surface of 15%. It has been shown that sintered basalt samples can be applied in conditions in which high cavitation loads are expected.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "51th International October Conference on Mining and Metallurgy",
title = "Determination of cavitation resistance of sintered basalt samples",
pages = "218-215"
}

Pavlović, M., Dojčinović, M., Andrić, L., Radulović, D.,& Čeganjac, Z.. (2019). Determination of cavitation resistance of sintered basalt samples. in 51th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 215-218.

Pavlović M, Dojčinović M, Andrić L, Radulović D, Čeganjac Z. Determination of cavitation resistance of sintered basalt samples. in 51th International October Conference on Mining and Metallurgy. 2019;:215-218..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Radulović, Dragan, Čeganjac, Zoran, "Determination of cavitation resistance of sintered basalt samples" in 51th International October Conference on Mining and Metallurgy (2019):215-218.

TY  - CONF
AU  - Radulović, Dragan
AU  - Andrić, Ljubiša
AU  - Petrov, Milan
AU  - Božović, Darko
AU  - Pavlović, Marko
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1043
AB  - Paper presents results of investigations of the possibility of using “Brijeg”-Ulcinj limestone as filler in various industries. Micronization, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses were performed. Physico-chemical properties of this sample classify it among high quality carbonate raw materials with high CaCO3 content of 98.21%, with low contents of MgCO3 0.88 % and SiO2 0.16 %. Its quality satisfies requirements of standards on using of calcium carbonate as filler in next industries: paints and coatings; rubber and PVC; glass; foundry ; sugar industry production of mineral fertilizers and metallurgy.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
T1  - Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries
EP  - 126
SP  - 119
ER  - 

@conference{
author = "Radulović, Dragan and Andrić, Ljubiša and Petrov, Milan and Božović, Darko and Pavlović, Marko",
year = "2019",
abstract = "Paper presents results of investigations of the possibility of using “Brijeg”-Ulcinj limestone as filler in various industries. Micronization, granulometric composition, oil and water absorption and degree of whiteness were investigated, and chemical and thermal analyses were performed. Physico-chemical properties of this sample classify it among high quality carbonate raw materials with high CaCO3 content of 98.21%, with low contents of MgCO3 0.88 % and SiO2 0.16 %. Its quality satisfies requirements of standards on using of calcium carbonate as filler in next industries: paints and coatings; rubber and PVC; glass; foundry ; sugar industry production of mineral fertilizers and metallurgy.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XIII International Mineral Processing and Recycling (XIII IMPRC) Conference",
title = "Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries",
pages = "126-119"
}

Radulović, D., Andrić, L., Petrov, M., Božović, D.,& Pavlović, M.. (2019). Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference
Bor : University of Belgrade, Technical Faculty in Bor., 119-126.

Radulović D, Andrić L, Petrov M, Božović D, Pavlović M. Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries. in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference. 2019;:119-126..

Radulović, Dragan, Andrić, Ljubiša, Petrov, Milan, Božović, Darko, Pavlović, Marko, "Obtaining Fillers Based on Limestone from Deposit Brijeg-Ulcinj for Applications in Various Industries" in XIII International Mineral Processing and Recycling (XIII IMPRC) Conference (2019):119-126.

