Chemical Thermodynamic Processes at Metal-Mold Interface
![](/themes/Mirageritnms//images/openAccess.png)
2013
Autori
Janjusević, ZoranGulišija, Zvonko
Mihailović, Marija
![](/themes/Mirageritnms/images/orcid.png)
Patarić, Aleksandra
![](/themes/Mirageritnms/images/orcid.png)
Sokić, Miroslav
![](/themes/Mirageritnms/images/orcid.png)
Marković, Branislav
![](/themes/Mirageritnms/images/orcid.png)
Matković, Vladislav
Članak u časopisu (Objavljena verzija)
![](/themes/Mirageritnms//images/creativecommons/arr.png)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
At the contact surface between the liquid metal and the mold wall a number of chemical and thermodynamical reactions were taken. The products of those reactions are spread out on both the sides, i.e., in the solidified metal or into the mold wall. The processes which took place in the casting mold-here made from sand mix, during the pouring of liquid metal, solidification and cooling down to room temperature, are pretty complex. The thermodynamic reactions at the contact surface of liquid metal/sand mold in the process of castings forming are discussed in this paper. Experiments were performed in molds made by CO2 sand casting process. As a pouring metal we used steels from an ordinary production program of a steel foundry, exactly it was the steel GS 50CrMo4, assigned by DIN. Some results obtained in our investigations during studying those processes are shown here.
Ključne reči:
thermodynamic processes / mold / metal / chemical processes / casting processIzvor:
Materials Transactions, 2013, 54, 10, 1925-1929Izdavač:
- Japan Inst Metals, Sendai
Finansiranje / projekti:
- Razvoj tehnoloških postupaka livenja pod uticajem elektromagnetnog polja i tehnologija plastične prerade u toplom stanju četvorokomponentnih legura Al-Zn za specijalne namene (RS-MESTD-Technological Development (TD or TR)-34002)
- Razvoj tehnoloških procesa prerade nestandardnih koncentrata bakra u cilju optimizacije emisije zagađujućih materija (RS-MESTD-Technological Development (TD or TR)-34023)
DOI: 10.2320/matertrans.M2013190
ISSN: 1345-9678
WoS: 000327687800009
Scopus: 2-s2.0-84884946485
Institucija/grupa
Institut za tehnologiju nuklearnih i drugih mineralnih sirovinaTY - JOUR AU - Janjusević, Zoran AU - Gulišija, Zvonko AU - Mihailović, Marija AU - Patarić, Aleksandra AU - Sokić, Miroslav AU - Marković, Branislav AU - Matković, Vladislav PY - 2013 UR - https://ritnms.itnms.ac.rs/handle/123456789/267 AB - At the contact surface between the liquid metal and the mold wall a number of chemical and thermodynamical reactions were taken. The products of those reactions are spread out on both the sides, i.e., in the solidified metal or into the mold wall. The processes which took place in the casting mold-here made from sand mix, during the pouring of liquid metal, solidification and cooling down to room temperature, are pretty complex. The thermodynamic reactions at the contact surface of liquid metal/sand mold in the process of castings forming are discussed in this paper. Experiments were performed in molds made by CO2 sand casting process. As a pouring metal we used steels from an ordinary production program of a steel foundry, exactly it was the steel GS 50CrMo4, assigned by DIN. Some results obtained in our investigations during studying those processes are shown here. PB - Japan Inst Metals, Sendai T2 - Materials Transactions T1 - Chemical Thermodynamic Processes at Metal-Mold Interface EP - 1929 IS - 10 SP - 1925 VL - 54 DO - 10.2320/matertrans.M2013190 UR - conv_672 ER -
@article{ author = "Janjusević, Zoran and Gulišija, Zvonko and Mihailović, Marija and Patarić, Aleksandra and Sokić, Miroslav and Marković, Branislav and Matković, Vladislav", year = "2013", abstract = "At the contact surface between the liquid metal and the mold wall a number of chemical and thermodynamical reactions were taken. The products of those reactions are spread out on both the sides, i.e., in the solidified metal or into the mold wall. The processes which took place in the casting mold-here made from sand mix, during the pouring of liquid metal, solidification and cooling down to room temperature, are pretty complex. The thermodynamic reactions at the contact surface of liquid metal/sand mold in the process of castings forming are discussed in this paper. Experiments were performed in molds made by CO2 sand casting process. As a pouring metal we used steels from an ordinary production program of a steel foundry, exactly it was the steel GS 50CrMo4, assigned by DIN. Some results obtained in our investigations during studying those processes are shown here.", publisher = "Japan Inst Metals, Sendai", journal = "Materials Transactions", title = "Chemical Thermodynamic Processes at Metal-Mold Interface", pages = "1929-1925", number = "10", volume = "54", doi = "10.2320/matertrans.M2013190", url = "conv_672" }
Janjusević, Z., Gulišija, Z., Mihailović, M., Patarić, A., Sokić, M., Marković, B.,& Matković, V.. (2013). Chemical Thermodynamic Processes at Metal-Mold Interface. in Materials Transactions Japan Inst Metals, Sendai., 54(10), 1925-1929. https://doi.org/10.2320/matertrans.M2013190 conv_672
Janjusević Z, Gulišija Z, Mihailović M, Patarić A, Sokić M, Marković B, Matković V. Chemical Thermodynamic Processes at Metal-Mold Interface. in Materials Transactions. 2013;54(10):1925-1929. doi:10.2320/matertrans.M2013190 conv_672 .
Janjusević, Zoran, Gulišija, Zvonko, Mihailović, Marija, Patarić, Aleksandra, Sokić, Miroslav, Marković, Branislav, Matković, Vladislav, "Chemical Thermodynamic Processes at Metal-Mold Interface" in Materials Transactions, 54, no. 10 (2013):1925-1929, https://doi.org/10.2320/matertrans.M2013190 ., conv_672 .