TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Stojanović, Jovica
AU  - Pavlović, Vladimir
AU  - Andrić, Ljubiša
AU  - Olcan, Dragan
AU  - Đorđević, Antonije
PY  - 2017
UR  - https://ritnms.itnms.ac.rs/handle/123456789/432
AB  - The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated from a low-cost raw material, i.e. talc. The changes, induced by the alternations of the binders (bentonite, kaolin clay) and fluxing agents (BaCO3, feldspar), were monitored in the temperature range 1000 degrees to 1250 degrees C in which complete densification and re-crystallization of the investigated structures were accomplished. The critical points in the synthesis of steatite materials were assessed by instrumental analyses. Crystallinity changes and mineral phase transition during sintering were monitored by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy accompanied with EDS mapping. The thermal stability was observed on the green mixtures using differential thermal and thermo gravimetric analyses. Electrical measurements recorded variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the sintering temperature. The investigation highlighted critical design points, as well as the optimal combinations of the raw materials for production of the steatite ceramics for advanced electrical engineering applications.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
EP  - 13275
IS  - 16
SP  - 13264
VL  - 43
DO  - 10.1016/j.ceramint.2017.07.024
UR  - conv_806
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Stojanović, Jovica and Pavlović, Vladimir and Andrić, Ljubiša and Olcan, Dragan and Đorđević, Antonije",
year = "2017",
abstract = "The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated from a low-cost raw material, i.e. talc. The changes, induced by the alternations of the binders (bentonite, kaolin clay) and fluxing agents (BaCO3, feldspar), were monitored in the temperature range 1000 degrees to 1250 degrees C in which complete densification and re-crystallization of the investigated structures were accomplished. The critical points in the synthesis of steatite materials were assessed by instrumental analyses. Crystallinity changes and mineral phase transition during sintering were monitored by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy accompanied with EDS mapping. The thermal stability was observed on the green mixtures using differential thermal and thermo gravimetric analyses. Electrical measurements recorded variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the sintering temperature. The investigation highlighted critical design points, as well as the optimal combinations of the raw materials for production of the steatite ceramics for advanced electrical engineering applications.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials",
pages = "13275-13264",
number = "16",
volume = "43",
doi = "10.1016/j.ceramint.2017.07.024",
url = "conv_806"
}

Terzić, A., Obradović, N., Stojanović, J., Pavlović, V., Andrić, L., Olcan, D.,& Đorđević, A.. (2017). Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials. in Ceramics International
Elsevier Sci Ltd, Oxford., 43(16), 13264-13275.
https://doi.org/10.1016/j.ceramint.2017.07.024
conv_806

Terzić A, Obradović N, Stojanović J, Pavlović V, Andrić L, Olcan D, Đorđević A. Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials. in Ceramics International. 2017;43(16):13264-13275.
doi:10.1016/j.ceramint.2017.07.024
conv_806 .

Terzić, Anja, Obradović, Nina, Stojanović, Jovica, Pavlović, Vladimir, Andrić, Ljubiša, Olcan, Dragan, Đorđević, Antonije, "Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials" in Ceramics International, 43, no. 16 (2017):13264-13275,
https://doi.org/10.1016/j.ceramint.2017.07.024 .,
conv_806 .

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir
AU  - Olcan, Dragan
AU  - Đorđević, Antonije
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/395
AB  - Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, components of portable electronic devices, etc. In order to reduce production costs and modify cordierite-based materials, mechanical activation can be used. In this study, microstructural and electrical properties of mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for the time periods from 0 to 160 min. Morphological investigations have been performed on the obtained powders. The effects of activation and two-step sintering process on microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of time of mechanical treatment.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique
EP  - 165
IS  - 2
SP  - 157
VL  - 48
DO  - 10.2298/SOS1602157O
UR  - https://hdl.handle.net/21.15107/rcub_dais_2314
UR  - conv_766
ER  - 