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, M.
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/525
AB  - U radu je ispitivana otpornost na dejstvo kavitacije staklo-keramike na bazi bazalta. Ispitivane su dve vrste uzoraka: liveni i sinterovani uzorci na bazi bazalta. Kavitaciono erozioni test izveden je pomoću ultrazvučne vibracione metode sa stacionarnim uzorkom. Da bi se odredila kavitaciona otpornost praćena je promena mase uzoraka u funkciji vremena ispitivanja. Promena morfologije oštećenja površine uzoraka tokom ispitivanja praćena je skenirajućom elektronskom mikroskopijom. Nivo degradacije površine kvantifikovan je korišćenjem analize slike. Uzorci su ispitivani pod istim uslovima. Poređenje svojstava otpornosti na dejstvo kavitacije izvršeno je u odnosu na vrednosti kavitacionih brzina. Rezultati su pokazali visok stepen otpornosti ispitivanih uzoraka i mogućnost njihove primene u uslovima visokih kavitacionih opterećenja.
AB  - The paper examines the resistance to the effect of cavitation of glass-ceramics based on basalt. Two types of samples were investigated: cast and sintered samples based on basalt.The cavitation erosion test was performed using the ultrasonic vibratory method with a stationary sample. To measure the cavitation resistance, a change in sample mass in function of the cavitation time was monitored. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. The level of the surface degradation of the samples was quantified using the image analysis. Samples were tested under the same conditions. A comparison of the properties of the resistance to the effect of cavitation was performed in relation to the calculated cavitation rates. The results showed the high degree of cavitation resistance of the tested samples and the possibility of their application in conditions of high cavitation loads.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Journal of Mining and Metallurgy A: Mining
T1  - Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta
T1  - Comparison of the formation and development of cavitation damage on cast and sintered samples based on basalt
EP  - 44
IS  - 1
SP  - 37
VL  - 55
DO  - 10.5937/JMMA1901037P
UR  - conv_339
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, M. and Andrić, Ljubiša and Radulović, Dragan",
year = "2019",
abstract = "U radu je ispitivana otpornost na dejstvo kavitacije staklo-keramike na bazi bazalta. Ispitivane su dve vrste uzoraka: liveni i sinterovani uzorci na bazi bazalta. Kavitaciono erozioni test izveden je pomoću ultrazvučne vibracione metode sa stacionarnim uzorkom. Da bi se odredila kavitaciona otpornost praćena je promena mase uzoraka u funkciji vremena ispitivanja. Promena morfologije oštećenja površine uzoraka tokom ispitivanja praćena je skenirajućom elektronskom mikroskopijom. Nivo degradacije površine kvantifikovan je korišćenjem analize slike. Uzorci su ispitivani pod istim uslovima. Poređenje svojstava otpornosti na dejstvo kavitacije izvršeno je u odnosu na vrednosti kavitacionih brzina. Rezultati su pokazali visok stepen otpornosti ispitivanih uzoraka i mogućnost njihove primene u uslovima visokih kavitacionih opterećenja., The paper examines the resistance to the effect of cavitation of glass-ceramics based on basalt. Two types of samples were investigated: cast and sintered samples based on basalt.The cavitation erosion test was performed using the ultrasonic vibratory method with a stationary sample. To measure the cavitation resistance, a change in sample mass in function of the cavitation time was monitored. The change in the morphology of the surface with the test time was followed by scanning electron microscopy. The level of the surface degradation of the samples was quantified using the image analysis. Samples were tested under the same conditions. A comparison of the properties of the resistance to the effect of cavitation was performed in relation to the calculated cavitation rates. The results showed the high degree of cavitation resistance of the tested samples and the possibility of their application in conditions of high cavitation loads.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Journal of Mining and Metallurgy A: Mining",
title = "Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta, Comparison of the formation and development of cavitation damage on cast and sintered samples based on basalt",
pages = "44-37",
number = "1",
volume = "55",
doi = "10.5937/JMMA1901037P",
url = "conv_339"
}

Pavlović, M., Dojčinović, M., Andrić, L.,& Radulović, D.. (2019). Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta. in Journal of Mining and Metallurgy A: Mining
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 55(1), 37-44.
https://doi.org/10.5937/JMMA1901037P
conv_339

Pavlović M, Dojčinović M, Andrić L, Radulović D. Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta. in Journal of Mining and Metallurgy A: Mining. 2019;55(1):37-44.
doi:10.5937/JMMA1901037P
conv_339 .

