Characterization of pellet samples obtained by peletization of limestone and seaweed
Аутори
Jovanović, VladimirTodorović, Dejan
Ivošević, Branislav
Radulović, Dragan
Milićević, Sonja
Nišić, Dragana
Остала ауторства
Stojadinović, SašaPetrović, Dejan
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents the results of physico-chemical characterization of both the initial samples of lithotamnian
limestone and seaweed (Ascophyllum Nodosum), and the products of aggregation of their mixtures in different
ratios by the pelletization process. The initial samples were waste limestone from filter plants and dried seaweed.
The final product of the pelletization process should serve the needs of agriculture as a means of biostimulation
and can also be used in raising the pH levels of acidic soils. Several different pellet formulations were obtained by
the process of discontinuous pelletization, and also by using a simulation of the continuous pelletization process on
a pelletization plate. Tests of the mechanical properties of the pellets showed that the best results are shown by the
pellets of the 4K sample, which were obtained by a continuous pelletization process with a mutual ratio of seaweed
and limestone of 70:30%.
Кључне речи:
litotamnian / limestone / seaweed / pelletizationИзвор:
52nd International October Conference on Mining and Metallurgy IOC 2021, 2021, 205-208Издавач:
- Bor : University of Belgrade, Technical Faculty in Bor
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200023 (Институт за технологију нуклеарних и других минералних сировина - ИТНМС, Београд) (RS-MESTD-inst-2020-200023)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
Институција/група
Institut za tehnologiju nuklearnih i drugih mineralnih sirovinaTY - CONF AU - Jovanović, Vladimir AU - Todorović, Dejan AU - Ivošević, Branislav AU - Radulović, Dragan AU - Milićević, Sonja AU - Nišić, Dragana PY - 2021 UR - https://ritnms.itnms.ac.rs/handle/123456789/1152 AB - This paper presents the results of physico-chemical characterization of both the initial samples of lithotamnian limestone and seaweed (Ascophyllum Nodosum), and the products of aggregation of their mixtures in different ratios by the pelletization process. The initial samples were waste limestone from filter plants and dried seaweed. The final product of the pelletization process should serve the needs of agriculture as a means of biostimulation and can also be used in raising the pH levels of acidic soils. Several different pellet formulations were obtained by the process of discontinuous pelletization, and also by using a simulation of the continuous pelletization process on a pelletization plate. Tests of the mechanical properties of the pellets showed that the best results are shown by the pellets of the 4K sample, which were obtained by a continuous pelletization process with a mutual ratio of seaweed and limestone of 70:30%. PB - Bor : University of Belgrade, Technical Faculty in Bor C3 - 52nd International October Conference on Mining and Metallurgy IOC 2021 T1 - Characterization of pellet samples obtained by peletization of limestone and seaweed EP - 208 SP - 205 ER -
@conference{ author = "Jovanović, Vladimir and Todorović, Dejan and Ivošević, Branislav and Radulović, Dragan and Milićević, Sonja and Nišić, Dragana", year = "2021", abstract = "This paper presents the results of physico-chemical characterization of both the initial samples of lithotamnian limestone and seaweed (Ascophyllum Nodosum), and the products of aggregation of their mixtures in different ratios by the pelletization process. The initial samples were waste limestone from filter plants and dried seaweed. The final product of the pelletization process should serve the needs of agriculture as a means of biostimulation and can also be used in raising the pH levels of acidic soils. Several different pellet formulations were obtained by the process of discontinuous pelletization, and also by using a simulation of the continuous pelletization process on a pelletization plate. Tests of the mechanical properties of the pellets showed that the best results are shown by the pellets of the 4K sample, which were obtained by a continuous pelletization process with a mutual ratio of seaweed and limestone of 70:30%.", publisher = "Bor : University of Belgrade, Technical Faculty in Bor", journal = "52nd International October Conference on Mining and Metallurgy IOC 2021", title = "Characterization of pellet samples obtained by peletization of limestone and seaweed", pages = "208-205" }
Jovanović, V., Todorović, D., Ivošević, B., Radulović, D., Milićević, S.,& Nišić, D.. (2021). Characterization of pellet samples obtained by peletization of limestone and seaweed. in 52nd International October Conference on Mining and Metallurgy IOC 2021 Bor : University of Belgrade, Technical Faculty in Bor., 205-208.
Jovanović V, Todorović D, Ivošević B, Radulović D, Milićević S, Nišić D. Characterization of pellet samples obtained by peletization of limestone and seaweed. in 52nd International October Conference on Mining and Metallurgy IOC 2021. 2021;:205-208..
Jovanović, Vladimir, Todorović, Dejan, Ivošević, Branislav, Radulović, Dragan, Milićević, Sonja, Nišić, Dragana, "Characterization of pellet samples obtained by peletization of limestone and seaweed" in 52nd International October Conference on Mining and Metallurgy IOC 2021 (2021):205-208.