@article{
author = "Obradović, Nina and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Pavlović, Vladimir and Olcan, Dragan and Đorđević, Antonije and Kachlik, Martin and Maca, Karel",
year = "2016",
abstract = "Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, components of portable electronic devices, etc. In order to reduce production costs and modify cordierite-based materials, mechanical activation can be used. In this study, microstructural and electrical properties of mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for the time periods from 0 to 160 min. Morphological investigations have been performed on the obtained powders. The effects of activation and two-step sintering process on microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of time of mechanical treatment.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique",
pages = "165-157",
number = "2",
volume = "48",
doi = "10.2298/SOS1602157O",
url = "https://hdl.handle.net/21.15107/rcub_dais_2314, conv_766"
}

Obradović, N., Filipović, S., Đorđević, N., Kosanović, D., Pavlović, V., Olcan, D., Đorđević, A., Kachlik, M.,& Maca, K.. (2016). Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 48(2), 157-165.
https://doi.org/10.2298/SOS1602157O
https://hdl.handle.net/21.15107/rcub_dais_2314

Obradović N, Filipović S, Đorđević N, Kosanović D, Pavlović V, Olcan D, Đorđević A, Kachlik M, Maca K. Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique. in Science of Sintering. 2016;48(2):157-165.
doi:10.2298/SOS1602157O
https://hdl.handle.net/21.15107/rcub_dais_2314 .

Obradović, Nina, Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Pavlović, Vladimir, Olcan, Dragan, Đorđević, Antonije, Kachlik, Martin, Maca, Karel, "Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique" in Science of Sintering, 48, no. 2 (2016):157-165,
https://doi.org/10.2298/SOS1602157O .,
https://hdl.handle.net/21.15107/rcub_dais_2314 .

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Pavlović, Vladimir
AU  - Olcan, Dragan
AU  - Đorđević, Antonije
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2016
UR  - https://ritnms.itnms.ac.rs/handle/123456789/393
AB  - The mechanical activation can help reduce production costs and modify cordierite-based materials. In this study, the structure and electrical properties of the mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for time periods ranging from 0 to 160 min. Structural investigations were performed on the obtained powders. The effects of activation and a two-step sintering process on the microstructure and crystal structure were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The thermal stability was analyzed using DTA. Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the time of mechanical treatment.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics
EP  - 13918
IS  - 12
SP  - 13909
VL  - 42
DO  - 10.1016/j.ceramint.2016.05.201
UR  - conv_763
UR  - https://hdl.handle.net/21.15107/rcub_dais_2322
ER  - 

@article{
author = "Obradović, Nina and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Pavlović, Vladimir and Olcan, Dragan and Đorđević, Antonije and Kachlik, Martin and Maca, Karel",
year = "2016",
abstract = "The mechanical activation can help reduce production costs and modify cordierite-based materials. In this study, the structure and electrical properties of the mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for time periods ranging from 0 to 160 min. Structural investigations were performed on the obtained powders. The effects of activation and a two-step sintering process on the microstructure and crystal structure were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The thermal stability was analyzed using DTA. Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the time of mechanical treatment.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics",
pages = "13918-13909",
number = "12",
volume = "42",
doi = "10.1016/j.ceramint.2016.05.201",
url = "conv_763, https://hdl.handle.net/21.15107/rcub_dais_2322"
}

Obradović, N., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Pavlović, V., Olcan, D., Đorđević, A., Kachlik, M.,& Maca, K.. (2016). Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics. in Ceramics International
Elsevier Sci Ltd, Oxford., 42(12), 13909-13918.
https://doi.org/10.1016/j.ceramint.2016.05.201
conv_763

Obradović N, Filipović S, Đorđević N, Kosanović D, Marković S, Pavlović V, Olcan D, Đorđević A, Kachlik M, Maca K. Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics. in Ceramics International. 2016;42(12):13909-13918.
doi:10.1016/j.ceramint.2016.05.201
conv_763 .

Obradović, Nina, Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Marković, Smilja, Pavlović, Vladimir, Olcan, Dragan, Đorđević, Antonije, Kachlik, Martin, Maca, Karel, "Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics" in Ceramics International, 42, no. 12 (2016):13909-13918,
https://doi.org/10.1016/j.ceramint.2016.05.201 .,
conv_763 .