Pavlović, Marko, Dojčinović, M., Andrić, Ljubiša, Radulović, Dragan, "Poređenje nastajanja i razvoja kavitacionih oštećenja livenih i sinterovanih uzoraka na bazi bazalta" in Journal of Mining and Metallurgy A: Mining, 55, no. 1 (2019):37-44,
https://doi.org/10.5937/JMMA1901037P .,
conv_339 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Drmanić, Saša
AU  - Đorđević, Nataša
AU  - Petrov, Milan
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/488
AB  - For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings
EP  - 25
IS  - 1
SP  - 15
VL  - 51
DO  - 10.2298/SOS1901015P
UR  - conv_864
ER  - 

@article{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Drmanić, Saša and Đorđević, Nataša and Petrov, Milan",
year = "2019",
abstract = "For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of all, the test referred to the change offiller particles' size and shape, as well as to dispersion ability and stability of the coating suspension. Cordierite was obtained by synthesis in a solid state, out of the mass consisting of kaoline, alumina, quartz, sepiolite. For characterization purposes, the following methods were used: X-ray diffraction, differential thermal analysis, SEM and optical microscopy. Mechanical activation of filler was performed in a vibrating mill. The upper boundary of the grain size was 100% -30 x 10-6 m, the times were (min): 15; 30; 60. The new composition of Lost foam refractory coatings has been developed with a change of the coating production process, as well. These newly synthesized coatings proved to be effective in terms of a positive influence on a surface quality, structural and mechanical properties of aluminium castings. Test results may be useful to have the Lost Foam refractory coatings specified together with other process parameters used for the production of castings according to this casting method.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings",
pages = "25-15",
number = "1",
volume = "51",
doi = "10.2298/SOS1901015P",
url = "conv_864"
}

Pavlović, M., Andrić, L., Radulović, D., Drmanić, S., Đorđević, N.,& Petrov, M.. (2019). Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 51(1), 15-25.
https://doi.org/10.2298/SOS1901015P
conv_864

Pavlović M, Andrić L, Radulović D, Drmanić S, Đorđević N, Petrov M. Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings. in Science of Sintering. 2019;51(1):15-25.
doi:10.2298/SOS1901015P
conv_864 .

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Drmanić, Saša, Đorđević, Nataša, Petrov, Milan, "Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings" in Science of Sintering, 51, no. 1 (2019):15-25,
https://doi.org/10.2298/SOS1901015P .,
conv_864 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Blagojev, Marina
PY  - 2018
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1060
AB  - This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
PB  - Bor : Mining and Metallurgy Institute Bor
C3  - 50th International October Conference on Mining and Metallurgy
T1  - Influence of the basalt structure and properties on development the cavitation damage
EP  - 158
SP  - 155
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Stojanović, Jovica and Radulović, Dragan and Petrov, Milan and Blagojev, Marina",
year = "2018",
abstract = "This paper analyzes the formation of cavitation damages depending on the technology of fabrication, structure and properties of basalt from the Vrelo-Kopaonik deposit. The methodology for monitoring the level of damage caused by cavitation and estimation the material life span base on parameters was developed: change in the mass loss, measurement the degradation level of the sample surface, dynamics of the formation of pits, changes in their average area surface, determination the line profile. A change in the surface morphology with the test time was followed by a scanning electron microscopy. The level of surface degradation of samples was quantified using the image analysis. The results indicate that the cast basalt has a high degree of cavitation resistance.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor, Bor : Mining and Metallurgy Institute Bor",
journal = "50th International October Conference on Mining and Metallurgy",
title = "Influence of the basalt structure and properties on development the cavitation damage",
pages = "158-155"
}

Pavlović, M., Dojčinović, M., Andrić, L., Stojanović, J., Radulović, D., Petrov, M.,& Blagojev, M.. (2018). Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 155-158.

Pavlović M, Dojčinović M, Andrić L, Stojanović J, Radulović D, Petrov M, Blagojev M. Influence of the basalt structure and properties on development the cavitation damage. in 50th International October Conference on Mining and Metallurgy. 2018;:155-158..

Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Stojanović, Jovica, Radulović, Dragan, Petrov, Milan, Blagojev, Marina, "Influence of the basalt structure and properties on development the cavitation damage" in 50th International October Conference on Mining and Metallurgy (2018):155-158.

