Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics
2021
Autori
Đorđević, NatašaPeleš, Adriana
Obradović, Nina
Vlahović, Milica
Mihajlović, Slavica
Martinović, Sanja
Ostala autorstva
Stević, ZoranKonferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with
5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction
pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C
for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure
of both compacted and sintered samples. Atomic force microscope was used to investigate
the surface of the sintered samples. This paper investigates the influence of prolonged sintering time
on the densities of the sintered samples, along with electrical properties.
Ključne reči:
mechanical activation / density / SEM / cordieriteIzvor:
9th International Conference on Renewable Electrical Power Sources, 2021, 265-268Izdavač:
- Belgrade : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources
- Belgrade : Society for Renewable Electrical Power Sources
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200023 (Institut za tehnologiju nuklearnih i drugih mineralnih sirovina - ITNMS, Beograd) (RS-MESTD-inst-2020-200023)
Institucija/grupa
Institut za tehnologiju nuklearnih i drugih mineralnih sirovinaTY - CONF AU - Đorđević, Nataša AU - Peleš, Adriana AU - Obradović, Nina AU - Vlahović, Milica AU - Mihajlović, Slavica AU - Martinović, Sanja PY - 2021 UR - https://ritnms.itnms.ac.rs/handle/123456789/1136 AB - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties. PB - Belgrade : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources PB - Belgrade : Society for Renewable Electrical Power Sources C3 - 9th International Conference on Renewable Electrical Power Sources T1 - Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics EP - 268 SP - 265 ER -
@conference{ author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja", year = "2021", abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.", publisher = "Belgrade : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, Belgrade : Society for Renewable Electrical Power Sources", journal = "9th International Conference on Renewable Electrical Power Sources", title = "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics", pages = "268-265" }
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in 9th International Conference on Renewable Electrical Power Sources Belgrade : Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources., 265-268.
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in 9th International Conference on Renewable Electrical Power Sources. 2021;:265-268..
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics" in 9th International Conference on Renewable Electrical Power Sources (2021):265-268.