TY  - JOUR
AU  - Đorđević, M.T.
AU  - Aleksandrović, S.
AU  - Lazić, V.
AU  - Arsić, D.
AU  - Todić, A.
AU  - Patarić, Aleksandra
PY  - 2019
UR  - https://ritnms.itnms.ac.rs/handle/123456789/506
AB  - In this research, results of experimental investigations and physical model were used as the input variables for numerical analysis of the ironing strip drawing process by application of lubricants. The numerical simulation was realized in the specialized applicative software Simufact.forming. By applying the software for the 3D modeling, a model of the tool element assembly was made, which served as the starting basis for numerical simulation by application of the Finite Element Method. Experimental values of the friction coefficient for each type of lubricants and the contact pressures were used for defining the contact conditions. Numerical simulation of the drawing process was done for each type of the contact conditions between the tool's elements and the thin sheet sample. After conducted tests comparison of experimental and numerical results of the drawing forces in different contact conditions was done. Comparison was done with taking into account appearance of galling due to difficult drawing process conditions. By comparation of numerical results to the experimental one it is possible to interpret what types of simplifications were adopted in creating the experimental physical-tribological model.
PB  - Faculty of Engineering, University of Kragujevac
T2  - Proceedings on Engineering Sciences
T1  - The possibilities for application of numerical simulation in the ironing process of thin sheets
EP  - 412
IS  - 1
SP  - 405
VL  - 1
DO  - 10.24874/PES01.01.052
UR  - conv_1016
ER  - 

@article{
author = "Đorđević, M.T. and Aleksandrović, S. and Lazić, V. and Arsić, D. and Todić, A. and Patarić, Aleksandra",
year = "2019",
abstract = "In this research, results of experimental investigations and physical model were used as the input variables for numerical analysis of the ironing strip drawing process by application of lubricants. The numerical simulation was realized in the specialized applicative software Simufact.forming. By applying the software for the 3D modeling, a model of the tool element assembly was made, which served as the starting basis for numerical simulation by application of the Finite Element Method. Experimental values of the friction coefficient for each type of lubricants and the contact pressures were used for defining the contact conditions. Numerical simulation of the drawing process was done for each type of the contact conditions between the tool's elements and the thin sheet sample. After conducted tests comparison of experimental and numerical results of the drawing forces in different contact conditions was done. Comparison was done with taking into account appearance of galling due to difficult drawing process conditions. By comparation of numerical results to the experimental one it is possible to interpret what types of simplifications were adopted in creating the experimental physical-tribological model.",
publisher = "Faculty of Engineering, University of Kragujevac",
journal = "Proceedings on Engineering Sciences",
title = "The possibilities for application of numerical simulation in the ironing process of thin sheets",
pages = "412-405",
number = "1",
volume = "1",
doi = "10.24874/PES01.01.052",
url = "conv_1016"
}

Đorđević, M.T., Aleksandrović, S., Lazić, V., Arsić, D., Todić, A.,& Patarić, A.. (2019). The possibilities for application of numerical simulation in the ironing process of thin sheets. in Proceedings on Engineering Sciences
Faculty of Engineering, University of Kragujevac., 1(1), 405-412.
https://doi.org/10.24874/PES01.01.052
conv_1016

Đorđević M, Aleksandrović S, Lazić V, Arsić D, Todić A, Patarić A. The possibilities for application of numerical simulation in the ironing process of thin sheets. in Proceedings on Engineering Sciences. 2019;1(1):405-412.
doi:10.24874/PES01.01.052
conv_1016 .

Đorđević, M.T., Aleksandrović, S., Lazić, V., Arsić, D., Todić, A., Patarić, Aleksandra, "The possibilities for application of numerical simulation in the ironing process of thin sheets" in Proceedings on Engineering Sciences, 1, no. 1 (2019):405-412,
https://doi.org/10.24874/PES01.01.052 .,
conv_1016 .