TY  - CONF
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Petrov, Milan
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1059
AB  - This study presents the results of an investigation of high temperature materials – refractory filler based on cordierite, mullite and zircon for the synthesis of new refractory pattern coating and application in foundry. In order to obtain better properties of refractory fillers, special attention in the research was devoted to the preparation of fillers by grinding and mechanical activation. The application of the fillers for the synthesis of refractory pattern coatings and use in the new EPC casting process for obtained aluminum alloys and steel casting was shown positive results.
C3  - XVII Balkan Mineral Processing Congress
T1  - Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon
EP  - 612
SP  - 607
ER  - 

@conference{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Petrov, Milan",
year = "2017",
abstract = "This study presents the results of an investigation of high temperature materials – refractory filler based on cordierite, mullite and zircon for the synthesis of new refractory pattern coating and application in foundry. In order to obtain better properties of refractory fillers, special attention in the research was devoted to the preparation of fillers by grinding and mechanical activation. The application of the fillers for the synthesis of refractory pattern coatings and use in the new EPC casting process for obtained aluminum alloys and steel casting was shown positive results.",
journal = "XVII Balkan Mineral Processing Congress",
title = "Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon",
pages = "612-607"
}

Pavlović, M., Andrić, L., Radulović, D.,& Petrov, M.. (2017). Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon. in XVII Balkan Mineral Processing Congress, 607-612.

Pavlović M, Andrić L, Radulović D, Petrov M. Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon. in XVII Balkan Mineral Processing Congress. 2017;:607-612..

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Petrov, Milan, "Effect of micronized grinding on the quality of the fillers based on cordierite, mullite and zircon" in XVII Balkan Mineral Processing Congress (2017):607-612.

TY  - CONF
AU  - Trumbulović, Ljiljana
AU  - Pavlović, Marko
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1055
AB  - Hazardous products, although used in accordance with instructions, can become dangerous when people forget the warning that this is a dangerous product or when they unconsciously and irresponsibly handling. The aim of this paper is to highlight the problems and lack of knowledge and awareness of the harmful effects of these products on human health and environment.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Dangerous product in households
EP  - 269
SP  - 262
ER  - 

@conference{
author = "Trumbulović, Ljiljana and Pavlović, Marko and Radulović, Dragan and Petrov, Milan and Andrić, Ljubiša",
year = "2017",
abstract = "Hazardous products, although used in accordance with instructions, can become dangerous when people forget the warning that this is a dangerous product or when they unconsciously and irresponsibly handling. The aim of this paper is to highlight the problems and lack of knowledge and awareness of the harmful effects of these products on human health and environment.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Dangerous product in households",
pages = "269-262"
}

Trumbulović, L., Pavlović, M., Radulović, D., Petrov, M.,& Andrić, L.. (2017). Dangerous product in households. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 262-269.

Trumbulović L, Pavlović M, Radulović D, Petrov M, Andrić L. Dangerous product in households. in XII International Symposium on recycling technologies and sustainable development. 2017;:262-269..

Trumbulović, Ljiljana, Pavlović, Marko, Radulović, Dragan, Petrov, Milan, Andrić, Ljubiša, "Dangerous product in households" in XII International Symposium on recycling technologies and sustainable development (2017):262-269.

TY  - CONF
AU  - Trumbulović, Ljiljana
AU  - Pavlović, Marko
AU  - Radulović, Dragan
AU  - Petrov, Milan
AU  - Andrić, Ljubiša
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1056
AB  - Pharmaceutical waste is hazardous waste generated in the production and trade of medicines and medical supplies (including pharmaceuticals, drugs and chemicals that are scattered prepared and unused or have expired expiration date or be rejected for any reason, as well as organic pollutants), as well as equipment used in handling. The pharmaceutical waste include medicines (finished, galenical and main medicines and pharmaceutical substances) which is out of date. Herbal, traditional and homeopathic remedies can also be considered as pharmaceutical waste, depending on their composition. Producer and owner of pharmaceutical waste shall be treated with pharmaceutical waste as hazardous waste. Waste Management aims to protect human health and the environment with handling and disposal of waste.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - XII International Symposium on recycling technologies and sustainable development
T1  - Pharmaceutical waste managment
EP  - 277
SP  - 270
ER  - 

@conference{
author = "Trumbulović, Ljiljana and Pavlović, Marko and Radulović, Dragan and Petrov, Milan and Andrić, Ljubiša",
year = "2017",
abstract = "Pharmaceutical waste is hazardous waste generated in the production and trade of medicines and medical supplies (including pharmaceuticals, drugs and chemicals that are scattered prepared and unused or have expired expiration date or be rejected for any reason, as well as organic pollutants), as well as equipment used in handling. The pharmaceutical waste include medicines (finished, galenical and main medicines and pharmaceutical substances) which is out of date. Herbal, traditional and homeopathic remedies can also be considered as pharmaceutical waste, depending on their composition. Producer and owner of pharmaceutical waste shall be treated with pharmaceutical waste as hazardous waste. Waste Management aims to protect human health and the environment with handling and disposal of waste.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "XII International Symposium on recycling technologies and sustainable development",
title = "Pharmaceutical waste managment",
pages = "277-270"
}

Trumbulović, L., Pavlović, M., Radulović, D., Petrov, M.,& Andrić, L.. (2017). Pharmaceutical waste managment. in XII International Symposium on recycling technologies and sustainable development
Bor : University of Belgrade, Technical Faculty in Bor., 270-277.

Trumbulović L, Pavlović M, Radulović D, Petrov M, Andrić L. Pharmaceutical waste managment. in XII International Symposium on recycling technologies and sustainable development. 2017;:270-277..

Trumbulović, Ljiljana, Pavlović, Marko, Radulović, Dragan, Petrov, Milan, Andrić, Ljubiša, "Pharmaceutical waste managment" in XII International Symposium on recycling technologies and sustainable development (2017):270-277.

TY  - CONF
AU  - Pavlović, Marko
AU  - Andrić, Ljubiša
AU  - Radulović, Dragan
AU  - Čeganjac, Zoran
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/1057
AB  - For development of the refractory coatings with controlled rheologic properties, for application in new Lost Foam casting process, the influence of the mechanical activation on the talc-based filler’s properties change was examined. The test referred to the change of filler particles’ size and shape, as well as to dispersion ability and stability of the coating suspension. Optimization of the coating composition was attained chosing the right size and grain shape factor of the activated filler. In addition, different coating components were applied and the coating production procedure was altered. It was shown that application of this type of the water-based refractory coatings had a positive influence on surface quality, structure and mechanical properties of the aluminium alloy castings.
PB  - Bor : University of Belgrade, Technical Faculty in Bor
C3  - 49th International October Conference on Mining and Metallurgy
T1  - The influence of mechanical activation of talc-filler on the quality of the refractory coatings
EP  - 21
SP  - 18
ER  - 

@conference{
author = "Pavlović, Marko and Andrić, Ljubiša and Radulović, Dragan and Čeganjac, Zoran",
year = "2017",
abstract = "For development of the refractory coatings with controlled rheologic properties, for application in new Lost Foam casting process, the influence of the mechanical activation on the talc-based filler’s properties change was examined. The test referred to the change of filler particles’ size and shape, as well as to dispersion ability and stability of the coating suspension. Optimization of the coating composition was attained chosing the right size and grain shape factor of the activated filler. In addition, different coating components were applied and the coating production procedure was altered. It was shown that application of this type of the water-based refractory coatings had a positive influence on surface quality, structure and mechanical properties of the aluminium alloy castings.",
publisher = "Bor : University of Belgrade, Technical Faculty in Bor",
journal = "49th International October Conference on Mining and Metallurgy",
title = "The influence of mechanical activation of talc-filler on the quality of the refractory coatings",
pages = "21-18"
}

Pavlović, M., Andrić, L., Radulović, D.,& Čeganjac, Z.. (2017). The influence of mechanical activation of talc-filler on the quality of the refractory coatings. in 49th International October Conference on Mining and Metallurgy
Bor : University of Belgrade, Technical Faculty in Bor., 18-21.

Pavlović M, Andrić L, Radulović D, Čeganjac Z. The influence of mechanical activation of talc-filler on the quality of the refractory coatings. in 49th International October Conference on Mining and Metallurgy. 2017;:18-21..

Pavlović, Marko, Andrić, Ljubiša, Radulović, Dragan, Čeganjac, Zoran, "The influence of mechanical activation of talc-filler on the quality of the refractory coatings" in 49th International October Conference on Mining and Metallurgy (2017):18-21.